Target equipments

Eachanari, Coimbatore, Tamil Nadu

Round shape cooling tower are called as Bottle shape cooling towers and induced draft counter flow cooling towers.

Round shape cooling tower gives 100% cooling efficiencies its give good appearance flow rate from 5 M/Hr To 550 M/Hr gives differences in temperature 4C To30 C Availability of Capacities from 5 TR T0 600 TR.

The bottle shaped FRP cooling tower is utilized in several industries and has the following features.

• All the components have a modular and compact design
• The casing and the design has an exclusive circular design. Therefore no impact of the direction of prevailing wind is encountered.
• This FRP water cooling tower has a very efficient sprinkler head system that is rotative and is made of aluminum alloy
• Axial flow fans that are designed aerodynamically with adjustable pitch are used
• The bottle shaped FRP cooling tower helps conserve power
• Quiet operation is ensured
• The sump is given easy access with a galvanized mesh of hot dip. This is done to avoid entry to foreign objects into the water basin
• The possibility of corrosion and rust gets minimized due to the framework steel components that are galvanized hot dip

Though the cooling tower maintenance is not difficult, it is important.

• Efficient treatment of water
• Prevent scale deposits
• Do way with or clean spray nozzles that get clogged
• Adequate air flow should be ensured
• Adequate performance of pump also should be assured

• PVC Fill : A good quality fill and is of long life too.
• Drift Eliminator: The carry over losses due to moisture drops.
• Sprinkler: Due to the even water distribution over the honey comb fills.
• Fan: flow type fan that is aero dynamically designed is of well balanced construction. we have availability of FRP fan and Aluminum fan

The square cooling tower is of the design: vertical induced draft counter flow, with a uniform distribution of water and an optimal transfer of heat .These are utilized by all large industries in order to cool the water that has undergone recycling. The installation of can be done independent of the direction of wind. Cooling Towers are nothing but heat rejection devices that are used to remove unwanted heat into the air from the cooling stream of water to a reduced temperature

Square cooling tower gives 100% cooling efficiencies its give good appearance flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4C To30 C Availability of Capacities from 5 TR T0 600 TR in single cell

• The flow of water ranges between 5 M³/Hr To 550 M³/Hr
• The design easily blends with the architectural environs
• The casing of the is of tough Fiber Glass Reinforced Plastic (FRP).It possesses sufficient structural power to endure winds of high velocities as well as vibrations. Besides gel coat, an ultra violet stabilized resin is also used for extended life. The square cooling tower is resistant against local impacts and local repairs could be easily done in case of occurrence of slight damages.
• A temperature difference from 4C To30 C can be ensured
• It uses less energy on the whole due to minimal resistance of air to water
• Nozzles are designed easy cleaning while running the square shape cooling towers

• In cold rooms and air condition plants
• Aluminum die casting
• Dairy industry
• Chemical industries
• In food industries such as hotels as well as in industries of food processing
• Oil refineries
• Automobile industries
• Forging and Mechanical industries
• Plants manufacturing glass
• Also employed for mega watt project industries' heat process
• By plastic molding machineries

dry cooling towers are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, we are the professional dry cooling tower and air cooled condenser manufacturers, tubes in copper and fins are aluminium moc we use 5/8 or 3/8 od copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

• a great deal of water gets preserved on using dry cooling towers.
• less or no preparation needed as atmospheric air is in abundance
• no formation of scale or heat exchanger cleaning is required
• there are no mobile parts except for the fan and the motors. Hence the cooling tower maintenance is negligible.
• dust, fly ash, living organisms or dirt do not get mixed up with process water
• there are no constraints placed on the location of plant
• no corrosions caused by air
• this cooling tower performance ensures minimal environmental impact
• reduced annual operating expenses

predominantly used for air compressor and power generating units for applications of engine water cooling. Petroleum plant, power utility, steel manufacturing industry, cement, sugar factures , chemical and gas-processing industrials.

We are looked upon as one of the eminent Industrial Dry Cooling Towers Manufacturers in India. The Dry Cooling Towers, offered by us, are available in capacities ranging from 100 kw to 1500 kw and thousands of kilo watts could also be attained by multiplexing them. Additionally, the Natural Draft Dry Cooling Towers consumes less water and ensures high productivity and are also easy to operate & maintain.

We are renowned as one of the major Industrial Cross Flow Cooling Towers Suppliers in India. Though the Cross Flow Cooling Towers are highly spacious and includes rotary sprinklers or tiny nozzles, the towers are easy to operate and maintain. The below mentioned salient features have made the FRP Cross Flow Cooling Towers ideal for various industrial applications.

Salient Features :

• Low Power consumption
Durability
• High Performance.

The rectangular cooling tower or the closed type cooling tower or the cross flow cooling tower has a range of cooling capacity of a single cell cooling tower of around 70M³/Hr to 300 M³/Hr. The suitable refrigeration is between 120 and 440. Multiple cells may be fixed together. This installation plants are available when your cooling requirements exceed The motors in this cooling tower system are present outside the tower. This setup is devoid of the problem of hot mist. When compared to the section of motor inside fan, it is very easy to remove and thus repair.

Frame: The supporting structures are of hot-dip galvanized steel, used to reduce corrosion or rusting, thus ensuring extended life.

Water flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4°C To 30°C Availability of Capacities from 5 TR T0 600 TR.

The casing of this industrial cooling tower is made of FRP (Fiberglass Reinforced Polyester).It is of light weight, simple to assemble and there is no need to paint. This reduces the cost of the cooling tower maintenance.

• Lower maintenance and longer service life.
• Available with PVC fills or treated wood fills,
• In virtually unlimited capacity
• The furnishing of the inspection doors of the tower are done in such a way to provide easy access to the inside for maintenance, inspection, float valve adjustment, sump flushing out and lift-out strainer cleaning.
• FRP fan specially designed for higher efficiency.

We are listed at the apex in the list of the prime Bottle Shaped Cooling Towers Exporters from India. The unique shape of the Bottle Cooling Towers ensures 100% cooling and also provides difference in temperature that varies from 4C to 20C. The Round Bottle Cooling Towers are ideally designed for application in different industry for cooling application and also for re-cycling the water flow from 5 M/ Hr. to 500 M / Hr. Moreover, the rotary sprinkler also helps in uniform flow of water over the wet deck fills and ensure maximum cooling efficiency.