Palghar, Maharashtra, India
Verified
Add Review
Our Products
Tube Tech produces Copper tube assemblies, Brass Tube Assemblies & Cupro Nickel Tube Assemblies that require various bending operations, machining operations, welding operations, brazing operations, captive components or a combination of all above items. We also assemble tubes with flanges, bushes and other components as per the requirements specified by the Customer that make them more complete and ready to use by our Customers.
All the fabricated Copper tube assemblies, Brass Tube Assemblies & Cupro Nickel Tube Assemblies are regularly checked & inspected at various stages on suitable fixtures & gauges specifically designed and fabricated for that particular requirements to check their compliance with the required tolerance range. This process ensures that only those fabricated tube assemblies who confirm to the required tolerance range are shipped to the Customer which ensures a hassle free installation at Customer’s end.
Our facilities are capable of fabricating from simple fluid lines to complex welded & brazed machined components with tight tolerances for specific requirements of our Customers. Non Ferrous Metal Tube Assemblies & Non Ferrous Metal Tube connections manufactured by Tube Tech help our Customers improve and simplify their manufacturing processes and also help them lower cost and improve bottom line to a greater degree than traditional outsourcing.
Tube Tech produces Tube Assemblies with following Tube materials :
Product Details :
Tube Tech specializes in manufacture of bearing oil coolers. Our immersion coolers provide long-term cooling solutions with uniform oil cooling directly within the oil reservoir. Coolers are supplied for new generators and motors and also to upgrade cooling performance in existing equipment.
Through years of hands-on experience and the development Tube Tech has been able to establish itself as a market leader in the design and manufacture of bearing coolers. Whether the heat exchange needs to be forced or natural convection, through single or double tube arranged to fit the Customer’s specific geometrical requirements, Tube Tech holds profound understanding of the heat transfer mechanisms insuring adequate sizing and efficient cooling.
Tube Tech offers broad range of materials in different sizes to choose from to satisfy any cooling water conditions and to suit Customer’s specific requirements.
From Mumbai (Maharashtra), we are the Non Ferrous Metal Tube Connector Manufacturer, Exporter and Supplier, worthy a notice. By employing our innovative techniques and equipments we provide cost effective Non Ferrous Metal Tube Connectors in the configurations matching the client’s exact requirements. After stringent quality testing, the flawless Connectors are doled out across the world at economical prices.
More About Non Ferrous Metal Tube Connector :
Tube Tech’s abilities go well beyond tube fabrication. With a focus on providing a complete solution to our esteemed customers for all their piping requirements Tube Tech delivers an extensive range of small and medium diameter tube bending and complex Copper Tube Assemblies, Brass Tube Assemblies, Cupro Nickel Tube Assemblies suitable for air-conditioning, refrigeration, piping, automotive industry, ship building industry and many other industrial & commercial applications.
We produce Copper tube assemblies, Brass Tube Assemblies & Cupro Nickel Tube Assemblies that require various bending operations, machining operations, welding operations, brazing operations, captive components or a combination of all above items. We also assemble tubes with flanges, bushes and other components as per the requirements specified by the Customer that make them more complete and ready to use by our Customers.
All the fabricated Copper tube assemblies, Brass Tube Assemblies & Cupro Nickel Tube Assemblies are regularly checked & inspected at various stages on suitable fixtures & gauges specifically designed and fabricated for that particular requirements to check their compliance with the required tolerance range. This process ensures that only those fabricated tube assemblies who confirm to the required tolerance range are shipped to the Customer which ensures a hassle free installation at Customer’s end.
Our facilities are capable of fabricating from simple fluid lines to complex welded & brazed machined components with tight tolerances for specific requirements of our Customers. Non Ferrous Metal Tube Assemblies & Non Ferrous Metal Tube connections manufactured by Tube Tech help our Customers improve and simplify their manufacturing processes and also help them lower cost and improve bottom line to a greater degree than traditional outsourcing.
Tube Tech produces Tube Assemblies with following Tube materials :
Details :
We offer wide range of Copper Pipe Fittings which provide an economic and efficient method of changing directions in a wide spectrum of domestic and commercial applications ranging from air conditioning, refrigeration, heating, fluid distribution, air pressure lines and plumbing etc. Our fittings have no rough surfaces, present a neat appearance, heat more rapidly and provide better flexibility to the installer to install and join the copper tube at appropriate place. We manufacture copper fittings in a variety of standard sizes between 6.00mm and 42.00mm. The sizes are measured inside diameter (I.D). The most commonly used copper fittings manufactured by Tube Tech are grouped as under.
It may be a reducing Tee when one end of the section is of smaller diameter that means unlike a standard Tee the reducing Tee do not have equally sized parts.
It may be a cross Tee when it is used to connect four tubes or a threaded Tee when the vertical section of it has female threads.
Tube Tech offers Piping Systems for the Shipbuilding industry, Offshore - Oil & Gas and other industries. We supply demanding high quality products made of a wide variety of tube materials like Copper, Copper-Nickel, carbon steel, stainless steel based on modern production technologies. Tube Tech produces piping systems and components that require various bending operations, machining operations, welding operations, brazing operations, captive components or a combination of all above items. We also assemble tubes with flanges, bushes and other components as per the requirements specified by the Customer that make them more complete and ready to use by our Customers.
Our facilities are capable of fabricating from simple fluid lines to complex welded & brazed machined components with tight tolerances for specific requirements of our Customers. Non Ferrous Metal Tube Assemblies & Non Ferrous Metal Tube connections manufactured by Tube Tech help our Customers improve and simplify their manufacturing processes and also help them lower cost and improve bottom line to a greater degree than traditional outsourcing.
Product Details :
Tube Tech is well equipped to manufacture integral finned U - Bent tubes, fabricated according to various heat exchanger standards or to customer's own specifications. We generally produce Finned U Bent Tubes in outer diameters 15.9 mm & 19.05 mm with wall thickness 1.32 mm and above. However, bigger sizes can also be accommodated on request. Bending radius of 1.25 X Diameter and above can be achieved on these integrally finned tubes. The Bend portion is left unfinned during finning operation to accommodate bending operation. The Finned U Tubes are produced, controlled and measured in accordance with SB 395 & TEMA standards.
We are capable of producing Finned U Bent Tubes in the Leg Length of up to 5 mtrs. These Finned U Tubes are hydro tested after fabrication against any surface defects / leakages. We have in house stress relieving facility and these tubes can be heat treated for stress relieving, if required by the Customer. All tubes are cut to the specified leg lenght, ends deburred and the bores are internally cleaned with dried air before final inspection & packing. Each bundle is protected with plastic sheets. Detailed packing lists are attached to boxes to give quick and clear identification of contents.
Specification Table
|
Tube Dia |
Wall Thickness |
No Of Ridges |
Helix Angle (0) |
Ridge Height |
Inside Surface Area (m2/m |
|
12.7 mm |
0.8 mm |
50 |
18 |
0.25 mm |
0.035 |
|
12.7 mm |
0.8 mm |
60 |
18 |
0.25 mm |
0.037 |
|
12.7 mm |
0.8 mm |
75 |
18 |
0.25 mm |
0.038 |
|
15.9 mm |
0.8 mm |
50 |
25 |
0.25 mm |
0.044 |
|
15.9 mm |
0.8 mm |
60 |
25 |
0.25 mm |
0.046 |
|
15.9 mm |
0.8 mm |
75 |
25 |
0.25 mm |
0.047 |
Tube-Tech manufactures finned Cooling coils in various forms and shapes for direct applications in different types of heat exchangers. These cooling coils are manufactured mainly from Copper Tubes, Cupro Nickel Tubes and Stainless Steel Tube materials. Medium and High Fin Tubes are produced in Fin Density of 11 Fins per inch and Fin Depth of 2.5 mm and above in straight lengths. These finned tubes are then formed in the required shape generally helical to suit the Customer’s specific requirements. We also customize these cooling coils in our in house design facility as per the Customer’s requirements for different applications. These cooling coils exhibit high thermal conductivity and are compact in design and thus save cost and assembling space.
These Finned Cooling Coils are available in 15.9 mm & 19.05 mm base tube diameter. These Finned Cooling Coils are available in single layer wound OR double-layer wound as per the requirement.
The bimetallic tube is composed of two different materials - usually inner material is a corrosion resistant alloy (copper, aluminium brass or Cupro nickel) whereas the outer material is a high-stress resistant alloy (Brass, stainless steel or carbon steel). It is, however, possible to manufacture bimetallic tubes with any material combination as per the requirement & availability. In applications with high pressures and corrosive conditions, bimetallic tube permits large economical savings in comparison with a tube made of a single alloy, since the use of precious materials is reduced to the minimum.
Bimetal tubes combine the positive properties of different materials for use in various media. Bimetal tubes are a safe and economical solution for heat transfer in aggressive media since expensive, corrosion-resistant materials can be combined with less expensive ones. We manufacture these tubes through the rolling & drawing process which gives flawless cladding between two different metal tubes.
In order to increase the area of the tube for better heat transfer, helical fins can be formed on outer tubes surface, if required. Fin density of 11 FPI to 26 FPI can be accommodated, depending upon the Customer’s specific requirement.
Product Features:
Tube Tech offers custom tube bending and pipe bending services to meet your specifications. With the latest tube bending technology we can bend up to 3" Outer diameter tubes in Copper, Brass, Cupro Nickel, Stainless Steel & Carbon Steel Tube materials. Tube Fabrication services including end-forming and welding are also available.
This alloy has very high erosion and corrosion resistance. It has very high weld ability, easy for installation and high antifouling properties against sea microorganisms. Relatively high iron content provides better impingement attack resistance. The alloy is unique to stress corrosion cracking. This form of copper alloy gives the best service life under the most adverse conditions.
Turbo Chill Tubes is an integral low fin tube provided with spiral ridges on the inside. In a Turbo Chill Tube, the inside fluid heat transfer capability is remarkably improved in comparison with the smooth in-tube type tubes. By the effects multiplied mutually by the tubes outside fins and inside spiral ridges a high coefficient for overall heat transfer is obtained. These parameters significantly contribute to the reduction in size of various freezing machines. Normally, Turbo Chill Tubes are generally supplied with 8 & 10 starts configuration; however, it can also be fabricated with other number of starts on request. These tubes are fabricated in alloy C 12200 to meet the chemical, mechanical and other test parameters of ASTM B 75 / B 359 and in alloy 70600 to meet the chemical, mechanical and other test parameters of ASTM B 111 / B 359. BS EN, JIS and DIN standards are also available on request.
End Applications : Refrigeration, Chemical, Petrochemical, LNG, Boiler Applications etc.
Technical Specifications
| Tube Dia | Wall Thickness | Fin Density | Fin Dia | Fin Depth | Root Dia | Wall Thickness under Fins |
|---|---|---|---|---|---|---|
| 19.05 mm | 1.83 mm | 19 / 26 / 40 | 18.80 mm | 1.52 mm | 15.76 mm | 1.20 mm |
| 19.05 mm | 1.65 mm | 19 / 26 / 40 | 18.80 mm | 1.50 mm | 15.80 mm | 1.90 mm |
| 19.05 mm | 1.47 mm | 19 / 26 / 40 | 18.80 mm | 1.42 mm | 15.96 mm | 0.71 mm |
| 19.05 mm | 1.32 mm | 19 / 26 / 40 | 18.80 mm | 1.24 mm | 16.32 mm | 0.59 mm |
| 19.05 mm | 1.18 mm | 19 / 26 / 40 | 18.80 mm | 0.83 mm | 17.14 mm | 0.55 mm |
| 15.87 mm | 1.47 mm | 19 / 26 / 40 | 15.70 mm | 1.42 mm | 12.86 mm | 0.71 mm |
| 15.87 mm | 1.32 mm | 19 / 26 / 40 | 15.70 mm | 1.24 mm | 13.22 mm | 0.59 mm |
Brass Tubes is an alloy of copper with main alloying element as Zinc. Strength, hardness, ductility, good corrosion resistance, machinability, formability and conductivity are the main characteristics of the brass tubes coupled with toughness retained above and below ambient temperature, good spark resistance and low magnetic permeability.
Dimensional Range
End Applications : Heat Exchangers, radiator, generator, decorative furniture etc.
Tube-Tech offers custom engineered Brass Rivets for electricals applications and transmission applications. We also offer various end forming services including- beading, expanding, swaging, flaring, threading and more… Tube-Tech is a leader in tube end forming services.
Equipped with the latest pipe and tube forming machinery and technology
along with an experienced team, we are able to ensure our customers quality products, competitive pricing, on-time shipping, and great customer service.
Brass rivets are available in outer diameters 3 mm and above and wall thicknesses 0.2 mm and above. In addition, we can manufacture tubes with end forming on outer diameters 4 mm to 75 mm in Copper, Brass and Cupro Nickel tube material.Tube Tech offers the following cutting, tube end-forming, and custom tube fabrication services for its elite Customers:
• High-Speed Cutting
• Pipe & Tube End-Forming: Beading, Reducing, Expanding, Flaring, Swaging, & Threading
• Fabrication: Welding, Notching, Punching, Coping, and Drilling
• Finishing: Anodizing, Polishing, and Powder Coating
Tube Tech produces a range of precision brass sleeves to cater the specific requirements of our Customers. Sleeves are available in outer diameters from 6 mm to 40 mm with wall thickness 0.3 mm and above. Customized as per the given specification by the Customer, these sleeves are appreciated for their excellent quality
and performance. These sleeves can also be supplied with tin or nickel plating depending upon the requirement. The main features of these sleeves are:
Dimensionally accurate - Precision engineered
Available in different sizes as per the requirements
Wear resistant
Able to withstand high temperatures
Resistance to corrosion and abrasion
Apart from the sizes mentioned above, our facilities are geared to replicate the entire range of tabular sleeves Copper and Brass.
Tube Tech offers Piping Systems for the Shipbuilding industry, Offshore - Oil & Gas and other industries. We supply demanding high quality products made of a wide variety of tube materials like Copper, Copper-Nickel, carbon steel, stainless steel based on modern production technologies. Tube Tech produces piping systems and components that require various bending operations, machining operations, welding operations, brazing operations, captive components or a combination of all above items. We also assemble tubes with flanges, bushes and other components as per the requirements specified by the Customer that make them more complete and ready to use by our Customers.
Our facilities are capable of fabricating from simple fluid lines to complex welded & brazed machined components with tight tolerances for specific requirements of our Customers. Non Ferrous Metal Tube Assemblies & Non Ferrous Metal Tube connections manufactured by Tube Tech help our Customers improve and simplify their manufacturing processes and also help them lower cost and improve bottom line to a greater degree than traditional outsourcing.
Product Details :
Tube Tech offers Piping Systems for the Shipbuilding industry, Offshore - Oil & Gas and other industries. We supply demanding high quality products made of a wide variety of tube materials like Copper, Copper-Nickel, carbon steel, stainless steel based on modern production technologies. Tube Tech produces piping systems and components that require various bending operations, machining operations, welding operations, brazing operations, captive components or a combination of all above items. We also assemble tubes with flanges, bushes and other components as per the requirements specified by the Customer that make them more complete and ready to use by our Customers.
Our facilities are capable of fabricating from simple fluid lines to complex welded & brazed machined components with tight tolerances for specific requirements of our Customers. Non Ferrous Metal Tube Assemblies & Non Ferrous Metal Tube connections manufactured by Tube Tech help our Customers improve and simplify their manufacturing processes and also help them lower cost and improve bottom line to a greater degree than traditional outsourcing.
Product Details :
