All kind of powder and bulk solids measurable:Proven performances involve the handling of various kinds of materials including carbon black, fine ceramics, slaked lime, coal and limestone.

• Highly Economical: Available cheaper than positive type flowmeter, requires less installation space, in addition to being maintenance-free.
• Ideal for automatic control of flow rates: The time constant is much smaller (about 0.4 sec) compared with the positive type flow meters, Impactline flowmeter is instantaneous type and measures continuously. Target value follow-up and disturbance correction operations are performed rapidly.
• Total-enclosed Construction: Powders and bulk solids flow naturally along the flow guide, so dust generation is prevented, also enable shielding from the atmosphere and purging of inert gases.
• Intrinsically safe & Explosion proof construction: Impactline flowmeter uses a transformer and receiver with intrinsically safe & explosion proof construction.
• Optimum sanitary construction: The parts passing powder and bulk solids are almost entirely free of parts collecting these substances, also can be washed.
• Constant feeding with minimal pulsating flow: This is due to excellent constant feeding. The effect is most conspicuous when using a vibrating feeder or special ball valve in the control unit.
• The flow guide for powder and bulk solids passage is of non-enclosed construction: Powder & bulk solids can be flowed down freely inside the flow guide even when fitting or detaching the transmitter or in case of any inadvertent trouble.
• Applicable in high pressure process: Impact-lines have been installed in processes of max. 40 kg/cm2 pressure.
• Great handling ease: As compared with the positive type flow-meters, Impactline flowmeter is handled most easily It has been progressed further by merit of successive improvements based on our experience of almost 30 years.
• Accuracy maintained with stability: Since the horizontal component of the impact force generated on the sensing plate is sensed, there is no zero point shifting even with powder adhesion on the sensing plate, which is the extremely distinct advantage over the positive type flow-meters. Also, the flow stabilizer that stabilizes the flow of powder & bulk solids falling free from the feeder represents one of our improvements extending over a period of almost 30 years. When working with conditions of poor free-falling, a transmitter is available for securing the accuracy. The process accuracy will be 0.2 ~ 3%.
• Changing the characteristics of powder & bulk solids will not influence the accuracy: Since Impactline is based on the inferential principle, in general, a change in characteristics of powder & bulk solids will bring about a change in the flow rate coefficient and lower the accuracy. For that is also possible to use impact Hi, which enables automatically to compensate the change of the coefficient and to prevent any adverse influence to the accuracy and features a higher level of accuracy (0.5~1%).

All kind of powder and bulk solids measurable:Proven performances involve the handling of various kinds of materials including carbon black, fine ceramics, slaked lime, coal and limestone.

• Highly Economical: Available cheaper than positive type flowmeter, requires less installation space, in addition to being maintenance-free.
• Ideal for automatic control of flow rates: The time constant is much smaller (about 0.4 sec) compared with the positive type flow meters, Impactline flowmeter is instantaneous type and measures continuously. Target value follow-up and disturbance correction operations are performed rapidly.
• Total-enclosed Construction: Powders and bulk solids flow naturally along the flow guide, so dust generation is prevented, also enable shielding from the atmosphere and purging of inert gases.
• Intrinsically safe & Explosion proof construction: Impactline flowmeter uses a transformer and receiver with intrinsically safe & explosion proof construction.
• Optimum sanitary construction: The parts passing powder and bulk solids are almost entirely free of parts collecting these substances, also can be washed.
• Constant feeding with minimal pulsating flow: This is due to excellent constant feeding. The effect is most conspicuous when using a vibrating feeder or special ball valve in the control unit.
• The flow guide for powder and bulk solids passage is of non-enclosed construction: Powder & bulk solids can be flowed down freely inside the flow guide even when fitting or detaching the transmitter or in case of any inadvertent trouble.
• Applicable in high pressure process: Impact-lines have been installed in processes of max. 40 kg/cm2 pressure.
• Great handling ease: As compared with the positive type flow-meters, Impactline flowmeter is handled most easily It has been progressed further by merit of successive improvements based on our experience of almost 30 years.
• Accuracy maintained with stability: Since the horizontal component of the impact force generated on the sensing plate is sensed, there is no zero point shifting even with powder adhesion on the sensing plate, which is the extremely distinct advantage over the positive type flow-meters. Also, the flow stabilizer that stabilizes the flow of powder & bulk solids falling free from the feeder represents one of our improvements extending over a period of almost 30 years. When working with conditions of poor free-falling, a transmitter is available for securing the accuracy. The process accuracy will be 0.2 ~ 3%.
• Changing the characteristics of powder & bulk solids will not influence the accuracy: Since Impactline is based on the inferential principle, in general, a change in characteristics of powder & bulk solids will bring about a change in the flow rate coefficient and lower the accuracy. For that is also possible to use impact Hi, which enables automatically to compensate the change of the coefficient and to prevent any adverse influence to the accuracy and features a higher level of accuracy (0.5~1%).