Product / Services
Post Buy Requirement
Tiru Embedded India Pvt. Ltd.
Tiru Embedded India Pvt. Ltd.
Rajkot, Gujarat, India
Add Review
Call 08068051347 Ext. 537

Our Product / Services

  1. Electronic Development Boards 17 Products available
  2. Business And Corporate Gifts 5 Products available
  3. Digital Video Recorders 3 Products available
  4. Others 10 Products / Services available

Electronic Development Boards #2286523

Pro Mini (arduino)

Pro Mini (arduino)
We are offering pro mini microcontroller boards. The arduino pro mini is a microcontroller board based on the atmega168 (datasheet). It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an ftdi cable or sparkfun breakout board to provide usb power and communication to the board.
The arduino pro mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the arduino mini. There are two version of the pro mini. One runs at 3.3v and 8 mhz, the other at 5v and 16 mhz. The arduino pro mini was designed and manufactured by sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Lily Pad (arduino)

Lily Pad (arduino)
We are offering lily pad (arduino). The lily pad arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the atmega168v (the low-power version of the atmega168) (data sheet) or the atmega328v (data sheet). The lily pad arduino was designed and developed by leah buechley and sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Arduino Robot

Arduino Robot
We are offering arduino robot.
The arduino robot is the first official arduino on wheels. The robot has two processors, one on each of its two boards. The motor board controls the motors, and the control board reads sensors and decides how to operate. Each of the boards is a full arduino board programmable using the arduino ide. Both motor and control boards are microcontroller boards based on the atmega32u4 (datasheet). The robot has many of its pins mapped to on-board sensors and actuators. Programming the robot is similar to the process with the arduino leonardo. Both processors have built-in usb communication, eliminating the need for a secondary processor. This allows the robot to appear to a connected computer as a virtual (cdc) serial & com port. As always with arduino, every element of the platform hardware, software and documentation is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own robots. The arduino robot is the result of the collective effort from an international team looking at how science can be made fun to learn.
View Complete Details
Ask Latest Price & Details
Wireless Sd Shield (arduino) Microcontroller Boards

Wireless Sd Shield (arduino) Microcontroller Boards
We are offering wireless sd shield (arduino) microcontroller boards. The wireless sd shield allows an arduino board to communicate wirelessly using a wireless module. It is based on the xbee modules from digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serialusb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the xbee's pins to a through-hole solder pad.
Included on board is a sd card slot. When using the sd library to access the card, pin 4 is cs and cannot be used otherwise. Spi also relies on pins 11, 12, and 13 for communication. An on-board switch allows the wireless module to communicate with the usb-to-serial converter or with the microntroller.
View Complete Details
Ask Latest Price & Details
motor shield

Motor Shield
We are offering motor shield.
The arduino motor shield is based on the l298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, dc and stepping motors. It lets you drive two dc motors with your arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is tinkerkit compatible, which means you can quickly create projects by plugging tinkerkit modules to the board.
View Complete Details
Ask Latest Price & Details
Arduino Prototyping Shield

Arduino Prototyping Shield
  • Country of Origin India
  • Size Customised
  • Type Arduino Shield

We are offering proto shield. The arduino prototyping shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the arduino io pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and arduino into a single module.

View Complete Details
Ask Latest Price & Details
Arduino Tre Microcontroller Boards

Arduino Tre Microcontroller Boards
Arduino tre, the first arduino board manufactured in the u.s. Thanks to the 1-ghz sitara am335x processor, arduino developers get up to 100 times more performance with the sitara-processor-based tre than they do on the arduino leonardo or uno. This performance opens the doors to more advanced linux-powered applications. The sitara-processor-based linux arduino can run high-performance desktop applications, processing-intensive algorithms or high-speed communications. The arduino tre is a sitara-processor-based linux arduino plus a full avr-based arduino, while leveraging the simplicity of the arduino software experience. The integration of the avr arduino enables the arduino tre to use the existing shield ecosystem so that innovators can expand the arduino tre to develop a wide range of high-performance applications such as 3d printers, gateways for building automation and lighting automation, telemetry hubs that collect data from nearby sensors wirelessly, and other connected applications that require host control plus real-time operations. In addition, the arduino tre is partially the result of a close collaboration between arduino and the beagleboard.org foundation. These open hardware pioneers share a passion for expanding open source development and making technology accessible for artists, designers and hobbyists. The tre design builds upon the experience of both arduino and beagleboard.org, combining the benefits of both community based boards.
View Complete Details
Ask Latest Price & Details
Arduino Yun Microcontroller Board

Arduino Yun Microcontroller Board
We are offering arduino yun microcontroller board. The arduino yn is a microcontroller board based on the atmega32u4 (datasheet) and the atheros ar9331. The atheros processor supports a linux distribution based on openwrt named openwrt-yun. The board has built-in ethernet and wifi support, a usb-a port, micro-sd card slot, 20 digital input & output pins (of which 7 can be used as pwm outputs and 12 as analog inputs), a 16 mhz crystal oscillator, a micro usb connection, an icsp header, and a 3 reset buttons.
View Complete Details
Ask Latest Price & Details
Arduino Uno

Arduino Uno
900 /Set Get Latest Price
  • Min. Order (MOQ) 5 Set(s)
The arduino uno is a microcontroller board based on the atmega328 (datasheet). It has 14 digital input output pins (of which 6 can be used as pwm outputs), 6 analog inputs, a 16 mhz ceramic resonator, a usb connection, a power jack, an icsp header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a usb cable or power it with a ac-to-dc adapter or battery to get started.

The uno differs from all preceding boards in that it does not use the ftdi usb-to-serial driver chip. Instead, it features the atmega16u2 (atmega8u2 up to version r2) programmed as a usb-to-serial converter.
Revision 2 of the uno board has a resistor pulling the 8u2 hwb line to ground, making it easier to put into dfu mode.

Revision 3 of the board has the following new features:

1.0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the reset pin, the ioref that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the avr, which operates with 5v and with the arduino due that operates with 3.3v. The second one is a not connected pin, that is reserved for future purposes.
stronger reset circuit.
atmega 16u2 replace the 8u2.

"uno" means one in italian and is named to mark the upcoming release of arduino 1.0. The uno and version 1.0 will be the reference versions of arduino, moving forward. The uno is the latest in a series of usb arduino boards, and the reference model for the arduino platform; for a comparison with previous versions, see the index of arduino boards.

Additional Information:

Payment Terms : T/T

Delivery Time : Depend on Order Quantity

View Complete Details
Ask Latest Price & Details
Arduino Leonardo Microcontroller Board

Arduino Leonardo Microcontroller Board
The arduino leonardo is a microcontroller board based on the atmega32u4 (datasheet). It has 20 digital inputoutput pins (of which 7 can be used as pwm outputs and 12 as analog inputs), a 16 mhz crystal oscillator, a micro usb connection, a power jack, an icsp header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a usb cable or power it with a ac-to-dc adapter or battery to get started.
The leonardo differs from all preceding boards in that the atmega32u4 has built-in usb communication, eliminating the need for a secondary processor. This allows the leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (cdc) serial & com port. It also has other implications for the behavior of the board; these are detailed on the getting started page.

Summary

microcontroller : atmega32u4
operating voltage: 5v
input voltage (recommended): 7-12v
input voltage (limits) : 6-20v
digital io pins: 20
pwm channels: 7
analog input channels: 12
dc current per io pin: 40 ma
dc current for 3.3v pin: 50 ma
flash memory: 32 kb (atmega32u4) of which 4 kb used by bootloader
sram: 2.5 kb (atmega32u4)
eeprom: 1 kb (atmega32u4)
clock speed: 16 mhz
View Complete Details
Ask Latest Price & Details
Mini (arduino) Microcontroller Board

Mini (arduino) Microcontroller Board
We are offering mini (arduino) microcontroller board. With the 328.(datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, and a 16 mhz crystal oscillator. It can be programmed with the usb serial adapter or other usb or rs232 to ttl serial adapter. The new mini (revision 05) has a new package for the atmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04.
Warning: don't power the arduino mini with more than 9 volts, or plug the power in backwards: you'll probably kill it.
View Complete Details
Ask Latest Price & Details
Microcontroller Boards

Microcontroller Boards
We are offering arduino due.
The arduino due is a microcontroller board based on the atmel sam3x8e arm cortex-m3 cpu (datasheet). It is the first arduino board based on a 32-bit arm core microcontroller. It has 54 digital input & output pins (of which 12 can be used as pwm outputs), 12 analog inputs, 4 uarts (hardware serial ports), a 84 mhz clock, an usb otg capable connection, 2 dac (digital to analog), 2 twi, a power jack, an spi header, a jtag header, a reset button and an erase button.
Warning: unlike other arduino boards, the arduino due board runs at 3.3v. The maximum voltage that the io pins can tolerate is 3.3v. Providing higher voltages, like 5v to an io pin could damage the board. The board contains everything needed to support the microcontroller, simply connect it to a computer with a micro-usb cable or power it with a ac-to-dc adapter or battery to get started. The due is compatible with all arduino shields that work at 3.3v and are compliant with the 1.0 arduino pinout.

The due follows the 1.0 pinout:

twi: sda and scl pins that are near to the aref pin.
the ioref pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3v board like the due and avr-based boards which operate at 5v.
an unconnected pin, reserved for future use.

the due has a dedicated forum for discussing the board.
View Complete Details
Ask Latest Price & Details
Mega ADK (Arduino) microcontroller board

Mega ADK (Arduino) Microcontroller Board
the arduino mega adk is a microcontroller board based on the atmega2560 (datasheet). it has a usb host interface to connect with android based phones, based on the max3421e ic. it has 54 digital inputoutput pins (of which 15 can be used as pwm outputs), 16 analog inputs, 4 uarts (hardware serial ports), a 16 mhz crystal oscillator, a usb connection, a power jack, an icsp header, and a reset button.
View Complete Details
Ask Latest Price & Details
Arduino Micro Microcontroller Board

Arduino Micro Microcontroller Board
The arduino micro is a microcontroller board based on the atmega32u4 (datasheet), developed in conjunction with adafruit. It has 20 digital inputoutput pins (of which 7 can be used as pwm outputs and 12 as analog inputs), a 16 mhz crystal oscillator, a micro usb connection, an icsp header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro usb cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The micro is similar to the arduino leonardo in that the atmega32u4 has built-in usb communication, eliminating the need for a secondary processor. This allows the micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (cdc) serial com port. It also has other implications for the behavior of the board.
View Complete Details
Ask Latest Price & Details
Arduino Esplora

Arduino Esplora
Arduino Esplora.
The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use set of onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora, check out the Getting Started with Esplora guide. The Esplora has onboard sound and light outputs, and several input sensors, including a joystick, a slider, a temperature sensor, an accelerometer, a microphone, and a light sensor. It also has the potential to expand its capabilities with two Tinkerkit input and output connectors, and a socket for a color TFT LCD screen.
Like the Leonardo board, the Esplora uses an Atmega32U4 AVR microcontroller with 16 MHz crystal oscillator and a micro USB connection capable of acting as a USB client device, like a mouse or a keyboard.
In the upper left corner of the board there is a reset pushbutton, that you can use to restart the board.

There are four status LEDS :

ON [green] indicates whether the board is receiving power supply
L [yellow] connected directly to the microcontroller, accessible through pin 13
RX and TX [yellow] indicates the data being transmitted or received over the USB communication
The board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable to get started.
View Complete Details
Ask Latest Price & Details
Fio (arduino) Microcontroller Board

Fio (arduino) Microcontroller Board
We are offering fio (arduino). The arduino fio is a microcontroller board based on the atmega328p (datasheet) runs at 3.3v and 8 mhz. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. It has connections for a lithium polymer battery and includes a charge circuit over usb. An xbee socket is available on the bottom of the board. The arduino fio is intended for wireless applications. The user can upload sketches with an a ftdi cable or sparkfun breakout board. Additionally, by using a modified usb-to-xbee adaptor such as xbee explorer usb, the user can upload sketches wirelessly. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The arduino fio was designed by shigeru kobayashi and sparkfun electronics, and manufactured by sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Pro (arduino) Microcontroller Board

Pro (arduino) Microcontroller Board
We are offering pro (arduino). The arduino pro is a microcontroller board based on the atmega168 (datasheet) or atmega328 (datasheet). The pro comes in both 3.3v 8 mhz and 5v 16 mhz versions. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 6 analog inputs, a battery power jack, a power switch, a reset button, and holes for mounting a power jack, an icsp header, and pin headers. A six pin header can be connected to an ftdi cable or sparkfun breakout board to provide usb power and communication to the board.
The arduino pro is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with arduino shields. The 3.3v versions of the pro can be powered with a battery. The arduino pro was designed and manufactured by sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Dhrupal Tilava (Tiru Embedded India Pvt. Ltd.)
  • Gokul Nagar Main Road, Street No. 5 Corner, Near Dhara Gas Godown, Gondal Road, Rajkot-360004, Gujarat
  • Share us via
    Linkedin pinterest
  • Call 08068051347 Ext. 537
Retailer of Electronic Development Boards from Rajkot, Gujarat by Tiru Embedded India Pvt. Ltd.
Product / Services
Post Buy Requirement
Tiru Embedded India Pvt. Ltd.
Tiru Embedded India Pvt. Ltd.
Rajkot, Gujarat, India
Add Review
Call 08068051347 Ext. 537

Our Product / Services

  1. Electronic Development Boards 17 Products available
  2. Business And Corporate Gifts 5 Products available
  3. Digital Video Recorders 3 Products available
  4. Others 10 Products / Services available

Electronic Development Boards #2286523

Pro Mini (arduino)

Pro Mini (arduino)
We are offering pro mini microcontroller boards. The arduino pro mini is a microcontroller board based on the atmega168 (datasheet). It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an ftdi cable or sparkfun breakout board to provide usb power and communication to the board.The arduino pro mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the arduino mini. There are two version of the pro mini. One runs at 3.3v and 8 mhz, the other at 5v and 16 mhz. The arduino pro mini was designed and manufactured by sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Lily Pad (arduino)

Lily Pad (arduino)
We are offering lily pad (arduino). The lily pad arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the atmega168v (the low-power version of the atmega168) (data sheet) or the atmega328v (data sheet). The lily pad arduino was designed and developed by leah buechley and sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Arduino Robot

Arduino Robot
We are offering arduino robot.The arduino robot is the first official arduino on wheels. The robot has two processors, one on each of its two boards. The motor board controls the motors, and the control board reads sensors and decides how to operate. Each of the boards is a full arduino board programmable using the arduino ide. Both motor and control boards are microcontroller boards based on the atmega32u4 (datasheet). The robot has many of its pins mapped to on-board sensors and actuators. Programming the robot is similar to the process with the arduino leonardo. Both processors have built-in usb communication, eliminating the need for a secondary processor. This allows the robot to appear to a connected computer as a virtual (cdc) serial & com port. As always with arduino, every element of the platform hardware, software and documentation is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own robots. The arduino robot is the result of the collective effort from an international team looking at how science can be made fun to learn.
View Complete Details
Ask Latest Price & Details
Wireless Sd Shield (arduino) Microcontroller Boards

Wireless Sd Shield (arduino) Microcontroller Boards
We are offering wireless sd shield (arduino) microcontroller boards. The wireless sd shield allows an arduino board to communicate wirelessly using a wireless module. It is based on the xbee modules from digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serialusb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the xbee's pins to a through-hole solder pad.Included on board is a sd card slot. When using the sd library to access the card, pin 4 is cs and cannot be used otherwise. Spi also relies on pins 11, 12, and 13 for communication. An on-board switch allows the wireless module to communicate with the usb-to-serial converter or with the microntroller.
View Complete Details
Ask Latest Price & Details
motor shield

Motor Shield
We are offering motor shield.The arduino motor shield is based on the l298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, dc and stepping motors. It lets you drive two dc motors with your arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is tinkerkit compatible, which means you can quickly create projects by plugging tinkerkit modules to the board.
View Complete Details
Ask Latest Price & Details
Arduino Prototyping Shield

Arduino Prototyping Shield
  • Country of Origin India
  • Size Customised
  • Type Arduino Shield

We are offering proto shield. The arduino prototyping shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the arduino io pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and arduino into a single module.

View Complete Details
Ask Latest Price & Details
Arduino Tre Microcontroller Boards

Arduino Tre Microcontroller Boards
Arduino tre, the first arduino board manufactured in the u.s. Thanks to the 1-ghz sitara am335x processor, arduino developers get up to 100 times more performance with the sitara-processor-based tre than they do on the arduino leonardo or uno. This performance opens the doors to more advanced linux-powered applications. The sitara-processor-based linux arduino can run high-performance desktop applications, processing-intensive algorithms or high-speed communications. The arduino tre is a sitara-processor-based linux arduino plus a full avr-based arduino, while leveraging the simplicity of the arduino software experience. The integration of the avr arduino enables the arduino tre to use the existing shield ecosystem so that innovators can expand the arduino tre to develop a wide range of high-performance applications such as 3d printers, gateways for building automation and lighting automation, telemetry hubs that collect data from nearby sensors wirelessly, and other connected applications that require host control plus real-time operations. In addition, the arduino tre is partially the result of a close collaboration between arduino and the beagleboard.org foundation. These open hardware pioneers share a passion for expanding open source development and making technology accessible for artists, designers and hobbyists. The tre design builds upon the experience of both arduino and beagleboard.org, combining the benefits of both community based boards.
View Complete Details
Ask Latest Price & Details
Arduino Yun Microcontroller Board

Arduino Yun Microcontroller Board
We are offering arduino yun microcontroller board. The arduino yn is a microcontroller board based on the atmega32u4 (datasheet) and the atheros ar9331. The atheros processor supports a linux distribution based on openwrt named openwrt-yun. The board has built-in ethernet and wifi support, a usb-a port, micro-sd card slot, 20 digital input & output pins (of which 7 can be used as pwm outputs and 12 as analog inputs), a 16 mhz crystal oscillator, a micro usb connection, an icsp header, and a 3 reset buttons.
View Complete Details
Ask Latest Price & Details
Arduino Uno

Arduino Uno
900 /Set Get Latest Price
  • Min. Order (MOQ) 5 Set(s)
The arduino uno is a microcontroller board based on the atmega328 (datasheet). It has 14 digital input output pins (of which 6 can be used as pwm outputs), 6 analog inputs, a 16 mhz ceramic resonator, a usb connection, a power jack, an icsp header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a usb cable or power it with a ac-to-dc adapter or battery to get started. The uno differs from all preceding boards in that it does not use the ftdi usb-to-serial driver chip. Instead, it features the atmega16u2 (atmega8u2 up to version r2) programmed as a usb-to-serial converter.Revision 2 of the uno board has a resistor pulling the 8u2 hwb line to ground, making it easier to put into dfu mode. Revision 3 of the board has the following new features: 1.0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the reset pin, the ioref that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the avr, which operates with 5v and with the arduino due that operates with 3.3v. The second one is a not connected pin, that is reserved for future purposes.stronger reset circuit.atmega 16u2 replace the 8u2. "uno" means one in italian and is named to mark the upcoming release of arduino 1.0. The uno and version 1.0 will be the reference versions of arduino, moving forward. The uno is the latest in a series of usb arduino boards, and the reference model for the arduino platform; for a comparison with previous versions, see the index of arduino boards.

Additional Information:

Payment Terms : T/T

Delivery Time : Depend on Order Quantity

View Complete Details
Ask Latest Price & Details
Arduino Leonardo Microcontroller Board

Arduino Leonardo Microcontroller Board
The arduino leonardo is a microcontroller board based on the atmega32u4 (datasheet). It has 20 digital inputoutput pins (of which 7 can be used as pwm outputs and 12 as analog inputs), a 16 mhz crystal oscillator, a micro usb connection, a power jack, an icsp header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a usb cable or power it with a ac-to-dc adapter or battery to get started.The leonardo differs from all preceding boards in that the atmega32u4 has built-in usb communication, eliminating the need for a secondary processor. This allows the leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (cdc) serial & com port. It also has other implications for the behavior of the board; these are detailed on the getting started page. Summary microcontroller : atmega32u4operating voltage: 5vinput voltage (recommended): 7-12vinput voltage (limits) : 6-20vdigital io pins: 20pwm channels: 7analog input channels: 12dc current per io pin: 40 madc current for 3.3v pin: 50 maflash memory: 32 kb (atmega32u4) of which 4 kb used by bootloadersram: 2.5 kb (atmega32u4)eeprom: 1 kb (atmega32u4)clock speed: 16 mhz
View Complete Details
Ask Latest Price & Details
Mini (arduino) Microcontroller Board

Mini (arduino) Microcontroller Board
We are offering mini (arduino) microcontroller board. With the 328.(datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, and a 16 mhz crystal oscillator. It can be programmed with the usb serial adapter or other usb or rs232 to ttl serial adapter. The new mini (revision 05) has a new package for the atmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04.Warning: don't power the arduino mini with more than 9 volts, or plug the power in backwards: you'll probably kill it.
View Complete Details
Ask Latest Price & Details
Microcontroller Boards

Microcontroller Boards
We are offering arduino due.The arduino due is a microcontroller board based on the atmel sam3x8e arm cortex-m3 cpu (datasheet). It is the first arduino board based on a 32-bit arm core microcontroller. It has 54 digital input & output pins (of which 12 can be used as pwm outputs), 12 analog inputs, 4 uarts (hardware serial ports), a 84 mhz clock, an usb otg capable connection, 2 dac (digital to analog), 2 twi, a power jack, an spi header, a jtag header, a reset button and an erase button.Warning: unlike other arduino boards, the arduino due board runs at 3.3v. The maximum voltage that the io pins can tolerate is 3.3v. Providing higher voltages, like 5v to an io pin could damage the board. The board contains everything needed to support the microcontroller, simply connect it to a computer with a micro-usb cable or power it with a ac-to-dc adapter or battery to get started. The due is compatible with all arduino shields that work at 3.3v and are compliant with the 1.0 arduino pinout. The due follows the 1.0 pinout: twi: sda and scl pins that are near to the aref pin.the ioref pin which allows an attached shield with the proper configuration to adapt to the voltage provided by the board. This enables shield compatibility with a 3.3v board like the due and avr-based boards which operate at 5v.an unconnected pin, reserved for future use. the due has a dedicated forum for discussing the board.
View Complete Details
Ask Latest Price & Details
Mega ADK (Arduino) microcontroller board

Mega ADK (Arduino) Microcontroller Board
the arduino mega adk is a microcontroller board based on the atmega2560 (datasheet). it has a usb host interface to connect with android based phones, based on the max3421e ic. it has 54 digital inputoutput pins (of which 15 can be used as pwm outputs), 16 analog inputs, 4 uarts (hardware serial ports), a 16 mhz crystal oscillator, a usb connection, a power jack, an icsp header, and a reset button.
View Complete Details
Ask Latest Price & Details
Arduino Micro Microcontroller Board

Arduino Micro Microcontroller Board
The arduino micro is a microcontroller board based on the atmega32u4 (datasheet), developed in conjunction with adafruit. It has 20 digital inputoutput pins (of which 7 can be used as pwm outputs and 12 as analog inputs), a 16 mhz crystal oscillator, a micro usb connection, an icsp header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro usb cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The micro is similar to the arduino leonardo in that the atmega32u4 has built-in usb communication, eliminating the need for a secondary processor. This allows the micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (cdc) serial com port. It also has other implications for the behavior of the board.
View Complete Details
Ask Latest Price & Details
Arduino Esplora

Arduino Esplora
Arduino Esplora.The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo. The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use set of onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora, check out the Getting Started with Esplora guide. The Esplora has onboard sound and light outputs, and several input sensors, including a joystick, a slider, a temperature sensor, an accelerometer, a microphone, and a light sensor. It also has the potential to expand its capabilities with two Tinkerkit input and output connectors, and a socket for a color TFT LCD screen.Like the Leonardo board, the Esplora uses an Atmega32U4 AVR microcontroller with 16 MHz crystal oscillator and a micro USB connection capable of acting as a USB client device, like a mouse or a keyboard.In the upper left corner of the board there is a reset pushbutton, that you can use to restart the board. There are four status LEDS : ON [green] indicates whether the board is receiving power supplyL [yellow] connected directly to the microcontroller, accessible through pin 13RX and TX [yellow] indicates the data being transmitted or received over the USB communicationThe board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable to get started.
View Complete Details
Ask Latest Price & Details
Fio (arduino) Microcontroller Board

Fio (arduino) Microcontroller Board
We are offering fio (arduino). The arduino fio is a microcontroller board based on the atmega328p (datasheet) runs at 3.3v and 8 mhz. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. It has connections for a lithium polymer battery and includes a charge circuit over usb. An xbee socket is available on the bottom of the board. The arduino fio is intended for wireless applications. The user can upload sketches with an a ftdi cable or sparkfun breakout board. Additionally, by using a modified usb-to-xbee adaptor such as xbee explorer usb, the user can upload sketches wirelessly. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The arduino fio was designed by shigeru kobayashi and sparkfun electronics, and manufactured by sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Pro (arduino) Microcontroller Board

Pro (arduino) Microcontroller Board
We are offering pro (arduino). The arduino pro is a microcontroller board based on the atmega168 (datasheet) or atmega328 (datasheet). The pro comes in both 3.3v 8 mhz and 5v 16 mhz versions. It has 14 digital inputoutput pins (of which 6 can be used as pwm outputs), 6 analog inputs, a battery power jack, a power switch, a reset button, and holes for mounting a power jack, an icsp header, and pin headers. A six pin header can be connected to an ftdi cable or sparkfun breakout board to provide usb power and communication to the board.The arduino pro is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with arduino shields. The 3.3v versions of the pro can be powered with a battery. The arduino pro was designed and manufactured by sparkfun electronics.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Dhrupal Tilava (Tiru Embedded India Pvt. Ltd.)
  • Gokul Nagar Main Road, Street No. 5 Corner, Near Dhara Gas Godown, Gondal Road, Rajkot-360004, Gujarat
  • Share us via
    Linkedin pinterest
  • Call 08068051347 Ext. 537