Industrial Valves in Thane

Stainless Steel (SS) Industrial Safety Relief Valve, Valve Size : 8 Inch

• Model : SRV-101
• Material : Stainless Steel (SS)
• Cap Type : Closed Type & Open Type.
• Blow down (Percent) : 2 TO 10
• Supply Type : Manufacturer
• Usage : Industrial
• Media : Water,Gas,Fuel,Steam,Chemicals,Air,Nitrogen,Etc.
• Pressure : High Pressure
• Valve Size : 8 inch

Stainless Steel Industrial Gate Valve, Pressure : High

• Available Material : WCB/CF8/CF8M
• Brand Name : Swami Valves And Engineers
• Material : Stainless Steel
• Condition : New
• Media : Gas
• Temperature Of Media : High Temperature
• Size : 1/2 inch-20 inch
• Number Of Flower : Industrial Gate Valves
• Supply Type : Manufacturer
• Pressure : 76 kg/cm2

Industrial Ball Valve, Thread Type : NPT, BSPT.

• Usage/Application : Industrial
• End Connection : Flange End, Screwed End.
• Color : Gray, Blue.
• Thread Type : NPT,BSPT.
• Brand Name : Swami Valves And Engineers
• Automation Grade : Manual
• Pressure : Low ,Medium ,High
• Operation : Hand Wheel, Gear, Motorized
• Tensile Strength : 200 - 400 Mpa
• Supply Type : Manufacturer

Pressure Regulating Valves, Pattern : Plain

• Country of Origin : India
• Supply Type : Manufacturer
• Pattern : Plain
• Material : Metal
• Certification : ISO 9001:2008 Certified

Metal Solenoid Assembly, For Industrial, Color : Grey, Silver

• Service Temperature : 70 Degree C
• Power : 65 Watts
• Lifting Power : 10 Kg
• Ampere : 0.36 Amp
• Class of Protection : IP 40
• Stroke Length : 18mm
• Supply Type : Manufacturer

Metal Butterfly Valve, For Water Fitting, Specialities : Non Breakable, Heat Resistance, Durable, Casting Approved

• Usage : Water Fitting
• Type : Industrial Valves
• Condition : New
• Corrosion Resistance : Yes
• Supply Type : Manufacturer
• Specialities : Non Breakable, Heat Resistance, Durable, Casting Approved

Cast Iron Boiler Pressure Control Valve, Color : Maroon Black

• Operating Pressure : 50 Bar
• Finishing : Color Coated
• Material : Cast Iron
• Country of Origin : India
• Valve Size : 4 Inch
• Media : Steam

Steam Line Cast Steel Safety Valve, Pressure : 10

• Supply Type : Manufacturer
• Power : Good
• Pressure : 10
• Country of Origin : India
• Valve Size : 2 Inch
• Material : Cast steels

14 Kg Steam Pressure Reducing Valve, Size : 40mm

• Pressure : 14 kg
• Power : Good
• Operating Pressure : Up to 10 Bar
• Automation Grade : Manual
• Material : CI Body
• Supply Type : Manufacturer
• Media : Steam
• Size : 40mm

Pressure Seal Buttweld Check Valve

• Seat : A105+13%CR, A105, +STEELITED 6#.
• Face to Face : ANSI B16.10
• End Conn. : ANSI B16.25
• Body & Bonnet Materials : WCB, WCC, WC6, WC9, C5, C 12, LCB, LCC, CF8, CF8M.
• Class : 600, 900, 1500, 2500
• Country of Origin : India
• Size Range : 2” to 24” Inch
• Design Std. : ASME B16.34
• Trim : API NO.1 TO 16

Pressure Seal Hand Operated Flanged Gate Valve

• Face to Face : ANSI B16.10
• Country of Origin : India
• End Conn. : ANSI B16.5
• Trim : API NO.1 TO 16
• Size Range : 2” to 24” Inch
• Class : 600, 900, 1500, 2500
• Seat : A105+13%CR,A105, +STEELITED 6#.
• Supply Type : Manufacturer
• Design Std. : ASME B16.34

Pressure Seal Hand Operated Buttweld Gate Valve

• Size Range : 2” to 24” Inch
• Trim : API NO.1 TO 16
• Body & Bonnet Materials : WCB, WCC, WC6, WC9, C5, C12, LCB, LCC, CF8, CF8M.
• End Conn. : ANSI B16.25
• Class : 900, 1500, 2500
• Seat : A105+13%CR, A105, +STEELITED 6#.
• Design Std. : ASME B16.34
• Supply Type : Manufacturer
• Country of Origin : India

Cast Iron Safety Valve, Color : Blue

• MOQ : 10 Piece
• Supply Type : Manufacturer
• Number Of Flower : Safety Valve
• Pressure Range : 5-100 Psi
• Material : Cast Iron
• Packaging Type : Box
• Application : Boilers, Compressed Air Systems, Pressure Vessels
• Sub Types : Spring Loaded, Lever Type
• Temperature Range : Up To 400°F

Stainless Steel Safety Valve, Color : Blue

• Application : Boilers, Compressed Air Systems, Pressure Vessels
• Material : Stainless Steel
• Number Of Flower : Safety Valve
• Sizes Available : 15mm To 300 mm
• Supply Type : Manufacturer

Cast Iron Butterfly Valve 50 To 1200 Mm, Packaging Type : Box

• Pressure Rating : Up To 150 Psi
• Sub Types : Wafer, Lug, Double Flanged, Penumatic, Electric Actuation
• Temperature Rating : Up To 250°F
• Size : 50 To 1200 mm
• Supply Type : Manufacturer
• Usage : Industrial. Plants, Fivac, Water Treatment
• Material : Cast Iron
• Number Of Flower : Butterfly Valve

Spirax Metal Water Pressure Reducing Valve

• MOQ : 2 Piece
• Pressure Range (PSI) : 50-100
• Brand Name : Spirax
• Valve Size : 1.5 Inch,2.0 Inch,3.0 Inch,4.0 Inch,5.0 Inch
• Supply Type : Manufacturer
• Number Of Way : 2way
• Media : Water
• Material : Metal,Carbon Steeel
• Automation Grade : Semi-Automatic

Pressure Reducing Valve For Industrial

• Country of Origin : India
• Media : Water, Air, Gas, Oil & Steam
• Supply Type : Manufacturer
• Application : Industrial
• Body : Brass, SS-304, SS-316
• Size Range : 1/2" to 4"
• Temperature : Upto 90C, Upto180C
• Max.Inlet Press : 18Kg/Cm, 40Kg/Cm
• Ends : Screwed / Flanged

4 Inch Cast Steel Gate Valve, Color : Grey For Industrial

• End Connection : Flanged
• Application : Industrial
• Supply Type : Manufacturer
• Country of Origin : India
• Material : Cast Steel
• Size : 4 Inch
• Certification : ISI Certified

Butterfly Valve, For Water Fitting, Color : Blue

• MOQ : 10 Pieces
• Valve Size : Available In Different Sizes
• Specialities : Investment Casting, Heat Resistance
• Corrosion Resistance : Yes
• Material : DI,CI, Forged Steel & bronze
• Usage : Water Fitting
• Type : Industrial Valves

Blue Coated Gate Valve, For Industrial, Specialities : Non Breakable, Durable

• Number Of Flower : Industrial Valves
• Country of Origin : India
• Application : Industrial
• Valve Size : Available In Different Sizes
• Corrosion Resistance : Yes
• Material : DI, CI, Firged Steel, & bronze
• Specialities : Non Breakable, Durable
• Finishing : Coated

OP 100 WELDED VALVE BLOCK NEW DESIGN

• Temperature Pressure : Low Temperature Pressure
• Overall Length : 20-30 Inch, 40-50 Inch
• Mounting Type : Vertical
• Actuation Type : Double Acting
• Specialities : Non Breakable, Heat Resistance
• Condition : New
• Finishing : Coated
• Supply Type : Manufacturer
• Usage : Gas Fitting

Automatic Polished Metal 1/2 "Expansion Engine Non Return Valve

• Supply Type : Manufacturer
• Automatic Grade : Automatic
• Material : Metal
• Finishing : Polished
• Number Of Flower : Non Return Valve

5/8 " Expansion Engine Non Return Valve

• Condition : New
• Number Of Flower : Non Return Valve
• Pressure : High Pressure
• Supply Type : Manufacturer
• Material : Metal
• Feature : Blow-Out-Proof, Durable
• Country of Origin : India
• Pattern : Plain
• Length : 0-100mm
• MOQ : 1

PTFE Butterfly Valves, Certification : ISO 9001:2008 Certified

• MOQ : 50 Piece
• Connection Type : Flanged & Threaded
• Feature : Durable
• Certification : ISO 9001:2008 Certified

CPVC Non Return ( Check ) Valve

• Supply Type : Manufacturer
• Material : CPVC
• Feature : Blow-Out-Proof, Crack Proof, Durable
• Certification : ISO 9001:2008 Certified
• Condition : New

Plain Black CPVC Foot Valve, Certification : ISO 9001:2008 Certified

• Pattern : Plain
• Supply Type : Manufacturer
• Country of Origin : India
• Certification : ISO 9001:2008 Certified

Industrial Valves For Water Fitting

• Usage : Water Fitting
• The company is dealing in a range of Industrial Products like Ball Valves, Butterfly Valves, Check Valves, Gate Valves, Plug Valves, Piston Valve, Pressure Reducing Valve, Safety Relief Valves, Steam Trap Valve, Audco Y Type Globe Valves, KSB Forged Valves, Cast Steel Gate Valve...

Stainless Steel DUAL PLATE CHECK VALVE

• Supply Type : Manufacturer
• Material : Stainless Steel
• With the constant support of our dexterous workforce, we are able to provide superior quality Dual Plate Check Valve. these are made available with dual plates that come rubber/metal seated, thus making these perfect to handle different types of...

ANGLE TYPE GLOBE VALVE

• Supply Type : Manufacturer
• We are one of the leading and eminent organization involved in manufacturing and supplying quality-approved Angle Type Globe Valve. These products are widely demanded and appreciated by our patrons due to their durability and performance. Our...

Pressure Seal Check Valve, Feature : Blow-Out-Proof, Casting Approved

• MOQ : 100 Piece
• Feature : Blow-Out-Proof, Casting Approved
• Pressure : High Pressure, Low Pressure, Medium Pressure
• Supply Type : Supplier
• Class : 150-2500
• MOC : WCB, LCB, WCC, WC6, WC9, CF8, CF8M, CI, CS, etc.

Metal Lever Operated Safety Valve, Size : ½-12 Inch (dn15-dn300)

• MOC : WCB, WC9, WCC, LCB, LCC, CF8, CF8M, etc.
• Country of Origin : India
• Supply Type : Supplier
• Size : ½-12 Inch (dn15-dn300)
• Material : Metal
• Number Of Flower : Lever Operated Valve

Cast Iron Sluice Valves

• Supply Type : Supplier
• Number Of Flower : Non Rising spindle or spindle
• Size : 2-20inch

DLP Valve (Direct Low Pressure)

• MOQ : 20 NO
• Valve Ball Size : 1/4
• Brand Name : Tech US
• Country of Origin : India
• Pressure : Low Pressure
• Pattern : Plain
• Material : Stianless Steel
• Certification : ISO 9001:2008 Certified
• Type : Low Pressure Ball Valve

Low Pressure Cast Iron Double Flange Sluice Valve

• Base Color : Black
• Valve Size : 2"-36"
• Body Material : Cast Iron
• Supply Type : Supplier
• Brand Name : Kirloskar
• Material : CI
• Usage/Application : Water

Y Strainer Valve

• Supply Type : Supplier
• We are the exporter and supplier of this products....

High Pressure Gate Valves

• Supply Type : Supplier
• We are the exporter and supplier of this products....

Carbon Steel Pressure Gauge Valve, End Type : Pipe Weld

• MOQ : 100 Piece
• Working Pressure : 250 bar
• Size : 10 mm
• Technique : Hot Rolled
• Valve Type : Block and Bleed Valve
• Pressure : 10Bar
• Surface Finish : Powder Coated
• Connection : 1/4 inch BSP
• Material : Carbon Steel
• End type : Pipe Weld

High Pressure Flanged Ball Valve, Finish Type : Polished

• Material : Stainless Steel (SS)
• Supply Type : Supplier
• Connector Type : Screwed
• Media : Water
• Number Of Holes : 3
• Finish Type : Polished
• Temperature Of Media : High Temperature

Stainless Steel Flow Control Valve

• Media : Water
• Surface Finishing : Polished
• Size : 1.5 inch
• Material : Stainless Steel
• Application : Industrial
• Supply Type : Supplier

Automatic Metal High Pressure Safety Valve, For Gas Fitting, Oil Fitting, Size : 1inch

• Country of Origin : India
• Number Of Way : 2way
• Pressure : High Pressure
• Type : High Pressure Valves
• Size : 1inch
• Application : Gas Fitting, Oil Fitting
• Automatic Grade : Automatic, Manual
• Material : Metal, Stainless Steel
• Feature : Anti Dust, Casting Approved

High Cast Iron PRV, For Gas Fitting, Oil Fitting, Size : 100-150mm

• Valve Type : Automatic, Manual
• Availability : 10-15kg
• Size : 100-150mm
• Application : Gas Fitting, Oil Fitting
• Material : Cast Iron, Metal, Staniless Steel
• Feature : Casting Approved, Corrosion Proof
• Country of Origin : India
• Pressure : High, Medium

Mild Steel Cast Iron Butterfly Valve, For Water Fitting

• Feature : Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Port Size : 0.1mm-5cm, 2cm-50cm
• Application : Water Fitting
• Certification : ISO 9001:2008 Certified
• Country of Origin : India
• Material : Mild Steel

F304 Forged Steel Gate Valve, Size : 15 Mm To 50 Mm

• Face to Face STD : Manufacturers Standard
• Design Mfg. STD : API 602, ISO 15761
• Pressure Class : 800, 1500, 2500
• Testing STD : API 598, BS EN 12266-1
• Operator : Hand Wheel
• End Connection : Butt Weld, Socket Weld, Screwed
• Size : 15 mm to 50 mm
• Material : A 105, F304, F304L, F316, F316L, F11,F22

Lined Butterfly Valve, Size : 15 Mm To 200 Mm

• Pressure Class : 125, 150, PN 10, PN 16
• Size : 15 mm to 200 mm
• Operator : Lever/Gear or Pneumatic/Electric Actuator
• Supply Type : Manufacturer
• End Connection : Flanged, Wafer, Lugged

Stainless Steel Solenoid Valve

• Pressure : Up to 10 Kg
• Country of Origin : All Standard Voltage Available
• Type : Direct Acting,Pilot Operated
• Material : Stainless Steel, Aluminum Die Cast, Brass
• Supply Type : Manufacturer

CAST CARBON STEEL AND STAINLESS STEEL ALLOY STEEL

• Size : 0-100mm, 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm
• Brand Name : Kirloskar, Zoloto
• Certification : ISI Certified, ISO 9001:2008 Certified
• End Connection : Butt Weld, Flanged, Screwed, Socket Weld Ends
• Material : Carbon Steeel, Carbon Steel, Cast Steel, Stainless Steel
• Condition : New, Used
• Pressure : High, Low, Medium
• Feature : Blow-Out-Proof, Casting Approved, Corrosion Proof, Durable, Good Quality, Investment Casting
• Application : Gas Fitting, Oil Fitting, Water Fitting

Industrial Gate Valves

• End Dimension : ANSI B 16.10/ DIN 3230
• Temperature range : 100°C to 800°C
• Designed for high pressure and high temperature applications, for a wide range of except slurries and viscous fluids. These valves are generally used in the wide open or closed position, are not recommended for throttling service because throttling...

KSB CAST

•   Our Organization is counted among the most authentic organization involved in offering Industrial Globe Valve to our esteemed patrons. The offered product are composed superior grade raw material and are sourced from the most trustworthy vendor...

PVC Pressure Relief Valve

• Material : PVC
• Rust Resistance : Yes
• Media : Water
• Weight (kg) : 1 to 3 kg

PRIMECH High Stainless Steel Relief Valves

• Packing Type : Carton
• Body Material : ss
• Flow Rate : 250-600
• Finish : Painted
• Media : all
• Material : Stainless Steel
• Pressure : High
• Brand Name : PRIMECH

Stainless Steel Etc Pressure Reducing Valve

• MOQ : 5 Piece(s)
• End Coneection : Flanged, Screwed.
• Seat Leakage : As per Fci-70.02 (ansi B 16.104) Class Iv, V and Vi(standard Leakage Rates) Metal to Soft Seating –
• Application : Pharmaceutical And Other Process Industries.
• Series N0 : 501
• Size & Ratings : 15 mm to 150mm ANSI 150# to 300# .
• Design : ASME B 16.34
• Material : Stainless Steel Etc
• Trim Material : Stainless Steel

Carbon Steel Safety Relief Valve

• Design Std. : ANSI 16.34 API 520/526
• Seat : Metal to metal, soft seated.
• End Connection : Flanged, Screwed
• Valve Size & Rating : 2” to 6” ANSI 150# to 600#
• Set Pressure : As per client specification
• Testing Standard : API 527
• Material : Carbon Steel, Stainless Steel

Y Type Strainer Valve

• Valve Size & Rating : 2” to 12” ANSI 150# to 300#
• Testing : BS 6755, 5146,API 598
• Features : Compact Design, Suitable for Liquid, Gas.
• Face To Face : Mfg Std.,B16.5
• Number Of Flower : Basket Type
• Design Std. : ASME 16.34, BS 1873
• Mesh : As per Requirement

Aluminium Water Solenoid Valve

• MOQ : 5 Piece
• Material : Aluminium, Brass, SS
• Temperature : 0 to 80 deg C
• Brand : FLUIDTECQ
• Media : Water, Air, Oil, Gas
• Valve Size : 1/2" , 1/4" , 1" , 1.5" & 2"
• Coil Voltage : 24VDC, 230V AC, 110V AC

Aluminium Non Return Valve, Valve Size : 1/4

• Pressure : 0-10 Bar
• Valve Size : 1/4
• Material : Aluminium
• Size : 1/4
• Construction : Inline
• Brand : FLUIDTECQ
• Media : Air
• End Connection : Screwed

CLASS #150 Stainless Steel Ball Valve

• Material : Stainless Steel
• Brand : FLUIDTECQ
• Steel Grade : CF8, CF8M, CF3M
• Media : Water, Gas, Air
• Pressure : CLASS #150
• End Connection Type : Flanged
• Material Grade : CF8, CF8M
• Automation Grade : Manual
• Size : 1" to 8"

Carbon Steel Safety Valve, For Gas Fitting, Feature : Casting Approved, Corrosion Proof, Durable

• MOQ : 20 Piece(s)
• Pressure : High
• End Connection : Butt Weld, Screwed
• Application : Gas Fitting
• Material : Carbon Steel, Cast Iron, Forged Steel
• Feature : Casting Approved, Corrosion Proof, Durable

1000 Kpa Carbon Steeel Butterfly Valve

• Power : Hydraulic, Solenoid
• Port Size : 5cm-60cm
• Pressure : 1000 Kpa
• Technics : Hard Sealing
• Structure : Double Half Shaft
• Material : Carbon Steeel, Stainless Steel

Carbon Steeel Check Valve, Size : Multisize

• Pressure : High Pressure
• Material : Carbon Steeel
• Number Of Way : 2way, 4way
• Size : Multisize
• Feature : Casting Approved, Durable
• Application : Gas Fitting, Water Fitting

Karamsheel Cast Iron Solenoid Valve, Operating Temperature : -10 To 80 Degree C.

• Operating Pressure : 150 PSI (230 AC Coil)
• Operating Temperature : -10 To 80 Degree C.
• Coil Protection Insulation Class : H Class IP65
• Size : 1/4 to 4 Inch
• Brand Name : Karamsheel
• Material : Cast Iron

Safety Shut Off Valve

350gm Stainless Steel Valve, Color : Silver

• MOQ : 2 Piece
• Material Grade : SS304
• Media : Water
• Usage/Application : Industrial
• Valve Size : 3 inch
• Connection Type : Flanged
• Operating Pressure : 68 Bar
• Availability : 350gm

Silver Orange Stainless Steel Ball Valve

• Automation Grade : Semi-Automatic
• Pressure Rating : 1000 PSI
• Valve Size : 4.0 inch
• Material : Stainless Steel
• Steel Grade : SS304
• Model : S8380
• Media : Water

Stainless Steel Angle Valve, Pressure : Medium Pressure

• Angle Type : Valve
• Pressure : Medium Pressure
• Usage/Application : Water
• Size : 4 Inch
• Maximum Pressure : 60 PSI
• Surface Finishing : Silver Plated
• Material : Stainless Steel