Our Products
We supply Silica Gel Breather which is largely in demand in the Transformer Industry because they provide an economical and efficient way of keeping a tab over the level the moisture, entering in the Transformer. Silica Gel Breather is made from the finest quality raw material of Blue Silica Gel & Orange Silica Gel to sustain the test of time. They are available in two varieties viz. Clear View Type and Aluminum Type. The Silica Gel Breather, we provide, is up to the capacity of 2000kva. Our quality speaks for itself it has brought our name among some of the finest Silica Gel Breather Supplier and Exporters. Silica Gel Breather are also known as Blue Silica Gel Breather & Orange Silica Gel Breather.
Features :
Breathing Process of Transformer :
Breathing is the process where the transformer Breather-In or Breather our the air from its body due to thermal contraction & expansion of oil mass. When the transformer is loaded or unloaded, the oil temperature inside the transformer tank rises or falls accordingly the air pressure inside the tank changes by either breathing in or breathing out the air. This phenomenon is called "Breathing" of the transformer. Now, the air which is being breathed in contains either dust particles and/or humidity that change the dielectric strength of the oil. For proper functioning of transformer, it is absolutely necessary that dielectric strength of transformer oil remains unimpaired. Hence, it is necessary that, the air entering into the transformer is free from moisture & dust particles.
Function of Silica Gel Breather :
The sole function of Silica Gel Breather is to dehydrate (remove moisture) the air & to remove dust particles of the air breathed in by the transformer.
Operation & Working of Silica Gel Breather :
Silica Gel (Air dehydrating) breathers are transparent hollow cylinder tubes which contain chemically pure silicium salt (Silica Gel) with cobalt indicator. This grade of Silica Gel is called as âindicating gradeâ of Silica Gel.
The indicating grade of Silica Gel, which is filled in the breather, is hard blue crystals, which has considerable absorption power for moisture. Silica Gel absorbs moisture signaling the saturation degree by changing color as follows.
For proper functioning of transformer dehumidification of Silica Gel crystals & removal of dust particles from breathed air is necessary.
Moisture is removed from Silica Gel crystals by heating it inside a ventilated oven at to 150 C, until the color becomes deep blue again.
Dusts particles are filtered by the oil in the oil cup.Pressure value for air passage into the breather are: 0.003 Kg/cm inlet or 0.005 Kg/cm outlet.
Criteria for Selecting Silica Gel Breather :
Keeping in view the above functions of Silica Gel Breather the main criteria for selecting the breather becomes,
Technical Specifications
Clear View Type Silica Gel Breather | Aluminum Body Silica Gel Breather |
Size. (Kg.) | Size. (Kg.) |
0.125 | 0.250 |
0.250 | 0.500 |
0.500 | 0.750 |
0.750 | 1 |
1 | 1.5 |
1.5 | 3 |
2 | 4 |
3 | 5 |
5 | - |
6 | - |
8 | - |
10 | - |
15 | - |
Additional Information:
Packaging Details : 25-KG BAG
Delivery Time : 1-WEEK
Mix Silica Gel is the Mixing of White Silica Gel & Blue Silica Gel. Ration of Mixing can be 30 + 70 or 40 + 60 or 50 + 50 or as per the requirement of the buyer. Mixing of Silica Gel in different mesh size can be done as per the requirement of the buyer. Mix Silica Gel is normally used in where White & Blue Silica Gel is needed to be used. We are also Manufacturing White & Blue Mix Silica Gel Pouch in all the size. It also help in low cost Silica Gel Pouch by using Mix Silica Gel Pouch where you want to use Blue Silica Gel Pouch only.
Applications :
Technical Specifications
Descriptions | Silica Gel White & Blue (Indicating & Non Indicating Silica Gel) |
ASSAY (as SiO2) | 97 -99 % |
pH | 06/07/15 |
Bulk Density | 0.600 - 0.700 gm/cc |
Loss on Drying % | < 6 |
Adsorption Capacity at 100 % humidity | 30 -40 % |
Particle size (Mesh) | 1-2,1-4, 3-4, 3-8, 5-8, 9-16, 16-30 |
Mixing Ration | 20 – 80, 30 -70, 40 – 60, 50 – 50 % |
Chemical Formula | SiO2+H2O+CoCl2 |
Additional Information:
Packaging Details : 25-KG BAG
Delivery Time : 1-WEEK
Additional Information:
Packaging Details : 25-KG BAG
Delivery Time : IMMEDIATE
The Blue Silica Gel (Indicating Type Desiccant Silica Gel) is a semi-transparent glassy substance, containing an indicator as Cobalt Chloride a heavy metal salt. The Granules or beads are dark blue in color when they are free from moisture. As the graduals take up moisture, they turn to light blue gradually, When Dark Blue Silica Gels color of crystal turns from blue to pink, or color less it has absorbed approximately more than 8 % percent of its weight in water making it an easy visual indicator to see whether gel has become saturated with water. It shows whether the gel needs to be replaced or regenerated. The indicating silica gel will still adsorb up to 40% of its weight in water vapor just like the non-indicating. In fact, it is mainly used as indicator for the extent of dehumidification and moisture absorption in sealed vessel and Silica Gel Breather Industry & Transformer Industry. We have an illustrious reputation of delivering high quality Blue Silica Gel. The quality blended with reasonable pricing makes us one of the prominent Blue Silica Gel or Indicating Silica Gel Desiccant Manufacturers and Suppliers. Some times it is also know as Blue to Pink Silica Gel.
Properties :
Uses :
Applicatioons :
Specifications
Descriptions | Silica Gel Blue (Indicating Type Silica Gel) |
---|---|
ASSAY (as SiO2) | 97 -99 % |
pH | 6-7 |
Bulk Density | 0.600 - 0.700 gm/cc |
Loss on Drying % | < 6 |
Adsorption Capacity at 100 % humidity | 30 -40 % |
Friability | 99.5 |
Choloride (as Nacl) | 0.4 ppm |
Sulpates (Na2SO4) | 0.5 ppm |
Amonium (NH3) | NIL |
Cobalt Chloride (CoCl2) | 0.5 % |
Particle size (Mesh) | 1-2,1-4, 3-4, 3-8, 5-8, 9-16, 16-30 |
Chemical Formula | SiO2+H2O+CoCl2 |
Blue Silica Gel Size
Size in Mesh | Size in mm |
---|---|
1 -2 | 9 -12 |
1 -4 | 6 -12 |
3 - 4 | 6 - 8 |
3 - 6 | 4 - 6 |
3 - 8 | 3 - 8 |
5 - 8 | 3 - 5 |
9 - 16 | 2 -4 |
16 -30 | 1 -2 |
30 -40 | 0 -1 |
Powder | Less than 0 |
Column Chromatography Silica Gel is one of the highly acclaimed techniques for separation as well as analysis of various complex organic mixtures. Today, we stand among the major manufacturers of Column Chromatography Silica Gel. To meet the different needs of the clients, we offer Column Chromatography Silica Gel in various particle sizes for pilot plant or other plant applications.
Mesh sizes available :
Applications :
Technical Specifications
Descriptions | Silica Gel Column Chromatography |
---|---|
Assay (as SiO2) | 98.00% |
pH | 6.8 - 7.2 |
Bulk Density | 0.450 – 0.550 gm/ltr |
Loss on Drying % | 5.00% |
Friability | 99.5 |
Chloride (as Nacl) | Max. 0.01% |
Sulfates (Na2SO4) | Max 0.01% |
Particle size | 60- 120, 100-200, 230-400 |
We offer Milky White Silica Gel (Milky Silica Gel) that is also reckoned as Milky Silica Gel or Non-Transparent Silica Gel. Milky White Silica Gel is widely used for the determination of molecular weight of high polymers. Processed under the guidance of experts, our Milky White Silica Gel is known for purity and highly effective nature. It is widely used as a catalyst.
Technical Specifications
Descriptions | Milky White Silica Gel (Non Transparent Desiccant Silica Gel) |
ASSAY (as SiO2) | 97 -99 % |
pH | 2-7 |
Bulk Density | 0.500 - 0.700 gm/cc |
Loss on Drying % | < 6 |
Adsorption Capacity at 100 % humidity | 30 -45 % |
Friability | 99.5 |
Choloride (as Nacl) | 0.5 ppm |
Sulpates (Na2SO4) | 0.5 ppm |
Amonium (NH3) | 0.5 ppm |
Particle size (Mesh) | 2 – 12 mm |
Chemical Formula | SiO2+H2O |
We are also Manufacturing A-type Silica Gel that is also known as Fine Pore Silica Gel. Our A-Type Silica Gel contains fine pores & has large internal surface area. Having high moisture-absorbing capacity at low humidity, our A-Type Silica Gel is used as a desiccant for storing food and metal parts. Type A Silica Gel that we supply simply adsorbs water vapor in the atmosphere in a normal humidity range.
Application :
Drying & moisture proof, it can also be used as catalyst carrier, adsorbent, separator and variable-pressure adsorbent, etc.
Features :
Specifications
Item | Specification | |||
Spherical | Irregular | |||
Absorption Capacity | RH=20% | Min. 8.0 | Min. 8.0 | |
RH=50% | Min. 20.0 | Min. 20.0 | ||
RH=90% | Min. 30.0 | Min. 30.0 | ||
Moisture | 2.0% | 5.0% | ||
pH Value | 4.8 | 6 – 7 | ||
SiO2 % | 98% | 98% | ||
Qualified ratio of particle | 90% | 90% | ||
Bulk Density | 700g/L | 700g/L | ||
Partical Size | 2 – 5, 3 – 5 | 4 – 8, 4 – 6, 6 – 10 mm |
B-Type Silica Gel Contains large pores, having a very high capacity at very high humidity and is used for moisture control also. Type B adsorbs water vapor at very high humidity and releases it at very low humidity.
Application :
In Air Dryer, Dehumidifier, liquid absorbent, drier and perfume carrier, also as catalyst carriers, silica sands, etc.
Features :
Technical Specifications
Item | Spherical | Irregular | |
Absorption Capacity | RH=20% | Min. 8.0 | Min. 8.0 |
RH=50% | Min. 20.0 | Min. 20.0 | |
RH=90% | Min. 30.0 | Min. 30.0 | |
Moisture | 2.0% | 5.0% | |
pH Value | 4.8 | 6 – 7 | |
SiO2 % | 98% | 98% | |
Qualified Ratio of Particle | 90% | 90% | |
Bulk Density | 500-600g/L | 500-600g/L | |
Partical Size | 2 – 5, 3 – 5 | 4 – 8, 4 – 6, 6 – 10 mm |
C-Type Silica Gel is also known as macro-pored a SILICA GEL available in Spherical/Beads and Irregular/Crystal shape.
Features :
Application :
Technical Specifications
Item | Spherical | Irregular |
Absorption Capacity | Min. 0.85mL/g | Min. 0.76mL/g |
Moisture | Max. 5.0% | Max. 5.0% |
Attrition | Max. 4% | Max. 10% |
Qualified Ratio of Particle | Min. 94% | Min. 90% |
Bulk Density | Min. 400g/L | Min. 400g/L |
Partical Size | 2 – 5, 3 – 5 | 4 – 8, 4 – 6, 6 – 10 mm |
Additional Information:
Packaging Details : BOX
Delivery Time : 4-WEEKS
White Silica Gel (Non-Indicating Type Silica Gel Desiccant) is a type, where most of the particles of Silica Gel are not impregnated with Indicating Agents and when particles get free from moisture, it goes transparent white. In other words, it turns into milky or hazy white when it is out to use, because it catches moisture when exposed to environment. Since, we have been delivering high quality White Color Silica Gel; we have earned a very good name among the leading Non-Indicating Type White Silica Gel Manufacturers, Exporters and Suppliers. As we take regular feedback from our customers for quality & delivery, we have been consistently improving the quality of White Desiccant Silica Gel or Non-Indicating Type Silica Gel.
Used as :
Properties :
Specifications
Descriptions |
Silica Gel White (Non-Indicating Type Desiccant Silica Gel) |
ASSAY (as SiO2) |
97 -99 % |
pH |
6-7 |
Bulk Density |
0.600 - 0.700 gm/cc |
Loss on Drying % |
< 6 |
Adsorption Capacity at 100 % humidity |
30 -40 % |
Friability |
99.5 |
Choloride (as Nacl) |
0.05 ppm |
Sulpates (Na2SO4) |
0.5 ppm |
Amonium (NH3) |
NIL |
Particle size (Mesh) |
1-2,3-4, 3-8, 5-8, 9-16, 16-30 |
Chemical Formula |
SiO2+H2O |
White Silica Gel Size
Size in Mesh | Size in mm |
---|---|
1 - 2 | 9 - 12 |
1 - 4 | 6 - 8 |
3 - 4 | 6 -8 |
3- 8 | 4 - 8 |
5 - 8 | 4 - 6 |
9 - 16 | 2 - 4 |
16 - 30 | 1 - 2 |
30 - 40 | 0 - 1 |
Powder | Less than 0 |
Additional Information:
Delivery Time : 4-WEEKS