Post Buy Requirement
TM
Nashik, Maharashtra, India
Add Review

Other Products / Services

Turns Ratio

The Motwane make XWRM-10 is a dual channel, 10A rated, Transformer Winding Resistance Meter. The instrument has one Current channel and two Resistance channels provided with an open circuit voltage of 42Volts, for fast charging of the highly inductive windings of transformers, to provide stable resistance values in minimum time. The XWRM-10 is intended to replace complex bridge set up with a single compact instrument. The XWRM-10 is based on 4-wire measurement method to measure low resistance accurately. The instrument is well protected against inductive kickbacks offered by the inductive windings and gives stable reading on various types of transformers.


FEATURES :


  • Simultaneous measurement of dual channels for resistance and single channel for current

  • Selectable test current 10A, 1A, 100mA, 10mA

  • Seven measurement Ranges: 2m to 2000

  • OLTC Testing

  • Special mode for conducting heat run test

  • Built in memory storage up to 99 records

  • 4 digit reading for resistance measurement

  • Data exchange to PC through USB interface

  • Auto discharge facility with Indication


  • SUPPLIED


    Standard Accessories

    • 15 meter strong cables with Heavy duty alligator clips: 1 Set (6 Nos : I+, I-, Ch1+, Ch1-, Ch2+, Ch2-)

    • Mains power cord

    • 5 meter Short link

    • 5 meter Earthing cable

    • User Manual

    • Calibration Sheet

    • Carrying Case



    Optional Accessories

    • Software

    • USB Cord





View Complete Details

Micro-ohmmeter

The Motwane make Contact Resistance Meter (Model:PCRM-200S) is a digital micro-ohmmeter, specially designed to measure extremely low resistances in micro ohm. The Instrument is based on Kelvin 4- wire connection method for measurement of low resistance. The Current injection is 100A/200A. Test information like current injected with measured resistance & voltage drop is displayed with real time data on large LCD with backlit. This user friendly Instrument and it's accessories are housed in easy transportation case. Advanced Windows based software is provided for data downloading, analysis and report generation. Internal memory of 99 records is provided for onsite data storage. Thermal printer is the additional feature provided to print the test results.


FEATURES




  • Direct mV drop reading

  • 100A /200A DC selectable test current

  • Ranges: 20 , 200 , 2000 & 20 m

  • Dual Grounding Facility





  • Mains and Battery operated

  • Minimum resolution of 0.1

  • Internal memory of 199 test results

  • Built in thermal printer & PC interface through USB


  • SUPPLIED


    Standard Accessories

    • 1 set of 15 meter strong cable with C Clamp 75mm opening

    • 1 set of Master Earthing Cable (7 meter)

    • Mains power cord

    • User Manual

    • Calibration Certificate

    • Thermal Paper Roll



    Optional Accessories

    • 22 meter strong cable with C Clamp 50mm/100mm/150mm jaw size

    • Heavy Crocodile clip 25mm jaw size

    • 03 meter cable (Heavy Crocodile clip 25mm jaw)

    • Software

    • USB Cord







View Complete Details

Utility Substation Equipment

The Motwane IT-51 is a microprocessor based Digital Insulation tester designed for testing of all types electrical installation like transformers, switchgear, motors, generators and utility substation equipments. The instrument automatically performs Polarization index by selecting PI mode. IT-51 has a large LCD blue backlit display, it shows leakage current in scrolling form along with IR value and PI value. It is rechargeable battery operated and AC mains provision for battery charging.


FEATURES




  • Selectable test voltage 250V, 500V, 1000V, 2500V, 5000V.

  • Insulation Resistance measurement up to 1T

  • Short circuit current 1.4mA

  • Mains & battery operation

  • Polarization Index measurement facility

  • AC/DC voltage measurement up to 600V.





  • Two Programmable timer from 0 Sec to 99 minutes.

  • Liquid Crystal Display with pleasant white backlight.

  • Internal rechargeable Battery.

  • Guard terminal to minimize the surface leakage

  • Safety - IP 54, CAT IV 600V and CE conformity


  • SUPPLIED


    Standard Accessories

    • 3 x 3m Test lead with large alligator clip

    • Mains Cord

    • Instruction Manual

    • Calibration Certificate

    • Carry Case



    Optional Accessories

    • 3 x 10m Test lead with large alligator clip







View Complete Details

Automatic Diagnostic Kits

The New 5 kV Diagnostic insulation tester (Model: 5K PI) from MOTWANE is designed to conduct automatic diagnostic tests on high voltage equipments like Transformers, Cables, Bushings, Switchgears and rotating machines. Designed & developed indigenously at the state of the art R&D laboratory, the 5K PI is a microprocessor based instrument deploying latest technology and very high speed data sampling to give correct, repetitive and durable performance under harsh conditions. It is mains and battery operated weighing less than 5 kgs making it truly light weight & compact insulation resistance tester for outdoor applications. The instrument is specially designed to suit operator's ease and test requirement. The instrument and its accessories are certified as per relevant IS/IEC standards.


FEATURES :


  • Programmable test voltage 250 - 5000V in steps of 50V

  • Insulation Resistance upto 10T

  • Three programmable timers

  • Modes for conducting IR, Leakage current, PI, DAR, DD, SV and BDV test

  • Mains & Battery Operation

  • 1000 test result storage

  • Optically Isolated RS 232 port & USB port

  • Capacitance & AC / DC Voltage measurement

  • Short Circuit current of 3mA/5mA


  • SUPPLIED


    Standard Accessories

    • 3 x 3m test leads with large insulated clamps

    • 1.5m Main power cord

    • Mains protected fuse

    • Instruction Manual

    • RS 232 communication Cable

    • USB Cable

    • Carrying Bag



    Optional Accessories

    • 3 X 10m test leads with large insulated clamps

    • RS 232 to USB converter

    • Software CD





View Complete Details

Circuit Breaker Timer

A circuit breaker timing test is the process of measuring the mechanical operating times with the goal of verifying, analyzing and validating the correct function of the circuit breaker. MCBT-P Motwanes Circuit Breaker Timer kit designed to measure Close, Open & Close-Open timing with bounce of Circuit Breakers upto 220KV ratings. The USB interface provided for data transfer & report generation along with internal memory of 100 results. Inbuilt Printer facility for onsite report. The MCBT-P is battery operated, lightweight, rugged & portable for field operations.


FEATURES :


  • 3 / 4 pole measurement simultaneously

  • C, O, C-O with bounce time measurement

  • Mains cum Battery operation

  • Timer range: 0 to 9999.9mSec

  • Resolution: 0.1ms

  • Built-in Thermal Printer

  • Internal memory for 100 records

  • USB interface for data transfer & report

  • Compact and lightweight


  • SUPPLIED


    Standard Accessories

    • Test Lead Set - 10Meter long

    • Control Cable - 5Meter long

    • Earthing Cable - 5Meter long

    • Mains Cord



    Optional Accessories

    • Thermal Paper Roll * 1 No

    • Software CD & USB Cable

    • Instruction Manual





View Complete Details

Clampmeter

DCM10A has a 0.01mA resolution for measuring earth leakage currents, 300A range for standard current measurements. And analogue Bar Graph Display for trending. Handguard designed for operator safety. Pocket sized and lightweight. Jaw size 40mm.


FEATURES




  • 0.01 mA resolution for measuring earth leakage currents.

  • 300 A range for standard current measurements.

  • Analogue Bargraph Display for trending.





  • Pocket sized and lightweight.

  • Jaw size 40mm .

  • Standard Accessories


    • Carrying Case

    • Battery Installed

    • Add Instruction Manual






View Complete Details

Turnstile Security System

  • Weight 230 KG approx
  • Dimension (L X D X H)mm 1500 x 1455 x 2220 mm ±5%
Motwane's Full Height Turnstile is intended for maximum safety of high profile area. It consists electromechanical head assembly with rotor, logic control unit and damper, which offers trouble-free action even in unfavorable environments
View Complete Details

Full Height Turnstiles

  • Weight 230 KG approx
  • Dimension (L X D X H)mm 1500 x 1455 x 2220 mm ±5%
Motwane's Full Height Turnstile is intended for maximum safety of high profile area. It consists electromechanical head assembly with rotor, logic control unit and damper, which offers trouble-free action even in unfavorable environments
View Complete Details

LA Current Monitoring

The MLCM is a light weight, cost effective, portable and handy device, designed to monitor healthiness of lightening arresters (LA). It measures the fundamental and third harmonic leakage current down to a micro ampere. MLCM makes it easy for maintenance crew to check and monitor in-service lightning arresters in a periodic manner and ascertain their health. When LA's deteriorate, the third harmonic leakage current also increases which provides a clear indication for maintenance crew to take immediate action. As per IEC60099-5 B1 method, third harmonic @ 20 degree is resistive and directly co-relates to health of LA. The MLCM is also provided with android app to enable user to get the reports on smartphones without the need of kit or laptop to see and analyse data.


FEATURES




  • Simultaneous measurement of fundamental & 3rd harmonic leakage current

  • Highly immune to noise in the system

  • Auto correction values @ 20 C





  • Android App for data transfer, analysis and trend monitoring

  • Compact & lightest in the world

  • IP54 Ingress Protection


  • SUPPLIED
    Standard Accessories


    • Cable for data transfer

    • Spare Battery - 9V

    • Instruction Manual





    • Test Lead with Clamp

    • Mobile (Android) with Charger

    • Battery chager - 9V






View Complete Details

Tripod Turnstile

5.50 Lakh /Piece Get Latest Price
  • Size 420 X 255 X 1030 mm ±5%
  • Type Electromechanical Tripod
  • Brand Name Motwane
  • Material SS / MSPC
  • Application Security Access Control
  • Power < 40 Watts
  • Finish M.S. powder coated / Stainless steel
  • Guarantee 01 Year Warranty
  • Model Number MTS - ESS -1 / MTS - ESS -2 / MTS - EPC -1 / MTS - EPC -2
  • Place of Origin India
Solenoid locking mechanism
Bi-directional operational control
Positive action lock to prevent two passage at one time
Integration with all type of access control available in the market
Arms becomes free in case of power failure
Dynamic LED passage indicator
Low power consumption
The built-in hydraulic damper provides smooth & silent operation of the turnstile
View Complete Details

Transformer Testing

MOTR is a multifunctional, automatic test kit designed for accurate measurement of the Dielectric Constant, Tan Delta, Resistivity & Capacitance of transformer oil & other electrical insulating liquids. It has pre-programmed test sequences as per various international standards along with customized test sequences as per user requirements. The kit has an internal memory for storage of 250 tests and is provided with PC interface & report generation facility. MOTR is also equipped with an inbuilt thermal printer for onsite results. Test cell is designed as per IEC 247 with calibrator for onsite calibration of kit.


FEATURES




  • Tests for Dissipation factor, Volume Resistivity, Dielectric constant, Watt loss

  • Oil test heating chamber with precise temperature control

  • Test cell according to IEC 60247

  • Pre-programmed & customized Test sequences

  • Inbuilt thermal printer

  • Internal memory for storing 250 tests





  • PC interface for report generation

  • Portable calibrator for onsite calibration of kit

  • User friendly functions and operations

  • Sample oil auto-drain facility (optional)

  • 5 pre-defined oil cell values


  • SUPPLIED


    Standard Accessories

    • Test lead sets

    • Oil Test cell with 3 terminals

    • Standard Calibrator with Tan Delta, Capacitance & Resistivity values



    Optional Accessories

    • Transportation case







View Complete Details

Safety Ohmmeter

  • range 1 m ohm on 2 ohm
LR 201 - Low Resistance Safety Ohm Meter With Low Current Injection For Hazardous area like fuse in detonators where current should not exceed 10mA, 4 wire measurement to avoid lead resistance. 312 Digit LCD Display. Resolution 1 m ohm on 2 ohm range. Battery operated.Ratiometric Measurements. Gold plated terminals for low thermal effect. Fully protected against reversal of battery polarity and over loads. 'PUSH TO READ' Switch for additional safety.
View Complete Details

Low Resistance

We are leading manufacturer and supplier of low resistance and winding resistance.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shri Sagar (Kishor Mulay)/09096080768 (The Motwane Manufacturing Company Pvt. Ltd.)
  • Gyan Baug, Nashik Road - 422 101 Nashik, Maharashtra - 400052, India
  • Share us via
Turns Ratio automatic diagnostic kits Manufacturer from Nashik, Maharashtra
Post Buy Requirement
TM
Nashik, Maharashtra, India
Add Review

Other Products / Services

Turns Ratio

The Motwane make XWRM-10 is a dual channel, 10A rated, Transformer Winding Resistance Meter. The instrument has one Current channel and two Resistance channels provided with an open circuit voltage of 42Volts, for fast charging of the highly inductive windings of transformers, to provide stable resistance values in minimum time. The XWRM-10 is intended to replace complex bridge set up with a single compact instrument. The XWRM-10 is based on 4-wire measurement method to measure low resistance accurately. The instrument is well protected against inductive kickbacks offered by the inductive windings and gives stable reading on various types of transformers.


FEATURES :


  • Simultaneous measurement of dual channels for resistance and single channel for current

  • Selectable test current 10A, 1A, 100mA, 10mA

  • Seven measurement Ranges: 2m to 2000

  • OLTC Testing

  • Special mode for conducting heat run test

  • Built in memory storage up to 99 records

  • 4 digit reading for resistance measurement

  • Data exchange to PC through USB interface

  • Auto discharge facility with Indication


  • SUPPLIED


    Standard Accessories

    • 15 meter strong cables with Heavy duty alligator clips: 1 Set (6 Nos : I+, I-, Ch1+, Ch1-, Ch2+, Ch2-)

    • Mains power cord

    • 5 meter Short link

    • 5 meter Earthing cable

    • User Manual

    • Calibration Sheet

    • Carrying Case



    Optional Accessories

    • Software

    • USB Cord





View Complete Details

Micro-ohmmeter

The Motwane make Contact Resistance Meter (Model:PCRM-200S) is a digital micro-ohmmeter, specially designed to measure extremely low resistances in micro ohm. The Instrument is based on Kelvin 4- wire connection method for measurement of low resistance. The Current injection is 100A/200A. Test information like current injected with measured resistance & voltage drop is displayed with real time data on large LCD with backlit. This user friendly Instrument and it's accessories are housed in easy transportation case. Advanced Windows based software is provided for data downloading, analysis and report generation. Internal memory of 99 records is provided for onsite data storage. Thermal printer is the additional feature provided to print the test results.


FEATURES




  • Direct mV drop reading

  • 100A /200A DC selectable test current

  • Ranges: 20 , 200 , 2000 & 20 m

  • Dual Grounding Facility





  • Mains and Battery operated

  • Minimum resolution of 0.1

  • Internal memory of 199 test results

  • Built in thermal printer & PC interface through USB


  • SUPPLIED


    Standard Accessories

    • 1 set of 15 meter strong cable with C Clamp 75mm opening

    • 1 set of Master Earthing Cable (7 meter)

    • Mains power cord

    • User Manual

    • Calibration Certificate

    • Thermal Paper Roll



    Optional Accessories

    • 22 meter strong cable with C Clamp 50mm/100mm/150mm jaw size

    • Heavy Crocodile clip 25mm jaw size

    • 03 meter cable (Heavy Crocodile clip 25mm jaw)

    • Software

    • USB Cord







View Complete Details

Utility Substation Equipment

The Motwane IT-51 is a microprocessor based Digital Insulation tester designed for testing of all types electrical installation like transformers, switchgear, motors, generators and utility substation equipments. The instrument automatically performs Polarization index by selecting PI mode. IT-51 has a large LCD blue backlit display, it shows leakage current in scrolling form along with IR value and PI value. It is rechargeable battery operated and AC mains provision for battery charging.


FEATURES




  • Selectable test voltage 250V, 500V, 1000V, 2500V, 5000V.

  • Insulation Resistance measurement up to 1T

  • Short circuit current 1.4mA

  • Mains & battery operation

  • Polarization Index measurement facility

  • AC/DC voltage measurement up to 600V.





  • Two Programmable timer from 0 Sec to 99 minutes.

  • Liquid Crystal Display with pleasant white backlight.

  • Internal rechargeable Battery.

  • Guard terminal to minimize the surface leakage

  • Safety - IP 54, CAT IV 600V and CE conformity


  • SUPPLIED


    Standard Accessories

    • 3 x 3m Test lead with large alligator clip

    • Mains Cord

    • Instruction Manual

    • Calibration Certificate

    • Carry Case



    Optional Accessories

    • 3 x 10m Test lead with large alligator clip







View Complete Details

Automatic Diagnostic Kits

The New 5 kV Diagnostic insulation tester (Model: 5K PI) from MOTWANE is designed to conduct automatic diagnostic tests on high voltage equipments like Transformers, Cables, Bushings, Switchgears and rotating machines. Designed & developed indigenously at the state of the art R&D laboratory, the 5K PI is a microprocessor based instrument deploying latest technology and very high speed data sampling to give correct, repetitive and durable performance under harsh conditions. It is mains and battery operated weighing less than 5 kgs making it truly light weight & compact insulation resistance tester for outdoor applications. The instrument is specially designed to suit operator's ease and test requirement. The instrument and its accessories are certified as per relevant IS/IEC standards.


FEATURES :


  • Programmable test voltage 250 - 5000V in steps of 50V

  • Insulation Resistance upto 10T

  • Three programmable timers

  • Modes for conducting IR, Leakage current, PI, DAR, DD, SV and BDV test

  • Mains & Battery Operation

  • 1000 test result storage

  • Optically Isolated RS 232 port & USB port

  • Capacitance & AC / DC Voltage measurement

  • Short Circuit current of 3mA/5mA


  • SUPPLIED


    Standard Accessories

    • 3 x 3m test leads with large insulated clamps

    • 1.5m Main power cord

    • Mains protected fuse

    • Instruction Manual

    • RS 232 communication Cable

    • USB Cable

    • Carrying Bag



    Optional Accessories

    • 3 X 10m test leads with large insulated clamps

    • RS 232 to USB converter

    • Software CD





View Complete Details

Circuit Breaker Timer

A circuit breaker timing test is the process of measuring the mechanical operating times with the goal of verifying, analyzing and validating the correct function of the circuit breaker. MCBT-P Motwanes Circuit Breaker Timer kit designed to measure Close, Open & Close-Open timing with bounce of Circuit Breakers upto 220KV ratings. The USB interface provided for data transfer & report generation along with internal memory of 100 results. Inbuilt Printer facility for onsite report. The MCBT-P is battery operated, lightweight, rugged & portable for field operations.


FEATURES :


  • 3 / 4 pole measurement simultaneously

  • C, O, C-O with bounce time measurement

  • Mains cum Battery operation

  • Timer range: 0 to 9999.9mSec

  • Resolution: 0.1ms

  • Built-in Thermal Printer

  • Internal memory for 100 records

  • USB interface for data transfer & report

  • Compact and lightweight


  • SUPPLIED


    Standard Accessories

    • Test Lead Set - 10Meter long

    • Control Cable - 5Meter long

    • Earthing Cable - 5Meter long

    • Mains Cord



    Optional Accessories

    • Thermal Paper Roll * 1 No

    • Software CD & USB Cable

    • Instruction Manual





View Complete Details

Clampmeter

DCM10A has a 0.01mA resolution for measuring earth leakage currents, 300A range for standard current measurements. And analogue Bar Graph Display for trending. Handguard designed for operator safety. Pocket sized and lightweight. Jaw size 40mm.


FEATURES




  • 0.01 mA resolution for measuring earth leakage currents.

  • 300 A range for standard current measurements.

  • Analogue Bargraph Display for trending.





  • Pocket sized and lightweight.

  • Jaw size 40mm .

  • Standard Accessories


    • Carrying Case

    • Battery Installed

    • Add Instruction Manual






View Complete Details

Turnstile Security System

  • Weight 230 KG approx
  • Dimension (L X D X H)mm 1500 x 1455 x 2220 mm ±5%
Motwane's Full Height Turnstile is intended for maximum safety of high profile area. It consists electromechanical head assembly with rotor, logic control unit and damper, which offers trouble-free action even in unfavorable environments
View Complete Details

Full Height Turnstiles

  • Weight 230 KG approx
  • Dimension (L X D X H)mm 1500 x 1455 x 2220 mm ±5%
Motwane's Full Height Turnstile is intended for maximum safety of high profile area. It consists electromechanical head assembly with rotor, logic control unit and damper, which offers trouble-free action even in unfavorable environments
View Complete Details

LA Current Monitoring

The MLCM is a light weight, cost effective, portable and handy device, designed to monitor healthiness of lightening arresters (LA). It measures the fundamental and third harmonic leakage current down to a micro ampere. MLCM makes it easy for maintenance crew to check and monitor in-service lightning arresters in a periodic manner and ascertain their health. When LA's deteriorate, the third harmonic leakage current also increases which provides a clear indication for maintenance crew to take immediate action. As per IEC60099-5 B1 method, third harmonic @ 20 degree is resistive and directly co-relates to health of LA. The MLCM is also provided with android app to enable user to get the reports on smartphones without the need of kit or laptop to see and analyse data.


FEATURES




  • Simultaneous measurement of fundamental & 3rd harmonic leakage current

  • Highly immune to noise in the system

  • Auto correction values @ 20 C





  • Android App for data transfer, analysis and trend monitoring

  • Compact & lightest in the world

  • IP54 Ingress Protection


  • SUPPLIED
    Standard Accessories


    • Cable for data transfer

    • Spare Battery - 9V

    • Instruction Manual





    • Test Lead with Clamp

    • Mobile (Android) with Charger

    • Battery chager - 9V






View Complete Details

Tripod Turnstile

5.50 Lakh /Piece Get Latest Price
  • Size 420 X 255 X 1030 mm ±5%
  • Type Electromechanical Tripod
  • Brand Name Motwane
  • Material SS / MSPC
  • Application Security Access Control
  • Power < 40 Watts
  • Finish M.S. powder coated / Stainless steel
  • Guarantee 01 Year Warranty
  • Model Number MTS - ESS -1 / MTS - ESS -2 / MTS - EPC -1 / MTS - EPC -2
  • Place of Origin India
Solenoid locking mechanism
Bi-directional operational control
Positive action lock to prevent two passage at one time
Integration with all type of access control available in the market
Arms becomes free in case of power failure
Dynamic LED passage indicator
Low power consumption
The built-in hydraulic damper provides smooth & silent operation of the turnstile
View Complete Details

Transformer Testing

MOTR is a multifunctional, automatic test kit designed for accurate measurement of the Dielectric Constant, Tan Delta, Resistivity & Capacitance of transformer oil & other electrical insulating liquids. It has pre-programmed test sequences as per various international standards along with customized test sequences as per user requirements. The kit has an internal memory for storage of 250 tests and is provided with PC interface & report generation facility. MOTR is also equipped with an inbuilt thermal printer for onsite results. Test cell is designed as per IEC 247 with calibrator for onsite calibration of kit.


FEATURES




  • Tests for Dissipation factor, Volume Resistivity, Dielectric constant, Watt loss

  • Oil test heating chamber with precise temperature control

  • Test cell according to IEC 60247

  • Pre-programmed & customized Test sequences

  • Inbuilt thermal printer

  • Internal memory for storing 250 tests





  • PC interface for report generation

  • Portable calibrator for onsite calibration of kit

  • User friendly functions and operations

  • Sample oil auto-drain facility (optional)

  • 5 pre-defined oil cell values


  • SUPPLIED


    Standard Accessories

    • Test lead sets

    • Oil Test cell with 3 terminals

    • Standard Calibrator with Tan Delta, Capacitance & Resistivity values



    Optional Accessories

    • Transportation case







View Complete Details

Safety Ohmmeter

  • range 1 m ohm on 2 ohm
LR 201 - Low Resistance Safety Ohm Meter With Low Current Injection For Hazardous area like fuse in detonators where current should not exceed 10mA, 4 wire measurement to avoid lead resistance. 312 Digit LCD Display. Resolution 1 m ohm on 2 ohm range. Battery operated.Ratiometric Measurements. Gold plated terminals for low thermal effect. Fully protected against reversal of battery polarity and over loads. 'PUSH TO READ' Switch for additional safety.
View Complete Details

Low Resistance

We are leading manufacturer and supplier of low resistance and winding resistance.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shri Sagar (Kishor Mulay)/09096080768 (The Motwane Manufacturing Company Pvt. Ltd.)
  • Gyan Baug, Nashik Road - 422 101 Nashik, Maharashtra - 400052, India
  • Share us via