Target equipment Inter-cooler and after cooler Heat exchangers are utilized in several industries, especially in chemical plants and oil refineries, textile industries. The purpose of these heat exchangers is to transfer heat from machinery to the other, most often from a liquid to the other. The constant efficiency of the heat exchanger demands for regular inspection to assess the equipment integrity An inter cooler, also known as the charge air cooler is heat exchange device of the air to air or air to liquid kind that is used on supercharged and turbocharged internal combustion engines in order to maximize its volumetric efficiency by raising the charge density of intake air via almost isobaric.

The inter-coolers, sometimes called as the after coolers, come in varied shape, design and size based on the special requirements and performance of the supercharger system . Some of the usual spatial designs are

• TMIC (Top Mounted Inter Coolers)


• HMIC (Hybrid Mounted Inter-coolers)


• FMIC(Front Mounted Inter coolers).

Each of these kinds could be cooled with an air to liquid system, air to air system , or its combination.

Our inter-cooler heat exchanger to successfully cool the air passing through the device, The inter-cooler needs to be cooled with the aid of some outside means.

Many of the inter-coolers undergo cooling like an engine radiator where the air flows above the inter-cooler fins outside, that in return cools the air present inside the inter-cooler. Thus it is known as air to air inter-coolers. Some of the inter-coolers that are water cooled rather than by air are known as air to water inter-coolers or after coolers.

• The advantage that target equipments after cooler heat exchanger is that the air passing through the device can be cooled better when compared to a traditional inter-cooler where ice and excessively cold water is utilized to cool the device.


• Water is a good conductor of heat rather than air; with the capacity to conduct four times its heat. It is for this reason that the after coolers are comparatively more effective. The downside is that as time goes, the water gets heated to the air temperature passing through the device and so loses its capacity to cool the incoming air.


• Some of the after coolers utilize a small radiator in order to cool the water running through the system, thus making the heat exchangers ideal for racing as well as street use.


• After cooler heat exchangers that are ice packed work well for applications of drag racing as only around ten seconds of functioning is required before one shuts down and goes to the victory dais.


• For street applications and mild racing, after coolers or air to air inter-coolers with radiators are feasible since the ability to cool the incoming air does not minimize with time.

Target Equipments design of the shell and tube heat exchanger is quite complex. The tubes used internally are deliberately of various shapes and design to obtain different outcomes. While a few of the tubes may be plain, others may come finned longitudinally or horizontally. Additionally, the tubes can also be of various materials and thermal conductivity. For instance, Target equipments can be designed from carbon steel, stainless steel, cupronickel, copper or brass.

Owing to the complex nature of the shell and tube heat exchangers, regular inspection of the equipment is necessary. This can help to assess the thickness of the tube walls that are prone to pitting, erosion and corrosion over time. The status of the whole bundle of tubes may be charted and assessed through a thorough inspection with the help of a device known as Internal Rotary Inspection System that functions via ultra tonic testing and also has a non-destructive nature

• Materials we used for Shell :, Copper, Carbon steel, stainless Steel sizes up to 20000 mm,


• Tubes Copper, Brass, Cupro-nickel , Carbon Steels in sizes from 6 mm to 50 mm OD, Stainless Steels,


• Tube Sheets: Carbon Steel, Stainless Steel, Brass etc.


• Channels and Cover : Carbon Steel, Stainless Steel, Case Iron, Brass etc.


• Gaskets : Rubber, Compressed

• Chemical, Petrochemical,


• Fertiliser. Thermal Power plants,


• Refrigeration Plants,


• marine Engines,


• Turbines, Hydraulic Systems,


• Sugar Machinery .

Oil cooler are classified in to two. One is air cooled - oil cooler then water cooled oil cooler. Air cooled oil coolers are mostly used where water availability is scarce and expensive. Water-cooled oil cooler, maintenance and operating cost are usually low. The cooled water manifolds, charges oil and air coolers for usage on marine engines. These heat exchangers are suitable for power steering, bow thrusters , deck machinery etc.

Oil Coolers are used for various applications involving cooling of Oils,

• Industrial Oil Coolers heat exchangers are widely used in refrigeration,


• power plants,


• air conditioning,


• processing of natural gas,


• chemical plants,


• petroleum refineries and petrochemical plants.


• Plastic Machinery


• Hydraulic Power Packs


• Marine oil cooler

We are recognized as one of the foremost Industrial Tube Bundle Heat Exchanger Manufacturers, based in India. Using quality raw materials, we have developed our Tube Bundle Heat Exchanger that finds uses in various industrial applications. It is available in various grades and specifications. High tensile strength, long functional life, consistent performance, and anti-corrosive properties are some of the significant features of our Tube Bundle Heat Exchanger. Consequently, our Double Tube Bundle Heat Exchanger is high on demand in national as well as international markets.

We are recognized in the global market as one of the most prominent Intercooler Manufacturers & Exporters, based in India. It can work upon the inlet temperature at 120c and yields outlet temperature as 42 c. Our Intercooler Heat Exchangers are highly efficient for various industrial purposes. Moreover, we offer customized designs of Industrial Intercooler according to the need of the clients.

We offer an exclusive series of Shell & Tube Heat Exchangers that are efficient to handle high pressure and temperature applications. These types of Exchangers find uses in various industrial applications. High capacity and tensile strength is the effective features of our Shell Tube Heat Exchanger. These Heat Exchangers are available in various grades and designs. Moreover, we can offer customized designs of Industrial tube Heat Exchanger. Consequently, we are well-reckoned in the market as one of the most prominent Shell Tube Heat Exchanger Manufacturers in the country. We offer these Heat Exchanger at most discounted prices. Accordingly, we are recognized as one of the most prominent Industrial tube Heat Exchanger Suppliers, based in India.

Marine heat exchangers are the most common way to cool a boat's engine, using the lake, river or ocean water in which the boat floats. Since this water may be corrosive, the engine may be cooled by a sealed mixture of distilled water and antifreeze. Heat from the water–antifreeze mixture is then transferred to the ocean (or lake or river) water which flows into a heat exchanger. To protect the marine heat exchanger from corrosive salts, a sacrificial zinc anode is screwed into the heat exchanger. This anode must be periodically replaced as part of regular maintenance. Because the water the boat floats in may be contaminated with floating particles such as wood or other detritus most boats will have a filter (often stainless steel mesh) to remove these particles before they flow through the heat exchanger. This filter must be periodically cleaned or else the flow of water to the heat exchanger will become obstructed and the engine will overheat.

We are counted among the most prominent Plate-Type Heat Exchanger Exporters from Tamil Nadu. Our Plate Heat Exchanger comprises of various corrugated metal plates with holes between the two fluids through which transfer of heat can take place. Herein, the sizes and number of the plates are determined by the physical properties of the fluids, flow rate, temperature program, and pressure drop. With efficient manufacturing capabilities, we are able to offer customized designs of Industrial Plate Heat Exchanger as per the need of the client.