Write a Review
Our Product / Services
We are leaders in the market for providing best range of Flow Controller with Totalizer, Programmable Controller, Digital Multi Point Process Indicator, Jumbo Process Indicator and Universal Process Indicator
low Input :
Linear Voltage (0-5V DC OR 1-5V DC, Linear Current (4-20mA), Two Wire Transmitter Input (All Linear inputs can be configured with or without Square Root Extraction) OR Frequency Input
Temperature Input :
RTD PT-100 OR Thermocouple (K, E, J) For Temperature Compensation (Compensation possible with TUPC-FC)
Pressure Input:
Linear Voltage (0-5V DC OR 1-5V DC, Linear Current (4-20mA) For Pressure Compensation (Compensation possible with TUPC-FC)
Display:
Flow Rate, Accumulated or Total Flow, Pressure & Temperature
Accuracy:
0.2%FS
Output for Batch Control:Relay
Set Point: Set point Range Limit;Dual Set Point Switch; Remote Set point
Alarm:High & Low Alarms for Flow, Temperature and Pressure
Communication:RS485 (Plug-in Module)
Re Transmission O/P:Linear Current or Voltage (SV OR PV)
Power Supply:SMPS100240VAC/DC50Hz OR 24 V DC, Size : 96X96X100mm
Input: :accept Thermocouples (B, E, J, K, L, N, R, S, T, U, T), RTD (PT100), Analog current (0 20mA, 4 20mA) and linear voltage (0 5V, 0 10V) Accurate PID parameter auto-tuning and Programmable
output :Relay/Voltage/ Current , Panel sizes: 48X48 , 96X96mm Dual Quality LED display and Celsius or Fahrenheit temperature display programmable control modes : 8 ptnX16/32/64Step ( Ramp/Soak) Optional RS-485 communication interface Modbus ASCII, RTU. Universal Power Operated : 100 to 240 VAC/ 50 Hz international dimension and CE, UL international safety approvals.
Accept input RTD, Thermocouple, Voltage, Current Process Temperature, Pressure, Humidity, Level Flow, Co2, Air velocity, Diff pressure etc
Resolution Available :0.001/0.01/0.1/1
Display Range :-999 to 9999 counts
Panel /Wall mounting, Power supply :230 VAC
Large display sizes :1, 2, 4, 6, 8
Manual selection :2/4/6/8/10/ 12 points available
Input :
Universal [All type of thermocouple and PT100 Cu50 (RTD) linear voltage linear current MV 2 wire transmitter input], AC current (0 5 amp.), AC voltage (0 500 volt), Alarm: High low second high and second low (Selectable)
Communication :
RS 485 RS 232 (Plug in type modules)
Re transmission O/P :
Linear current or voltage, Power supply: SMPS 100240VAC 50 Hz,
Accuracy :
0.3%FS 1 unit
Display resolution :
0.001 C (Selectable),
Other features :
Over range and sensor fail output off input offset, Operating ambient: Temp.: 10C60C humidity :
Accept input RTD, Thermocouple, Voltage, Current Process Temperature, Pressure, Humidity, Level Flow, Co2, Air velocity, Diff pressure etc
Resolution Available :0.001/0.01/0.1/1
Display Range :-999 to 9999 counts
Panel /Wall mounting, Power supply :230 VAC
Large display sizes :1, 2, 4, 6, 8
Manual selection :2/4/6/8/10/ 12 Zones available
Accept input Voltage :
4.20mA @ 24 VDC ( 2 Wire)
Process :
Temperature , Pressure, Humidity , Level Flow, Co2, Air velocity, Diff pressure etc
Resolution :
0.001/0.01/0.1/1 selectable
Display Range :
-1999 to 9999 Selectable 4 Digit LCD Display with selection Keys IP 65 weather Proof enclosure, Also available flame Proof enclosure with CMRI Group I, IIA&IIB Certified fire safety with chemical and oil industries , save cable
Input (Single or dual): Voltage(AC/DC) /Current(AC/DC) /Power( KW/W)
Transmission O/P (Dual/Single): Linear current (4 20 mA) or voltage (0-10VDC)
Power supply: 230VAC or 110VAC , 50 Hz
Re transmission accuracy: 0.2%FS 1 Digit
Customized Transducer as per your application
Size (W x H): 70 x 100 (DIN rail)
Other features: Input calibration ( zero/span)
Operating ambient: Temp.: 10C60C
humidity:
T.Ajitha (Tempsen Devices)
Plot No : 2&3, Balaji Nagar, 4th Street, Mettukuppam, Thoraipakkam, 600097 ., Chennai, Tamil Nadu - 600015, India
Share us via
