Post Buy Requirement

TRADE HUB Delhi

GST : 07FIWPS9723M1ZY

Verified Add Review

Call 08068659135 Ext. 161

Welcome to TRADE HUB

TRADE HUB is spe-cialized in designing, manufacturing and selling all kinds of RF connectors, Cable Assembly and antennas. Our main products are RF Connectors, Cable Assembly and ntennas.Connectors include RF Connectors (with pecifications of SMA, SMB, SMC, SSMA, SSMB, SMC, SMZ, 7/16, MMCX, MCX, TNC, F, BNC and N).Cable assembly includes interface cables (with U.FL, H.FL, IPEX, SMA, SMB, MCX, N and MMCX onnectors).Antennas include GPS antennas, WiFi antennas, GSM antennas, DVB-T antennas and GPS/GSM combination antennas.

Sr. MANAGER

SHREYAM
Year of Establishment

2019
Primary Business

Manufacturer
Annual Turnover

Rs. 0.5 to 2.5 Crore Approx.

Our Product Range

SMA MALE TO SMA MALE DC 18 GHZ LOW LOSS CABLE ASSEMBLY

3,000 - 18,000 / piece
- MOQ 1 NOS
- MaterialSteel,SS
- Upper MaterialStainless Steel
- Inner MaterialCopper
- ShapeRound
- ColorBlack,Blue,BLUE & BLACK
- Power18 GHZ
- ApplicationRADIO FREQUENCY TELECOMMUNICATION
- CertificationISO 9001:2008
- FeatureDurable,High Ductility,Quality Assured
- VoltageNA
- TypeRf Cable Assembly
- Thickness4.5-5mm,5.5-6mm
- Country of OriginIndia
- DATA SHEETWITH PRODUCT
AS26S Ultra Flexible Test Cable Assembly AS26S (DC-26.5GHz), millimeter wave ultra flexible test cable assembly, has three-layer shield and stable performance, such as low loss and stable phase. It’s an ideal product applied in components, assembly workshop, lab test and automation equipment. Physical Characteristics Specification mm inch Center Contact 1.02 0.040 Dielectric 3.07 0.121 Inner Shield 3.27 0.129 Middle Shield 3.47 0.137 Outer Shield 3.80 0.150 Jacket 5.20 0.205 Weight 0.065 kg/m Min Bending Radius ( dynamic 52.0mm)，(Static 25.0mm) Durability ＞5000 Working Temp. -55℃～+85℃ Electrical Characteristics VSWR Max 6GHz 18GHz 26.5G Hz SMA, 3.5mm 1.15:1 1.20:1 1.25:1 SMA 1.15:1 1.25:1 1.30:1 N 1.15:1 1.25/1.30 - Impedance 50 ohms Velocity 76% Screening Effectiveness ＞90 dB Bending Amplitude Stability ≤±0.03dB@26.5GHz Bending Phase Stability ≤±2.7°@26.5GHz Attenuation (25℃) Frequency (MHz) dB/100ft dB/100m 1000 10.7 35 3000 20.7 68 6000 28.7 94 10000 42.4 139 12000 45.1 148 18000 53.6 176 26500 68.6 225 Power handling@25℃&Sea Level(cable only) Frequency (MHz) Watts 1000 149 3000 85 6000 55 10000 41 12000 37 18000 29 26500 23
...more
Get Latest Price View Details
Log Periodic Dipole Antenna

45,000 - 1.45 Lakh / piece
- MOQ 1 NOS
- Brand NameANOKHA SANGAM,ANOKHA SANGAM
- MaterialALUMINIUM,ALUMINIUM
- Surface FinishingPolished
- ShapeLPDA
- ColorGray,GREY
- UsageIndustrial Use, Wireless Communication, Radio
- Size2-4 Feet, 4-6 Feet, 6-8 Feet, 8-10 Feet, 10-12 Feet, 5-15 Inches, 15-30 Inches, 30-45 Inches
- Length0-15mm, 15-30mm, 30-45mm, 45-55mm
- Capacity0.5 Ton, 1 Ton
- Packaging TypeBox
- HardnessNA
- Outer DiameterNA
- Mounting TypePIPE MOUNTED
- Packaging Size1 PCS SET
- SpecialitiesWaterproof, Rust Proof
- Antenna TypeVHF / UHF
- TypeLOG PERIODIC ANTENNA,LOG PERIODIC ANTENNA
- Thickness5-10mm, 10-15mm, 15-20mm, 20-25mm
- Frequency5-10Ghz, 10-15Ghz, 15-20Ghz, 20-25Ghz, 25-30Ghz, 20-1000 MHZ
- Impedance50 Ohm
- Warranty12 MONTHS
- AccuracyNA
- Bandwidth10 MHZ
- Country of OriginIndia,India
- Gain6 Db
- GSM500MHz
- Inner DiameterNA
- PolarizationVertical
- ConnectivityWired
- Corrosion ResistanceYes
- Rust ProofYes
- CetificationsISO 9001:2008
DESIGN FEATURES: The AS-LPDA100-500 log periodic dipole antenna uses 6063T6 ultra corrosion resistant architectural anodized aluminium alloy and designed to provide wideband directional radio signals from 100 to 500 MHz frequency band. The extra spacers are used between the support booms to improve mechanical durability of antenna. The mounting arrangement of log periodic antenna permits to change the polarization from horizontal to vertical and vice-versa. This log periodic dipole antenna system is particular suitable for Tx, Rx, monitoring, signal intelligence and jamming application. This high gain LPA provides strong performance over the entire frequency of 100-500 MHz as the LPDA does not use loading technique to reduce the overall size of array. The antenna can be assembled with just one spanner within 5 minutes. The coaxial cable is passed thru support boom and came out at the rear end of antenna. CONSTRUCTIONS: The AS-LPDA100-500 assembled log periodic ant. outer-most dimensions are 1.5 meters (5 feet) long and 1.5 meters (5 feet) wide. The antenna has foldable elements, the longest of which is 0.75 meter. All elements are supplied in two segments for easy of shipping and handling. The elements are attached via a stainless steel stud at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. The complete LP antenna is supplied with epoxy base paint finish to protect it further from severe environmental condition. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel. ELECTRICAL SPECIFICATIONS: Frequency Range 100 - 500 MHz. Gain 9 dBi. Bandwidth Entire Band Polarization Vertical or Horizontal Input Impedance 50 Ohms Radiation Pattern Directional Horizontal Beam width –Half Power Points 60 Degrees Front to Back Ratio 18 dB. VSWR – Better Than 2.2:1 RF Power Handling Capacity 400 Watts @500MHz Input Termination N-Female Lightning Protection Direct Ground MECHANICAL SPECIFICATIONS: Support Booms & Radiating Elements Materials 6063T6 Aluminium Alloy Mounting Hardware -Materials Marine Grade Stainless Steel Gross Weight 6 Kgs. Wind Rating 200 Km/hr. Overall Length 1.5 Meters Overall Width 1.5 Meters Shipping Length 1.55 Meters Support Boom – Materials - Cross Section Aluminium – Square Tube – 25.4mm Elements – Materials - Cross Section Aluminium - Round Tube – 19mm Insulator Materials Teflon & Nylon Maximum Mount Pipe Diameter 38-77 mm (1.5 to 3 Inches) ENVIRONMENTAL SPECIFICATIONS: Operating Temperature (-) 30 to +70 Degrees Celsius Storage Temperature (-) 40 to +80 Degrees Celsius Humidity 0 to 95% RH
...more
Get Latest Price View Details
36 FEET ALUMINIUM TUBULAR ANTENNA MAST

19,500 - 25,500 / SET
- MOQ 1 NOS
- Size36 FEET
- Model NumberTH-36FEETMAST
- Brand NameANOKHA SANGAM,ANOKHA SANGAM
- MaterialALUMINIUM
- ShapeROUND PIPE
- ApplicationTELECOMMUNICATION. TELECOM PRODUCT
- Weight30 KG
- Shelf Life5 YEARS
- GradeALUMINIUM
- ColorMilitary Grade,Military Grade
- GenderNA
- Feature36 FEET TUBULAR MAST
- ConditionNEW
- Industrial UseYES
- CustomizationYES
- Lead Time1-2 WEEKS
- Place of OriginINDIA
- ColourMilitary Grade
- BrandANOKHA SANGAM
- Type36 FEET TUBULAR ALUMINIUM ANTENNA MAST
- Warranty12 MONTHS
- Country of OriginIndia
Product Specification Antenna/Tower Height 36 feet (11 mtr) Country of Origin Made in India Material Aluminum Pipe OD 60 mm Weight 20 kg Wind Speed 40 mtr / sec Product Type Tubular Antenna Mast with Accessories Set Contains Rope, Hammer, Mount, Bracket, Bolt, Base etc Minimum Order Quantity 1 Set Product Description Technical Specifications 36 feet Aluminum tubular mast consists of 6 section, each made of 2” Aluminum pipes of 6 feet long of minimum 2 mm wall thickness The section at one end should be dying pressed minimum 6 inches, so that it couples to the other corresponding section properly, Coupling pipe of 12" 2.5mm wall thik For AE mast sections . = (Qty 5) One base plate galvanized of size, 1.57 x 1.5ft x 5mm with holding pipe and 4 ground pegs of 10 inches and 16mm duly galvanized to be provided for fixing it to the ground Three pes of anchors 38x38x5mm thick of 24 inch long with hole for guy rope fitting to be provided Two sets of PVC ropes (3 guys peg set) to be provided at 30ft and 50ft & one 60 ft PVC rope (Total 300 ft) with suitable rope tightens and thimbles. two heavy duty canvases carry bag to be provided for carrying accessories. 1.5kg Hammer 1 pc., Middle guy plate 1pes, Top guy plate 1 pes, patti =6 , nut Bolt with washer 3", for coupling of mast Sections. (Qty 21) Additional Information Item Code 73089070 Delivery Time 1 weeks Production Capacity 50 Mast Ready Stock Packaging Details 36 feet Tubular Mast with accessories Technical Specifications 36 feet Aluminiam tubular mast consists of 6 section/ each made of 2” Aluminiam pipes of 6 feet long of minimum 2 mm wall thickness The section at one end should be dying pressed minimum 6 inches/ so that it couples to the other corresponding section properly/ Coupling pipe of 12" 2.5mm wall thik For AE mast sections . = (Qty 5) One base plate galvanized of size/ 1.57 x 1.5ft x 5mm with holding pipe and 4 ground pegs of 10 inches and 16mm duly galvanized to be provided for fixing it to the ground Three pes of anchors 38x38x5mm thick of 24 inch long with hole for guy rope fitting to be provided Two sets of pvc ropes (3 guys peg set) to be provided at 30ft and 50ft & one 60 ft pvc rope (Total 300 ft) with suitable rope tightens and thimbles. two heavy duty canvases carry bag to be provided for carrying accessories. 1.5kg Hammer 1 pc./ Middle guy plate 1pes/ Top guy plate 1 pes/ patti =6 /nut Bolt with washer 3"/ for coupling of mast Sections. (Qty 21)
...more
Get Latest Price View Details