Sockets #30563

Hex Adaptors are used for tightening of socket cap screws and bolts. These are available in standard length and extra length. These are formed from solid steel bars. Available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives to cover across flat sizes ranging from 3 mm to 36 mm and 1/8" to 1.1/8" sizes. Range of sizes are available in various square drives. We can also provide sockets for any non standard square drive size / nut size.

We Offer Impact Hex Socket (6 Point) is designed for pneumatic/electric impact wrenches and nut runners. Impact Hex Socket (6 Point) is equipped with single hex broaching which is provided for good grip on nuts & bolts to avoid tools slipping during high speed tightening operations. Also, Impact Hex Socket (6 Point) has a conventional locking arrangement which includes lock button and snap ring fitted on the male square drives. We can also provide Impact Hex Socket (6 Point) with two cross holes and groove for locking onto the impact wrench using O-ring and pin arrangement. Impact Hex Socket (6 Point) available in different square drives to cover nut gross flat sizes 6mm to 235 mm and to 9.1/8 in standard and deep lengths. Available in :3/83/411.1/22.1/23.1/2Product Details :Black coatingMaterial used : EN 47Hardness maintained : 38-42 HRC

tulex non-sparking impact sockets are used extensively throughout the world in the following industries:* public utilities - gas, electric * flammable material manufacturing* petro-chemical * aircraft and missile factories* grain handling * explosives manufacturing* pipeline construction * paint manufacturing* pharmaceuticals * tankers* armed forces * shipyards* non-magnetic applications * airports. And many other where sparks are a potential fire or explosion hazard.

features:* greater safety personnel and installations * strong and long lasting* comprehensive standard range * corrosion resistant* special tools made to customers own designstulex non-sparking safety tools are guaranteed against defects in material and workmanship. Tools which fail because of misuse, intentionally or unintentionally, or for any reason other than stated above, cannot be replaced free of charge.

instructions for use:non-sparking tools have to be softer than conventional tools. For this reason the use of non-sparking tools has to be carried out with special care. Overstraining has to be avoided. The use of non-sparking tools must not be the only preventive measure in areas of fire and explosion risk. For an extensive protection of staff and equipping, please follow the instructions of your professional associations. Material of construction for tulex non sparking sockets brass/ berrylium copper.
prices: prices will be quoted upon inquiry or request only.

We also manufacture special Nut Rotating sockets for Bolt Tensioner applications as per customer drawings and specifications.

These sockets are available from 19 mm across flat to 80 mm across flat and 3/4" across flat to 4" across flat and 21 mm across flat to 52 mm across flat and 3/4" across flat to 2. 11/16". The outside diameter at the socket end consists of a hex across flat portion and the outside diameter on the drives end consists of splines. These are available in standard and deep lengths.

Tulex Single Hex Impact Extesion Sockets are sockets with built in integral extension. These are suitable for impact applications and are available in Single Hex configuration in rigid as well as swivel joint design. These are provided with locking ring and pin. It is available in 100 mm, 150 mm and 200 mm overall lengths in 3/8" (6.35mm) and 1/2" (12.7mm) square drives to cover nut across flat sizes 7mm to 27 mm. These are ideal for use in automobile industry.

Tulex Single Hex Impact Extesion Sockets are sockets with built in integral extension. These are suitable for impact applications and are available in Single Hex configuration in rigid as well as swivel joint design. These are provided with locking ring and pin. It is available in 100 mm, 150 mm and 200 mm overall lengths in 3/8" (6.35mm) and 1/2" (12.7mm) square drives to cover nut across flat sizes 7mm to 27 mm. These are ideal for use in automobile industry.

Swivel Impact Socket has a swivel joint as a built in feature. These are useful for tightening of nuts located at difficult angular positions, which cannot be reached with standard sockets. These are available in 3/8" (9.5 mm) and 1/2" (12.7 mm) square drives to cover nut sizes from 7 mm to 24 mm across flat. Tulex Swivel Impact Extension Sockets are used where requirements of bolt clearance exists.

Tulex Swivel Impact Socket has a swivel joint as a built in feature. These are useful for tightening of nuts located at difficult angular positions, which cannot be reached with standard sockets. These are available in 3/8" (9.5 mm) and 1/2" (12.7 mm) square drives to cover nut sizes from 7 mm to 24 mm across flat. Tulex Swivel Impact Extension Sockets are used where requirements of bolt clearance exists.

Besides a complete range of Tulex Heavy Duty Industrial Tools, we can also cater for special tools to suit critical applications as per drawings / specifications provided by the customer. Tulex may have what you need as a non catalogue item - or our experienced staff of tooling experts can design and produce applications specific special tools to suit your exact needs and requirements. Tulex begins its quality with the selection of best raw materials and each tool manufactured by Tulex is machined under close tolerance standards. You will always get an exact, sure fit - a fit not possible from tools made in a process that grows less precise with every stamp. Each tool goes through perfect heat treatment and tempering process that lets you select the highest degree of hardness you desire.
A few special tools are illustrated below

Tulex Flank Drive Socket can also be called a fast lead socket. These are basically designed for use with power tools and multiple spindle power tools. A slight recess is provided on the 6 corner points of the hex, which provides a speedy complete engagement with the nut almost instantly. This speeds productivity and extends tool life. Engagement is possible without starting and stopping the tool for each nut.

Tulex Flank Drive Socket can also be called a fast lead socket. These are basically designed for use with power tools and multiple spindle power tools. A slight recess is provided on the 6 corner points of the hex, which provides a speedy complete engagement with the nut almost instantly. This speeds productivity and extends tool life. Engagement is possible without starting and stopping the tool for each nut.

Tulex Magnetic Sockets holds the fastener in the driving position even when working straight down. Time wasting motions are eliminated when working in hard to reach areas.
Magnetic Spring Loaded Sockets also known as Bolt Clearance Sockets allows the bolt or stud to retract into the socket body due to the spring loaded or hollow cylinder magnet as the nut is run down.

Tulex Magnetic Sockets holds the fastener in the driving position even when working straight down. Time wasting motions are eliminated when working in hard to reach areas.
Magnetic Spring Loaded Sockets also known as Bolt Clearance Sockets allows the bolt or stud to retract into the socket body due to the spring loaded or hollow cylinder magnet as the nut is run down.

Tulex Thin Walled Impact Sockets are used at places of inaccessibility where there are restrictions due to the diameter at the nose end of the socket. In this case the diameter of the nose end is reduced. 12 point Thin Walled Sockets are available on request. Thin Walled Impact Sockets are manufactured in 3/8" (10 mm), 1/2" (12.5 mm), 3/4" (20 mm) and 1" (25 mm) square drives. Thin walled deep hexagon sockets are also available on request.

These sockets are designed to be used with pneumaticelectric impact wrenches and nut runners. They have single hex broaching for good grip on nuts and bolts to avoid tools slipping during high speed tightening operations. Its extra wall thickness together with special steel and heat treatment process helps absorb the shock transmitted to sockets while in use with impact wrenches. They have a conventional locking arrangement i.e. lock button or snap ring fitted on the male square drives. They can also be provided with two cross holes and groove for locking onto the impact wrench using 'O' ring and pin arrangement. These are available in 14", 38", 12", 34", 1", 1.12", 2.12", 3.12" square drives to cover nut across flat sizes 6mm to 235 mm and 14" to 9.18" in standard lengths and deep lengths. These are ideal for operating with hydraulic wrenches and most suitable for use in automobile industry.

We deal in providing Allen Bit Sockets which are used to tighten socket cap screws and bolts with pneumatic/ hydraulic impact wrenches. We offer Allen Bit Sockets in different dimensions covering flat sizes ranging from 3mm to 50mm (1/8 to 2 SAE). Available in Following Square Drives :

These are used for tightening of socket cap screws and bolts with pneumatic / hydraulic impact wrenches. The are available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm), 1" (25.4 mm) and 1.1/2 (38.1mm) square drives covering across flat sizes ranging from 3 mm to 50 mm (1/8" to 2" SAE). These Impact Hex Adaptors has a provision for locking pin and 'O' ring onto the impact wrench. For particular applications, we can also cater to requirement of extended length Hex Bit Sockets.

These are used for tightening of socket cap screws and bolts with pneumatic / hydraulic impact wrenches. The are available in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm), 1" (25.4 mm) and 1.1/2 (38.1mm) square drives covering across flat sizes ranging from 3 mm to 50 mm (1/8" to 2" SAE). These Impact Hex Adaptors has a provision for locking pin and 'O' ring onto the impact wrench. For particular applications, we can also cater to requirement of extended length Hex Bit Sockets as per client specifications.

Surface Drive Impact Sockets :
Tulex Surface Drive Sockets are designed for use on single or multiple spindle power tools (Non Impact Type). Specially relieved corners at the hex opening provides a floating action thus permitting the socket to engage the nut on the surface of the flat hex rather than on the corners. The large openings on six corners of the opening create a floating action that allows the socket to slip quickly and easily on to the nut or bolt. These are ideal for compensating for imperfect alignment between the tool and the fastener. These are generally recommended for impact usage. This type of a free
corner profile distributes the surface loads and relieves the possible stress areas. The torque transmitting capability is increased and the high stress concentrating points are completely eliminated increasing the impact resistance of the fastener.

We Offer Impact Hex Socket (12 Point) is designed for pneumatic/electric impact wrenches and nut runners. Impact Hex Socket (12 Point) is furnished with Double hex broaching which is provided for good grip on nuts & bolts to avoid tools slipping during high speed tightening actions. Also, Impact Hex Socket (12 Point) has a conventional locking facility which comprises of lock button and snap ring fitted on the male square drives. We can also deliver Impact Hex Socket (12 Point) with two cross holes and groove for locking onto the impact wrench using O-ring and pin arrangement. Impact Hex Socket (12 Point) available in different square drives to cover nut gross flat sizes 6mm to 235 mm and to 9.1/8 in standard and deep lengths. Available in :3/83/411.1/22.1/23.1/2Product Details :Black coatingMaterial used : EN 47Hardness maintained : 38-42 HRC

These sockets are designed to be used with pneumatic/electric impact wrenches and nut runners. They have single hex broaching for good grip on nuts and bolts to avoid tools slipping during high speed tightening operations. Its extra wall thickness together with special steel and heat treatment process helps absorb the shock transmitted to sockets while in use with impact wrenches. They have a conventional locking arrangement i.e. lock button or snap ring fitted on the male square drives. They can also be provided with two cross holes and groove for locking onto the impact wrench using 'O' ring and pin arrangement. These are available in 1/4", 3/8", 1/2", 3/4", 1", 1.1/2", 2.1/2", 3.1/2" square drives to cover nut across flat sizes 6mm to 235 mm and 1/4" to 9.1/8" in standard lengths and deep lengths. These are ideal for operating with hydraulic wrenches and most suitable for use in automobile industry.

All impact sockets are made from high strength alloy steel. These are heat treated for the best combination of strength and impact resistance. All impact sockets have an optimum wall thickness for strength and access on fasteners having restrictions. The depth of the hex openings is designed to accommodate the full standard fastener head. All impact socket have a ring and pin arrangement for securing them to the drive. The impact sockets are plated and black oxidised coated for increased protection against rusting. The Impact Socket can be manufactured with chamfered openings for ease in engagement with the drive tool and the fastener against specific requests.

Note :
1)Locking ring and Pin are not included with the grooved impact sockets.
2)Locking ring and pin are available on request and has to be ordered separately.

These sockets are designed to be used manually, for example, with torque wrenches. They have double hex broaching and a black industrial rust resistant finish. The standard range covers bolt/nut across flat sizes 5.5 mm to 60 mm, 1/4 inches to 2.7/16 inches and equivalent British sizes in 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm), 3/4" (19 mm) and 1" (25.4 mm) square drives. They are designed for extra torque to meet heavy duty industrial needs and are available in standard and deep lengths. Deep sockets can be used to accommodate long studs. The socket can be provided with a positive locking design for its attachment with the driving tools having spring loaded ball and button. This is a safety feature for the operator working in difficult areas.

Note: 1. Bi-Hex Impact Sockets can also be supplied against special orders.2. Thin walled Impact Sockets (Hex/Bi-Hex) can also be supplied against special orders.

TULEX HEAVY DUTY IMPACT DUALER SOCKETS/WRENCHES

Tulex Dualers can be applied throughout the plant and its versatile design makes it compatible with slugging, impact and hydraulic wrenching. These tools are also available in metric & inch sizes. Please request for sizes and details.