Ajmer, Rajasthan, India
Our Product / Services
Description
Microwave FlowSwitch, applying the principle of Doppler Effect, is a flow detection sensor for bulk solid/powder applicable to various application like flow monitoring of pneumatic feeding line, plugged chute detecton, etc. High performance in flow and plugged detection for dry powder. Hardly influenced by adhesion or dust because of high permeability microwave system. Self-diagnosis function automatically detecting decrease of sensitivity. Digital circuit system preventing set value from drifting. Withstanding pressure ability up to -980MPa+980MPa internal- pressure in pipe.
Model | MWFS-SW-02C |
Power Source | AC90230V, 50/60Hz |
Detecting Principle | Flow detection by microwave system applying Doppler effect |
Detecting Range | Max. 1.5m (depending on size, speed and reflectivity of target object) |
Frequency | 24GHz band |
Oscillation Power | 7mW |
Output (for control) | 1C Output AC250V 3A (Actuation) Detection: ON at solid flow detection ON DELAY: ON after the setting time OFF DELAY: OFF after the setting time |
Fault Alarm (self-diagnosis) | 1C output AC250V 3A (Actuation) Diagnosis and outputs drop of the transmitted microwave At power off, the contact will be reset |
Timer | 0.110sec (Adjustable) (both ON DELAY and OFF DELAY) |
Power Consumption | Max. 5.5W |
Allowable temp | -1055 |
Allowable Pressure | -980kPa+980kPa |
Mounting | G1 screw (incl. lock-nut and packing) |
Protection | IP65 |
Coating Color | Munsell 7.5GY6/10 |
Mass | Approx. 2.0kg |
Description
This is space-serving type motion sensor which consistsof a transducer to be mounted in the panel and a separated proximity switch to be mounted at the place where detection is conducted. It is possible to conduct speed control in the control room apart from the place where detection is conducted and to conduct collectively a integrated control by mounting side by side transducers from each place where detection is conducted.
Description
Microwave Barrier Switch detects the upper and lower limits of silo, hopper, etc.The microwave system enables non-contact detection and easy maintenance. Further the mounting positions can be easily decided because detection works when the accumulation of material blocks the straight line between transmitter and receiver. Max.detection distance 100m realized. Small detection area dia.25mm of transmitter/receiver enables easy installation. Free voltage model from AC80 to AC240V reliable against unexpected voltage variation and disturbance noise.Exact and stable sensitivity setting can be made easily. Self-diagnosis function automatically detects decrease of sensitivity due to adhesion etc.
