Post Buy Requirement
Taknik Vyapar Private Limited
Kolkata, West Bengal, India
gstGST : 19AAECT8778R1Z0 Verified Add Review

Other Products / Services

Welding Cable

  • Material Copper
  • Thickness 1.5-2mm
  • Certification CE Certified
  • Voltage 220V
  • Power 1-3kw
  • Feature Crack Free, Durable, Water Proof
View Complete Details

CO2 Regulator Pre Heater

  • Material Brass, Plastic
  • Certification ISI Certified
  • Application Gas Use
  • Voltage 220 V and 110 V AC single phase
  • Power 70 Watts
  • Connection 5/8” BSP RH

Details :

  • Easy installation between CO2 cylinder and regulator
  • Efficiently radiates heat to the gas stream
  • Lower power consumption with quick warming
  • Solid brass rod fittings for inlet and outlet connections
View Complete Details

Brass Cable Connector

  • Material Brass
  • Certification CE Certified
  • Color Black
  • Power 1-3kw
  • Feature Crack Free, Durable, High Ductility
  • Surface Polished
View Complete Details

Manual Gas Cutting Blow Pipe

  • Type Manual
  • Material Metal
  • Application Industrial Use
  • Color Golden, Black
  • Feature Fine Finished, Light Weight, Rustproof
  • Finishing Polished

Manual cutting blow pipe, is a well balanced injector type or nozzle mixing type, capable of cutting mild steel up to a thickness of 300mm. It can be used either dissolved acetylene in cylinder or with low pressure generated Acetylene. With a suitable nozzle, it can be used with LPG also. Its special designed body and head are of forged brass, eliminating casting porosity, ensuring total safety and backfire.

Details :

  • Forged Brass Body with Multi Fuel Gas Operation.
  • Cutting Range : 3.00 Mm to 300 Mm (mild Steel).
  • Accurate Flowrate Provides Excellent Cutting Quality.
  • Optium Gas Consumption.
  • Flame Setting By Operation Easily.
  • Light Weight, Confortable Working for Long Durations.
  • Inlet Connections : 3/8” Bsp (rh) for Oxygen & 3/8” Bsp (lh) for Fuel Gas.
  • IS : 7653 : 1975 Approved.
View Complete Details

Welding Holder

  • Type Portable
  • Certification ISI Certified
  • Application Electrode Use
  • Color Black
  • Finishing Polished
  • Feature Accuracy Durable, Corrosion Resistance, High Quality

Suitable for adverse welding conditions like shipbuilding or welding in enclosed conditions like vessels, etc. Available in 02 (Two) ranges of rated current i.e. 400 amps and 600 amps. It is designed for safe and comfortable welding, provides easy and effective connections of cable to holder. Its jaws are mode of non – ferrous metal alloy, provide longer service life.

Safety Features and Product Improvement of Fully / Semi Insulated Electrode Holder

  • Insulation resistance test shall be measured using a DC voltage of 500 volts
  • High voltage test shall be measured using 1000 volts and 2000 volts
  • Temperature rise test shall be carried out for 02 hrs as per IS:2641:1989, clause 3, 5
  • Test for flammability and resistance to heat shall be carries out as per IS:2641:1989 clause 3, 5, 7
  • Impact test by vertical fall and lateral test shall be carried out as per IS:2641:1989 clause 3, 5, 6

COPPER CONDUCTOR

HOFR/TRS HOFR TRS HOFR/TRS HOFR/TRS HOFR AT
90 DEG. C
TRS AT 90
DEG. C
25 228 161 2.0 0.780 0.997 0.903
35 285 201 2.0 0.554 0.708 0.641
50 360 25 2.2 0.386 0.492 0.446
70 454 320 2.4 0.272 0.347 0.314
95 547 386 2.6 0.206 0.263 0.239

 



View Complete Details

CNC Machining Services

Taknik Vyapar Private Limited is an expert in CNC machining services in West Bengal and known for highly accurate, finest, fully functioning or master patterns. Whether you want custom CNC prototype or precision machined parts, we provide you with the right CNC machining options for all kinds of machines with on-demand manufacturing and quick delivery. Choosing our services have several benefits which include :

  • Improve machining accuracy.
  • Creates flexibility in the manufacturing process.
  • It also increases safety.
  • Reduces set-up change over time.
  • Boosts the production volume.

 

We provide our customers with the best services at an affordable price. To know more about our machining services, contact us. We provide our customers with the necessary details before and believe in transparent business policies.

View Complete Details

Portable Gas Cutting Machine

Portable cutting machines are suitable for cutting ferrous metal sheets and plates in straight direction with oxy – fuel gas. The machine is moved on an aluminium track specially designed for this purpose. You can adjust the speed of the machine according to the thickness of the cutting metals by speed controller knob. The machine can be moved in the forward and reverse direction with the help of switch.

Features :

  • Pressed steel body with ventilation holes reduces overheating of parts
  • Light and easily portable with simple control
  • Circle cutting can be done with an attachment
  • Dynamically balanced armature for smooth drive
  • Smooth and precise horizontal & vertical adjustment of cutter
  • Asbestos heat shield protects the motor from heat during cutting
  • Precise control at low & high speeds
  • Hose connection : ¼” BSP RH for O2 & ¼” BSP LH for Fuel gas
  • Input voltage : 23 volts single phase 50 Hz

Specifications

PRODUCT CODE CUTTER TYPE CUTTING RANGE
PCM075 INJECTOR MIXING, 02-SEAT NOZZLE 03MM TO 75MM
PCM100 NOZZLE MIXING, 03-SEAT NOZZLE 03MM TO 100MM
PCM150 NOZZLE MIXING, 03-SEAT NOZZLE 03MM TO 150MM
PROFILE PROFILE CUTTING MACHINE 03MM TO 100MM

 

View Complete Details

Inverter Type Welding Machine

Features :

  • Compact Size & Light Weight.
  • High Quality & Power Saving Design.
  • Hot Start Function.
  • Stable & Reliable Multi – Function.
  • Automatic Voltage Reduction Coupled with An Anti – Stick Function.

Specifications

  ARC 200 ARC 250 ARC 400 ARC/TI G 200 ARC/TI G 400 MI G 250 MI G 400
IGBT/MOSFET MOSFET MOSFET MOSFET MOSFET MOSFET MOSFET MOSFET
PHASE 1 3 3 1 3 3 3
INPUT VOLTAGE (V
±15%)
AC 230 AC 415 AC 415 AC 230 AC 415 AC 415 AC 415
FREQUENCY
(Hz)
50/60 50/60 50/60 50/60 50/60 50/60 50/60
INPUT POWER
CAPACITY
(KVA)
06.00 09.40 18.20 06.00 /
06.00
13.10 /
18.20
08.50 14.00
OUTPUT CURRENT
RANGE (A)
10 – 200 20 – 250 30 – 400 07 – 200 07 – 400 50 – 250 50 – 400
POWER
FACTOR
0.73 0.93 0.93 0.73 0.93 0.73 0.93
NET WEIGHT
(Kg.)
8 17.50 26.50 9 28 9 36
DIMENSION
(INCH)
15.5*6*1
1.5
20*8*13 22.5*12*
20
15.5*6*1
2
22.5*17*
16
15.5*6*1
2
21.5*11*
21.5
DIAMETER OF
ROD/WIRE
2.50 –
3.15
2.50 –
4.00
2.50 –
5.00
2.50 –
3.15
2.50 –
5.00
0.6 – 0.8 0.8 – 1.2
WIRE FEEDER
SPEED
(M/MIN.)
- - - - - 2.5 – 18 3.0 – 24

 

























View Complete Details

Electrode Drying Oven

TAKNIK cabinet type drying oven ensures longer life of electrode at store, specially for re – drying the electrode having excess moisture than the consistent capacity of the flux of electrode. It is designed as a cabinet type store containing five self trays of weight 25/50 kgs of electrode (approx.). It has front opening door with lock facility. Normally, any special / low hydrogen electrode should be re – dried for one hour as 150 deg. C to 250 deg. C before use to exit excess moisture contained in the quoted flux.

TAKNIK portable carrying oven is a unit suitable for re - drying the M.S. Electrode at shop floor beside the use area. It can be used for 30 – 40 pcs electrode at a time with 230 volts single phase.

Specifications

SPECIFICATION CABINET OVEN PORTABLE OVEN
AC CURRENT
PORTABLE OVEN
DC CURRENT
Input Supply 230 V AC Single
phase 50Hz ± 10%
230 V AC Single
phase 50Hz ± 10%
24 V DC Single
phase 50Hz ± 10%
Input Current 8.5 A (approx.) 0.5 A (approx.) 15 A (approx.)
Input Power 1800 Watts 100 Watts 400 Watts
Temperature Range 50 deg. C – 250
deg. C
100 deg. C (max) 100 deg. C (max)
Type of Control Thermostatic - -
Number of trays 5 - -
Storage space 300 * 480 mm
(approx)
62 * 480 mm
(Approx)
62 * 480 mm
(Approx)
Dimensions 450*600*630 mm
(approx)
125*510 mm
(approx)
125*510 mm
(approx)

 













View Complete Details

Argon Flowmeter

  • Material Metal & Plastic
  • Shape Round
  • Argon 2.5 CGA 580 9/16”
  • Carbon Dioxide 2.5 CGA 320 9/16”
  • Size Standard
  • Waranty 1 Year

Provided for accurate measurement of gas flow in welding, laboratory applications

  • Machined brass body
  • Polycarbonate flow tube and outlet cover are impact resistant for maximum durability
  • Compact light weight construction
  • Designed for MIG & TIG applications and provide accurate regulator of gas flow
  • Dual scale gauge with unbreakable polycarbonate lens for durability
  • 10 feet 3m hose for use with Argon / CO2 shielding gases for option
View Complete Details

Welding Goggles

  • Type Fancy
  • Shape Oval, Round
  • Certification ANSI Certified
  • Color Black
  • Feature Anti Fog, Durable, Heat Resistance
  • Application Eye Protection
View Complete Details

Manual Gas Heating & Welding Blow Pipe

  • Type Manual
  • Material Metal, PVC
  • Shape Round
  • Certification ISI Certified
  • Color Metallic
  • Surface Finishing Coated

Welding Blow Pipe
Suitable for Medium and Heavy Gas Welding applications. An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips nozzles suitable for welding mild steel in the range of 1.00mm to 12.00mm thickness. The blowpipe is supplied complete with hose connections, spanner, operating data card and 06 nos.

Shower Type Heating Torch

  • Shower type heating torch 01 mtr. long to be used with Oxy fuel gas for heavy duty heating purpose in work shower.
  • Additional tips technical duties nozzle may be supplied on demand.
  • Both the body and legs are forged from extruded brass rod to remove any chances of casting porosity.
  • The special injector type design ensures continuous and trouble free service.
  • The low pressure welding blowpipe can be used for Welding in shop floors, automobile repair workshops and other general applications.
  • The blowpipe can be used with either LPG or Acetylene as the fuel gas.
View Complete Details

TPR Welding Hose Pipe

  • Material Thermoplastic Rubber
  • Color Blue for Oxygen & other Non – fuel gas Red for Fuel gases.
  • Pressure High
  • Thickness 5-10mm
  • Feature Durable, Easy To Use, Scratch Proof
  • Temperature -40 Deg. F to 160 Deg. F

Specifications

NOMINAL BORE IN MM TOLERANCE ON NOMINAL BORE IN MM MINIMUM THICKNESS OF TUBE IN MM MINIMUM
THICK
NESS
OF
COVER
IN MM
WORKING
PRESS
URE
KGF/C
M2
TESTING
PRESS
URE
KGF/C
M2
06.0 ± 0.75 1.50 1.00 12.5 25
08.0 0.75 1.50 1.00 12.5 25
10.00 0.75 1.50 1.00 12.5 25

 














View Complete Details

Argon & TIG Welding Rod

  • Material Aluminium, Brass
  • Shape Round
  • Thickness 3.5-4mm
  • Certification ISI Certified
  • Application Welding Purpose
  • Color Black, Grey

TIG Rods and Tungsten
In TIG welding, there’s a lot going on. You have a shielding gas, usually argon, running through the torch. You have an electrode that’s made of tungsten, which is an extremely hard steel that stands up to high heat. But depending on the weld metal, the electrode needs a special alloy ingredient added so it can provide a stable arc and uncontaminated weld.

Finally, you’ll often be welding with filler rod in your other hand. That makes three consumables that get used up and replaced periodically.

Tungsten Electrodes
Technically, the tungsten used in welding is not viewed as a consumable, since it’s not meant to serve as filler rod. A seasoned welder can make a tungsten electrode last a long time. A newbie, on the either hand, may go through one seven-inch tungsten every week. The electrodes are packed in various quantities (10 packs are the most popular). They come in seven or three inch lengths, which correspond to the two standard tips are available with TIG torches. The electrodes come in a range of diameters similar to stick welding.

View Complete Details

Welding Hand Helmet

  • Size Standard
  • Material Fiber, Plastic
  • Shape Rectangle
  • Style Full Face
  • Color Black
  • Pattern Plain
  • Feature Fine Finishing, Heat Resistant, Light Weight
  • Certifications ISI Certified
View Complete Details

Flashback Arrester

  • Type Flashback
  • Material Brass
  • Shape Round
  • Color Golden
  • Size Standard
  • Surface Polished

The safety “Flash back arrestor” is exclusively designed to eliminate every possibility of explosion or fire caused by flashback due to any reason. The flashback arrestor is useful for fitting on Gas Regulator & Welding / Heating / Cutting blowpipe. This safety device cuts off the gas flow in case of back fire.

It provides device to easy flow of gas during normal operation of Welding / Cutting but seize fire as soon as fire reach to the fire arresting device provided there in. Beside it Non return valve is also provided which locks the gas pressure if any adverse / excess flow pressure occurs in device due to any reason. Non return valve becomes normal as soon as flow come in its normal operation.

Featrues :

  • Heavy duty brass rod shell construction
  • Dry type flashback arrestor
  • A spring loaded non – return valve prevents slow or sudden back flow of gas
  • Flame trap to cool the flame front
  • Simple and trouble free installation
  • Available for cutter end (oxygen & fuel gas) and regulator end (oxygen & fuel gas)


Two types of safety valve

  • Non – return valve – Without sintered filter
  • Flash back arrestor – With sintered filter
View Complete Details

Welding Head Helmet

200 - 600 /pc Get Latest Price
  • Size Standard
  • Material Fiber, Plastic
  • Shape Rectangle
  • Style Full Face
  • Color Black
  • Feature Fine Finishing, Light Weight, Safe In Use
  • Pattern Plain
  • Certifications ISI Certified
View Complete Details

Manual Blow Pipe Cutting Nozzle

Solid Telurium Copper Swaged Cutting Nozzle for Head Mixing and Pre – Mixing System for Acetylene

  • Mixing principal, Oxy/Acetylene gases
  • Preheat cones are close together to promote better economy of gases
  • Preheat holes are available 6, 8&9 depends upon the thickness of metal to be cut
  • Cutting capacity 1/8” to 12” thick
  • 09 sizes of central hole available for cutting different thickness of metal
  • 45 degree 02 seat cone
  • Can be used for hand cutting or Machine cutting


Two Piece Nozzle for Natural Gas / Propane

  • Mixing principal, Oxy/Natural gas or Propane
  • Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases
  • 02 seat, 45 degree cone
  • 09 sizes of central holes are available.
  • Cutting capacity 1/8” to 12” thick
  • Can be used for hand cutting and Machine cutting
  • Pre-heat slots are available 12, 15&20 slots according to thickness of metal to be cut
  • Do not use Acetylene


Two Piece Nozzle for Natural Gas / Propane

  • 03-seat cone 30 degree
  • Turbulence effect provided at Gas mixing chamber which help to achieve proper heat output
  • Mixing principal at nozzle
  • Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases.
  • 09 sizes of central holes are available
  • Cutting capacity 1/8” to 12” thick
  • Can be used for Hand cutting and Machine cutting
  • Pre-heat slots are available 12, 15&20 slots according to thickness of metals to be cut
  • Do not use Acetylene.


Solid Telurium Copper Swaged Cutting Nozzle

  • Mixing principal at Nozzle
  • Preheat cones are close together to promote better economy of gases
  • Preheat holes are available 6, 8&9 depends upon the thickness of metal to be cut
  • Cutting capacity 1/8” to 12” thick
  • 09 sizes of central hole available for cutting different thickness of metal
  • 30 degree 03 seat cone
  • Can be used for hand cutting or Machine cutting

Specifications

NOZZLE SIZE   THICKNESS TO
BE CUT
PRESSURE OF
OXYGEN
MM INCHES In MM In Kgf/cm2
0.79 1-32" 3-6 1.5
1.19 3-64" 6-19 3.0
1.59 1/16" 19-75 4.0
1.59 1/16" 75-100 5.0
1.98 5/64" 100-150 6.0
2.38 3/32" 15-200 7.5
2.87 7/64" 200-250 8.0
3.17 1/8" 250-300 8.0

 



View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Rahul Murarka (Taknik Vyapar Private Limited)
  • 26, Netaji Subhash Road, Kolkata, West Bengal - 700001, India
  • Share us via
  • Call 08068659130 Ext. 966
Flashback Arrester Manufacturer from Kolkata, West Bengal
Post Buy Requirement
Taknik Vyapar Private Limited
Kolkata, West Bengal, India
gstGST : 19AAECT8778R1Z0 Verified Add Review

Other Products / Services

Welding Cable

  • Material Copper
  • Thickness 1.5-2mm
  • Certification CE Certified
  • Voltage 220V
  • Power 1-3kw
  • Feature Crack Free, Durable, Water Proof
View Complete Details

CO2 Regulator Pre Heater

  • Material Brass, Plastic
  • Certification ISI Certified
  • Application Gas Use
  • Voltage 220 V and 110 V AC single phase
  • Power 70 Watts
  • Connection 5/8” BSP RH

Details :

  • Easy installation between CO2 cylinder and regulator
  • Efficiently radiates heat to the gas stream
  • Lower power consumption with quick warming
  • Solid brass rod fittings for inlet and outlet connections
View Complete Details

Brass Cable Connector

  • Material Brass
  • Certification CE Certified
  • Color Black
  • Power 1-3kw
  • Feature Crack Free, Durable, High Ductility
  • Surface Polished
View Complete Details

Manual Gas Cutting Blow Pipe

  • Type Manual
  • Material Metal
  • Application Industrial Use
  • Color Golden, Black
  • Feature Fine Finished, Light Weight, Rustproof
  • Finishing Polished

Manual cutting blow pipe, is a well balanced injector type or nozzle mixing type, capable of cutting mild steel up to a thickness of 300mm. It can be used either dissolved acetylene in cylinder or with low pressure generated Acetylene. With a suitable nozzle, it can be used with LPG also. Its special designed body and head are of forged brass, eliminating casting porosity, ensuring total safety and backfire.

Details :

  • Forged Brass Body with Multi Fuel Gas Operation.
  • Cutting Range : 3.00 Mm to 300 Mm (mild Steel).
  • Accurate Flowrate Provides Excellent Cutting Quality.
  • Optium Gas Consumption.
  • Flame Setting By Operation Easily.
  • Light Weight, Confortable Working for Long Durations.
  • Inlet Connections : 3/8” Bsp (rh) for Oxygen & 3/8” Bsp (lh) for Fuel Gas.
  • IS : 7653 : 1975 Approved.
View Complete Details

Welding Holder

  • Type Portable
  • Certification ISI Certified
  • Application Electrode Use
  • Color Black
  • Finishing Polished
  • Feature Accuracy Durable, Corrosion Resistance, High Quality

Suitable for adverse welding conditions like shipbuilding or welding in enclosed conditions like vessels, etc. Available in 02 (Two) ranges of rated current i.e. 400 amps and 600 amps. It is designed for safe and comfortable welding, provides easy and effective connections of cable to holder. Its jaws are mode of non – ferrous metal alloy, provide longer service life.

Safety Features and Product Improvement of Fully / Semi Insulated Electrode Holder

  • Insulation resistance test shall be measured using a DC voltage of 500 volts
  • High voltage test shall be measured using 1000 volts and 2000 volts
  • Temperature rise test shall be carried out for 02 hrs as per IS:2641:1989, clause 3, 5
  • Test for flammability and resistance to heat shall be carries out as per IS:2641:1989 clause 3, 5, 7
  • Impact test by vertical fall and lateral test shall be carried out as per IS:2641:1989 clause 3, 5, 6

COPPER CONDUCTOR

HOFR/TRS HOFR TRS HOFR/TRS HOFR/TRS HOFR AT
90 DEG. C
TRS AT 90
DEG. C
25 228 161 2.0 0.780 0.997 0.903
35 285 201 2.0 0.554 0.708 0.641
50 360 25 2.2 0.386 0.492 0.446
70 454 320 2.4 0.272 0.347 0.314
95 547 386 2.6 0.206 0.263 0.239

 



View Complete Details

CNC Machining Services

Taknik Vyapar Private Limited is an expert in CNC machining services in West Bengal and known for highly accurate, finest, fully functioning or master patterns. Whether you want custom CNC prototype or precision machined parts, we provide you with the right CNC machining options for all kinds of machines with on-demand manufacturing and quick delivery. Choosing our services have several benefits which include :

  • Improve machining accuracy.
  • Creates flexibility in the manufacturing process.
  • It also increases safety.
  • Reduces set-up change over time.
  • Boosts the production volume.

 

We provide our customers with the best services at an affordable price. To know more about our machining services, contact us. We provide our customers with the necessary details before and believe in transparent business policies.

View Complete Details

Portable Gas Cutting Machine

Portable cutting machines are suitable for cutting ferrous metal sheets and plates in straight direction with oxy – fuel gas. The machine is moved on an aluminium track specially designed for this purpose. You can adjust the speed of the machine according to the thickness of the cutting metals by speed controller knob. The machine can be moved in the forward and reverse direction with the help of switch.

Features :

  • Pressed steel body with ventilation holes reduces overheating of parts
  • Light and easily portable with simple control
  • Circle cutting can be done with an attachment
  • Dynamically balanced armature for smooth drive
  • Smooth and precise horizontal & vertical adjustment of cutter
  • Asbestos heat shield protects the motor from heat during cutting
  • Precise control at low & high speeds
  • Hose connection : ¼” BSP RH for O2 & ¼” BSP LH for Fuel gas
  • Input voltage : 23 volts single phase 50 Hz

Specifications

PRODUCT CODE CUTTER TYPE CUTTING RANGE
PCM075 INJECTOR MIXING, 02-SEAT NOZZLE 03MM TO 75MM
PCM100 NOZZLE MIXING, 03-SEAT NOZZLE 03MM TO 100MM
PCM150 NOZZLE MIXING, 03-SEAT NOZZLE 03MM TO 150MM
PROFILE PROFILE CUTTING MACHINE 03MM TO 100MM

 

View Complete Details

Inverter Type Welding Machine

Features :

  • Compact Size & Light Weight.
  • High Quality & Power Saving Design.
  • Hot Start Function.
  • Stable & Reliable Multi – Function.
  • Automatic Voltage Reduction Coupled with An Anti – Stick Function.

Specifications

  ARC 200 ARC 250 ARC 400 ARC/TI G 200 ARC/TI G 400 MI G 250 MI G 400
IGBT/MOSFET MOSFET MOSFET MOSFET MOSFET MOSFET MOSFET MOSFET
PHASE 1 3 3 1 3 3 3
INPUT VOLTAGE (V
±15%)
AC 230 AC 415 AC 415 AC 230 AC 415 AC 415 AC 415
FREQUENCY
(Hz)
50/60 50/60 50/60 50/60 50/60 50/60 50/60
INPUT POWER
CAPACITY
(KVA)
06.00 09.40 18.20 06.00 /
06.00
13.10 /
18.20
08.50 14.00
OUTPUT CURRENT
RANGE (A)
10 – 200 20 – 250 30 – 400 07 – 200 07 – 400 50 – 250 50 – 400
POWER
FACTOR
0.73 0.93 0.93 0.73 0.93 0.73 0.93
NET WEIGHT
(Kg.)
8 17.50 26.50 9 28 9 36
DIMENSION
(INCH)
15.5*6*1
1.5
20*8*13 22.5*12*
20
15.5*6*1
2
22.5*17*
16
15.5*6*1
2
21.5*11*
21.5
DIAMETER OF
ROD/WIRE
2.50 –
3.15
2.50 –
4.00
2.50 –
5.00
2.50 –
3.15
2.50 –
5.00
0.6 – 0.8 0.8 – 1.2
WIRE FEEDER
SPEED
(M/MIN.)
- - - - - 2.5 – 18 3.0 – 24

 

























View Complete Details

Electrode Drying Oven

TAKNIK cabinet type drying oven ensures longer life of electrode at store, specially for re – drying the electrode having excess moisture than the consistent capacity of the flux of electrode. It is designed as a cabinet type store containing five self trays of weight 25/50 kgs of electrode (approx.). It has front opening door with lock facility. Normally, any special / low hydrogen electrode should be re – dried for one hour as 150 deg. C to 250 deg. C before use to exit excess moisture contained in the quoted flux.

TAKNIK portable carrying oven is a unit suitable for re - drying the M.S. Electrode at shop floor beside the use area. It can be used for 30 – 40 pcs electrode at a time with 230 volts single phase.

Specifications

SPECIFICATION CABINET OVEN PORTABLE OVEN
AC CURRENT
PORTABLE OVEN
DC CURRENT
Input Supply 230 V AC Single
phase 50Hz ± 10%
230 V AC Single
phase 50Hz ± 10%
24 V DC Single
phase 50Hz ± 10%
Input Current 8.5 A (approx.) 0.5 A (approx.) 15 A (approx.)
Input Power 1800 Watts 100 Watts 400 Watts
Temperature Range 50 deg. C – 250
deg. C
100 deg. C (max) 100 deg. C (max)
Type of Control Thermostatic - -
Number of trays 5 - -
Storage space 300 * 480 mm
(approx)
62 * 480 mm
(Approx)
62 * 480 mm
(Approx)
Dimensions 450*600*630 mm
(approx)
125*510 mm
(approx)
125*510 mm
(approx)

 













View Complete Details

Argon Flowmeter

  • Material Metal & Plastic
  • Shape Round
  • Argon 2.5 CGA 580 9/16”
  • Carbon Dioxide 2.5 CGA 320 9/16”
  • Size Standard
  • Waranty 1 Year

Provided for accurate measurement of gas flow in welding, laboratory applications

  • Machined brass body
  • Polycarbonate flow tube and outlet cover are impact resistant for maximum durability
  • Compact light weight construction
  • Designed for MIG & TIG applications and provide accurate regulator of gas flow
  • Dual scale gauge with unbreakable polycarbonate lens for durability
  • 10 feet 3m hose for use with Argon / CO2 shielding gases for option
View Complete Details

Welding Goggles

  • Type Fancy
  • Shape Oval, Round
  • Certification ANSI Certified
  • Color Black
  • Feature Anti Fog, Durable, Heat Resistance
  • Application Eye Protection
View Complete Details

Manual Gas Heating & Welding Blow Pipe

  • Type Manual
  • Material Metal, PVC
  • Shape Round
  • Certification ISI Certified
  • Color Metallic
  • Surface Finishing Coated

Welding Blow Pipe
Suitable for Medium and Heavy Gas Welding applications. An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips nozzles suitable for welding mild steel in the range of 1.00mm to 12.00mm thickness. The blowpipe is supplied complete with hose connections, spanner, operating data card and 06 nos.

Shower Type Heating Torch

  • Shower type heating torch 01 mtr. long to be used with Oxy fuel gas for heavy duty heating purpose in work shower.
  • Additional tips technical duties nozzle may be supplied on demand.
  • Both the body and legs are forged from extruded brass rod to remove any chances of casting porosity.
  • The special injector type design ensures continuous and trouble free service.
  • The low pressure welding blowpipe can be used for Welding in shop floors, automobile repair workshops and other general applications.
  • The blowpipe can be used with either LPG or Acetylene as the fuel gas.
View Complete Details

TPR Welding Hose Pipe

  • Material Thermoplastic Rubber
  • Color Blue for Oxygen & other Non – fuel gas Red for Fuel gases.
  • Pressure High
  • Thickness 5-10mm
  • Feature Durable, Easy To Use, Scratch Proof
  • Temperature -40 Deg. F to 160 Deg. F

Specifications

NOMINAL BORE IN MM TOLERANCE ON NOMINAL BORE IN MM MINIMUM THICKNESS OF TUBE IN MM MINIMUM
THICK
NESS
OF
COVER
IN MM
WORKING
PRESS
URE
KGF/C
M2
TESTING
PRESS
URE
KGF/C
M2
06.0 ± 0.75 1.50 1.00 12.5 25
08.0 0.75 1.50 1.00 12.5 25
10.00 0.75 1.50 1.00 12.5 25

 














View Complete Details

Argon & TIG Welding Rod

  • Material Aluminium, Brass
  • Shape Round
  • Thickness 3.5-4mm
  • Certification ISI Certified
  • Application Welding Purpose
  • Color Black, Grey

TIG Rods and Tungsten
In TIG welding, there’s a lot going on. You have a shielding gas, usually argon, running through the torch. You have an electrode that’s made of tungsten, which is an extremely hard steel that stands up to high heat. But depending on the weld metal, the electrode needs a special alloy ingredient added so it can provide a stable arc and uncontaminated weld.

Finally, you’ll often be welding with filler rod in your other hand. That makes three consumables that get used up and replaced periodically.

Tungsten Electrodes
Technically, the tungsten used in welding is not viewed as a consumable, since it’s not meant to serve as filler rod. A seasoned welder can make a tungsten electrode last a long time. A newbie, on the either hand, may go through one seven-inch tungsten every week. The electrodes are packed in various quantities (10 packs are the most popular). They come in seven or three inch lengths, which correspond to the two standard tips are available with TIG torches. The electrodes come in a range of diameters similar to stick welding.

View Complete Details

Welding Hand Helmet

  • Size Standard
  • Material Fiber, Plastic
  • Shape Rectangle
  • Style Full Face
  • Color Black
  • Pattern Plain
  • Feature Fine Finishing, Heat Resistant, Light Weight
  • Certifications ISI Certified
View Complete Details

Flashback Arrester

  • Type Flashback
  • Material Brass
  • Shape Round
  • Color Golden
  • Size Standard
  • Surface Polished

The safety “Flash back arrestor” is exclusively designed to eliminate every possibility of explosion or fire caused by flashback due to any reason. The flashback arrestor is useful for fitting on Gas Regulator & Welding / Heating / Cutting blowpipe. This safety device cuts off the gas flow in case of back fire.

It provides device to easy flow of gas during normal operation of Welding / Cutting but seize fire as soon as fire reach to the fire arresting device provided there in. Beside it Non return valve is also provided which locks the gas pressure if any adverse / excess flow pressure occurs in device due to any reason. Non return valve becomes normal as soon as flow come in its normal operation.

Featrues :

  • Heavy duty brass rod shell construction
  • Dry type flashback arrestor
  • A spring loaded non – return valve prevents slow or sudden back flow of gas
  • Flame trap to cool the flame front
  • Simple and trouble free installation
  • Available for cutter end (oxygen & fuel gas) and regulator end (oxygen & fuel gas)


Two types of safety valve

  • Non – return valve – Without sintered filter
  • Flash back arrestor – With sintered filter
View Complete Details

Welding Head Helmet

200 - 600 /pc Get Latest Price
  • Size Standard
  • Material Fiber, Plastic
  • Shape Rectangle
  • Style Full Face
  • Color Black
  • Feature Fine Finishing, Light Weight, Safe In Use
  • Pattern Plain
  • Certifications ISI Certified
View Complete Details

Manual Blow Pipe Cutting Nozzle

Solid Telurium Copper Swaged Cutting Nozzle for Head Mixing and Pre – Mixing System for Acetylene

  • Mixing principal, Oxy/Acetylene gases
  • Preheat cones are close together to promote better economy of gases
  • Preheat holes are available 6, 8&9 depends upon the thickness of metal to be cut
  • Cutting capacity 1/8” to 12” thick
  • 09 sizes of central hole available for cutting different thickness of metal
  • 45 degree 02 seat cone
  • Can be used for hand cutting or Machine cutting


Two Piece Nozzle for Natural Gas / Propane

  • Mixing principal, Oxy/Natural gas or Propane
  • Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases
  • 02 seat, 45 degree cone
  • 09 sizes of central holes are available.
  • Cutting capacity 1/8” to 12” thick
  • Can be used for hand cutting and Machine cutting
  • Pre-heat slots are available 12, 15&20 slots according to thickness of metal to be cut
  • Do not use Acetylene


Two Piece Nozzle for Natural Gas / Propane

  • 03-seat cone 30 degree
  • Turbulence effect provided at Gas mixing chamber which help to achieve proper heat output
  • Mixing principal at nozzle
  • Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases.
  • 09 sizes of central holes are available
  • Cutting capacity 1/8” to 12” thick
  • Can be used for Hand cutting and Machine cutting
  • Pre-heat slots are available 12, 15&20 slots according to thickness of metals to be cut
  • Do not use Acetylene.


Solid Telurium Copper Swaged Cutting Nozzle

  • Mixing principal at Nozzle
  • Preheat cones are close together to promote better economy of gases
  • Preheat holes are available 6, 8&9 depends upon the thickness of metal to be cut
  • Cutting capacity 1/8” to 12” thick
  • 09 sizes of central hole available for cutting different thickness of metal
  • 30 degree 03 seat cone
  • Can be used for hand cutting or Machine cutting

Specifications

NOZZLE SIZE   THICKNESS TO
BE CUT
PRESSURE OF
OXYGEN
MM INCHES In MM In Kgf/cm2
0.79 1-32" 3-6 1.5
1.19 3-64" 6-19 3.0
1.59 1/16" 19-75 4.0
1.59 1/16" 75-100 5.0
1.98 5/64" 100-150 6.0
2.38 3/32" 15-200 7.5
2.87 7/64" 200-250 8.0
3.17 1/8" 250-300 8.0

 



View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Rahul Murarka (Taknik Vyapar Private Limited)
  • 26, Netaji Subhash Road, Kolkata, West Bengal - 700001, India
  • Share us via
  • Call 08068659130 Ext. 966