Our Product / Services
We are leaders in the market for providing best range of Jumbo Process Scanner, Mp Based Multifunction Timer, Online CO2 Transmitter, Temperature Controller with Timer and Portable Hygro Thermometer and Logger
Accept input RTD, Thermocouple, Voltage, Current Process Temperature, Pressure, Humidity, Level Flow, Co2, Air velocity, Diff pressure etc
Resolution Available :0.001/0.01/0.1/1
Display Range :-999 to 9999 counts
Wall mounting, Power supply :230 VAC
CMRI Group :I, IIA&IIB Certified Flame Proof Enclosure
Retransmission out put :4 -20mA optional
TUTTC Series Input RTD, Thermocouple(J/K) selectable, RTD/ -50.0 to 400.0 C, J/ 0-600 C, K/ 0-1250 C, Control mode on/off and Time proportional, Hysteresis, Time, Proportional , Offset Selectable , Dual Display ( PV/Time) with Dual Relay Output, Control set Point can be set feather touch keys, Power supply 230 VAC mains operated
Power supply :230 VAC mains operated
Control mode :Heat/Cool/High& Low Alarm
Accept input RTD, Thermocouple, Voltage , Current Process Temperature , Pressure, Humidity , Level Flow, Co2, Air velocity, Diff pressure etc Resolution Available 0.01/0.1/1 Display Range -999 to 9999 counts Wall mounting , Power supply : 230 VAC CMRI Group I, IIA&IIB Certified Flame Proof Enclosure Retransmission out put 4 -20mA optional Control Relay output , Optional Dual Display(PV/SV)
Accept input RTDs, Thermocouples, Voltage , Current Process Temperature , Pressure, Humidity , Level Flow, Co2, Air velocity, Diff pressure etc 1000 Readings Per channel , Memory with RTC Display Range -1999 to 9999 counts Real time, Print time , Offset , Input , Range selectable Input through Data logger / Paperless Recorder Communication RS232, RS485, USB Display Sizes available 2 , 4 and 6
Measures relative humidity, temperature and dew/frost point Range of application ; -1060C with 0 100%rh Freely selectable logging interval, 5 s1 h 20000 data point memory with date & time stamps Psychro metric calculations of dew and frost point values available FDA 21 CFR Part 11 / GAMP 4 compliant Adjusted at 23C and 10, 35, 80%rh Interface (UART) , USB for connection to PC Highest accuracy at 0.8 %rh and 0.2 C, Long Life Battery
CO2 sensor by means of convection via the measuring head and a 12 mm pipe operates according to the infrared principle (NDIR) ensure high reliability and excellent measurement accuracy there is no soiling of the optical measurement path in the CO2 sensor The CO2 sensor is carried out by diffusion via a diaphragm mounting concept stands for easy installation and replacement within seconds The measuring ranges 0.2000 / 5000 / 10000ppm are mapped to the 0.5 V / 10 V or 4.20 mA analog output Operating Temperature -20 60 C , AC/DC operated
aSENSE is an advanced transmitter for installation in the climate zone. It measures both CO2 concentration and temperature. The data is transmitted to a BMS system or controller and can be configured with UIP Software. Detected values are transformed into two analogue output signals that can be transmitted to a system master or DDC. aSENSE is available both with and without LCD display for FIXED installation in the climate zone as well Measure CO2 02000ppm and Temperature 050 C Output CO2 /Temp : 0 10VDC/420mA, supply : 24VDC/AC
U5100 series pressure transducers from the UltraStable line of MEAS over voltage protected to 16Vdc in both positive and reverse polarity 100% 316L media isolation covers , solid piece of 17-4PH withstands more than 10 million pressure cycles without failure Heavy Industrial - High EMI Rated , Extended temperature range -40 to 125 C Operating Temperature, Accuracy: 0.1% FS BFSL Ranges : -1 Bar to 250 Bar , Universal Supply 9-30VDC Output :1-5VDC, 0-10 VDC (3Wire), 4-20mA ( 2 wire) Process connection : inch BSPM, gage and absolute
Power on, Pulse start , Proximity/Photo sensor Range 0.1 sec to 9999 min selectable On Delay / Off Delay selectable Pulse/Gate trigger logic selectable Up/Down count selectable , Out LED Available Front and external Reset 10 years run time memory backup Relay out put with 230 VAC mains operated Size available 72X72, 96X96 mm Also have weekly/Daily Timer with RTC ( 00.00 to 23.59 HH:MM)
Power input: 100240VAC, 50/60Hz or DC24V Range of input voltage: 85%110%, rated voltage or DC21.6V26.4V Power consumption: less than 10VA or 5W External power supply: 12VDC 10%; 100mA Display: Double-line 6-digit LCD display NPN input: ON impedance 1K ohm max. ON residual voltage: 2V max. PNP input: high level: 4.530VDC; low level: 02VDC Dielectric strength: 2, 000VAC; 50/60Hz for 1 minute international dimension and CE, UL international safety approvals