Our Products
Our product range contains a wide range of U Bend Finned Tube and Pipe Bends
Tube Tech is well equipped to manufacture integral finned U - Bent tubes, fabricated according to various heat exchanger standards or to customer's own specifications. We generally produce Finned U Bent Tubes in outer diameters 15.9 mm & 19.05 mm with wall thickness 1.32 mm and above. However, bigger sizes can also be accommodated on request. Bending radius of 1.25 X Diameter and above can be achieved on these integrally finned tubes. The Bend portion is left unfinned during finning operation to accommodate bending operation. The Finned U Tubes are produced, controlled and measured in accordance with SB 395 & TEMA standards.
We are capable of producing Finned U Bent Tubes in the Leg Length of up to 5 mtrs. These Finned U Tubes are hydro tested after fabrication against any surface defects / leakages. We have in house stress relieving facility and these tubes can be heat treated for stress relieving, if required by the Customer. All tubes are cut to the specified leg lenght, ends deburred and the bores are internally cleaned with dried air before final inspection & packing. Each bundle is protected with plastic sheets. Detailed packing lists are attached to boxes to give quick and clear identification of contents.
Specification Table
|
Tube Dia |
Wall Thickness |
No Of Ridges |
Helix Angle (0) |
Ridge Height |
Inside Surface Area (m2/m |
|
12.7 mm |
0.8 mm |
50 |
18 |
0.25 mm |
0.035 |
|
12.7 mm |
0.8 mm |
60 |
18 |
0.25 mm |
0.037 |
|
12.7 mm |
0.8 mm |
75 |
18 |
0.25 mm |
0.038 |
|
15.9 mm |
0.8 mm |
50 |
25 |
0.25 mm |
0.044 |
|
15.9 mm |
0.8 mm |
60 |
25 |
0.25 mm |
0.046 |
|
15.9 mm |
0.8 mm |
75 |
25 |
0.25 mm |
0.047 |
Tube Tech offers custom tube bending and pipe bending services to meet your specifications. With the latest tube bending technology we can bend up to 3" Outer diameter tubes in Copper, Brass, Cupro Nickel, Stainless Steel & Carbon Steel Tube materials. Tube Fabrication services including end-forming and welding are also available.
This alloy has very high erosion and corrosion resistance. It has very high weld ability, easy for installation and high antifouling properties against sea microorganisms. Relatively high iron content provides better impingement attack resistance. The alloy is unique to stress corrosion cracking. This form of copper alloy gives the best service life under the most adverse conditions.
Mr. Ajit Dubey (Tube Tech Copper & Alloys Pvt. Ltd.)
37, Dandekar Industrial Estate, Old Satpati Road,, Palghar, Maharashtra - 401404
https://www.indiancopper.net
Share us via
