Electroarsenal Llc

We are offering cable rewinding machine. Stationary device for rewinding of cable with cross section up to 35 mm. the device prima-m2 is a stationary device for rewinding of the cable with an external diameter of 35 mm. measurement units are equipped with electronic programmable counter solo-e2. the device is equipped with manual cable-layer. In the modified device, the electric drive with worm gear is used, soft start and rotation speed control of the main shaft is carried out by frequency converter (made in ukraine), friction safety clutch is installed. Additionally, the cable layer can be equipped with electric drive. technical characteristics:measurement error, not more% 1 diameter of the rewinding products max, mm 35 diameter of the formed bundle, max, mm 1000 weight of the forming bundle, max, kg 350 electric power, kw 1.1 supply voltage, v (base case) 220 the use of the frequency converter soft start, smooth speed control electronic counter solo-e2 linear speed of rewinding, max, m min 42 overall dimensions of the device, mm 2000x1200x1600 net weight of the device, kg 110 scope of supply: unwinding device prima-m2 - 1 piece. passport and manual instructions - 1 copy.; passport and a manual for length counter - 1 copy

We are offering cable rewinding machine. A device for rewinding and measuring of length of electric wires, cords, cables with a manual drive. The device is a stationary one with a manual drive for rewinding and measuring of the length of the electric wires, cords, cables and other samples of cables and wires as well as cable with outer diameter of 1-16 mm. In shops, warehouses, etc. technical characteristics:diameter of rewinding wires, cords, cables, mm 1 . 16 the maximum outer diameter of the bundle at the giving off unit, mm 600 the maximum outer diameter of the forming bundle at the receiving unit, mm 520 the maximum weight of rewinding bundle, kg 50 the giving off device has a centering system of bundles in the range, mm 120-270 measurement accuracy of the measuring unit, % 1 drive of the receiving unit: manual manual overall dimensions of the device, mm 1600x800x1250 the mass of the device, not more, kg 50 scope of supply: unwinding device optima- r - 1 piece. passport and manual instructions - 1 copy; passport and a manual for length counter - 1 copy.

We are offering cable rewinding machine. Installation for rewinding the cable on the drums and in bay, diameter up to 75 mm magnum-2-22-22. Receiving station magnum-2-22-22 comprises: receiving knot magnum-2-22-22 (electric drive with smooth start and adjustment of the number of revs of the main shaft by a frequency converter, brake system; cable laying machine (electric drive and regulation of speed movement of apportionment, dimensional knot, electronic programmable counter solo-e2). Lifting and lowering of lodgements of adoptive drum by a hydraulic drive electric drive. Complete with shaft and a system of fixing cones. Technical characteristics: type of receiving drum, max 10-22maximum weight of the receiving drum, m 5.0 measurement error, not more% 1, 5maximum diameter of rewinding products, mm 70maximum diameter of the formed bay on additional coil, mm 1250width of the formed bay, mm 350 electric power, kw 4 supply voltage, v 380 rotation speed of shaft of the receiving drum (coil), r min 15-40 net weight of device (not more than), kg - scope of supply: receiving station magnum-2-22-22- 1 pc. passport and manual instructions - 1 copy; passport and operating manual for counter of metric area- 1 copy

We are offering cable rewinding machine. Desktop unwinding device with a manual drive for rewinding and measuring of the length of electrical wires, cables, cords, ropes. solo-520 m is designed for rewinding and measuring of length of electric wires, cords, cables and other samples of cables and wires, as well as the cable with the outer diameter of 1- 12 m, in stores, warehouses, etc. technical characteristics: outer diameter of rewinding products, mm 1 . 12 the diameter of giving off bundle, mm 520 height of giving off bundle, mm 200 the diameter of the forming bundle, mm 450 the height of the forming bundle, mm 200 the frequency converter + controlled rate of phase change of the take up coil, rev min 15-50 the measurement error is not more than, % 1 power: voltage, v 220 motor power, kw 0.18 weight unit kg 32 overall dimensions of the device, mm 1200x520x450 scope of supply: unwinding device solo-520 m - 1 piece. passport and manual instructions - 1 copy; passport and a manual for length counter - 1 copy.

We are offering cable rewinding machine. Receiving station tandem-18 consists of all-welded frame, mechanism of lifting and lowering made in the form of swinging farm hydraulic drive with manual pump. receiving station for drums to 18 weight up to 4, 0 tones ( shaft with a system of fixing cones) and coil for bays of the cable by type of the drum 10 weight 400 kg. installed gearmotor with smooth start and adjustment of the number of revs of the main shaft by a frequency converter. Cable laying machine with electric drive and regulation of speed movement of apportionment, dimensional knot 45 mm with electronic counter solo-e2. Maximum weight of the receiving drum - 4.0 t; maximum of the formed bay 400 kg;width of the formed bay - 350 mm. Rotation speed of shaft of the receiving drum (coil) - 15-40 rev min. technical characteristics: type of receiving drum, max 8-18maximum weight of the receiving drum, m 4.0 measurement error, not more% 1 maximum diameter of rewinding products, mm 45maximum diameter of the formed bay, mm 900 maximum weight of the formed bay, kg 400 width of the formed bay, mm 350 electric power, kw 4 supply voltage, v 380 rotation speed of shaft of the receiving drum (coil), r min 15-40 overall dimensions of the device, mm 3200x3600x2000 net weight of device (not more than), kg 1500 scope of supply: receiving station tandem-18 - 1 pc. passport and manual instructions - 1 copy.; passport and operating manual for counter of metric area- 1 copy

We are offering cable rewinding machine. stationary device is for rewinding of cable with cross section up to 35 mm. prima-m is a stationary device for rewinding of cable with an external diameter up to 35 mm. measurement units are equipped with electronic programmable counter solo-e2. the device is equipped with manual cable-layer. In the modified device, the electric drive with rotation speed control of the main shaft is used, carried out by the frequency converter (made in ukraine). technical characteristics:measurement error, not more% 1 diameter of the rewinding products max, mm 35 diameter of the formed bundle, max, mm 900 weight of the forming bundle, max, kg 120 electric power, kw 0, 75supply voltage, v (base case) 220 the use of the frequency converter soft start, smooth speed control electronic counter solo-e2 linear speed of rewinding, max, m min 42 overall dimensions of the device, mm 2000x1200x1600 net weight of the device, kg 80 scope of supply: unwinding device prima-m - 1 piece. passport and manual instructions - 1 copy.; passport and a manual for length counter - 1 copy

We are offering cable rewinding machine. A device for rewinding and measuring of the length of the electric wires, cords, cables. the device is a stationary unit with frequency controlled electro drives for rewinding and measuring of the length of the electric wires, cords, cables and other samples of cables and wires as well as cable with outer diameter of 1-16 mm in shops, warehouses, etc. in the modified device optima-m3 the abb frequency converter is used. (mitsubishi, moeller, schneider electric). technical characteristics:diameter of rewinding wires, cords, cables, mm 1 . 16 the maximum outer diameter of the bundle at the giving off unit, mm 600 the maximum outer diameter of the forming bundle at the receiving unit, mm 520 the inner diameter of the forming bundle, mm 250 the width of the forming bundle, mm 200 the maximum weight of the rewinding bundle, kg 50 the giving off device has a centering system of bundles in the range, mm 120-270measurement accuracy of the measuring unit, % 1 controlled rate of phase change of the take up coil, rev min, rev min 15-70 drive of the receiving unit: soft start, smooth speed control electric drive, voltage v 220electric drive capacity, kwt 0, 25overall dimensions of the device, mm 1600x800x1250 the weight of the device, not more, kg 70 scope of supply: unwinding device optima-m3 - 1 piece. passport and manual instructions - 1 copy.; passport and a manual for length counter - 1 copy

We are offering cable rewinding machine. desktop unwinding device with a manual drive for rewinding and measuring of the length of electrical wires, cables, cords, ropes. solo-520r is designed for rewinding and measuring of length of electric wires, cords, cables and other samples of cables and wires, as well as the cable with the outer diameter of 1- 12 m, in stores, warehouses, etc. technical characteristics: outer diameter of rewinding products, mm 1 . 12 the diameter of giving off bundle, mm 520 height of the giving off bundle, mm 200 diameter of the forming bundle, mm 450 the height of the forming bundle, mm 200 the measurement error is not more than, % 1 weight unit kg 25 overall dimensions of the device, mm 1200x520x450 scope of supply: rewinding device solo-520r - 1 piece. passport and manual instructions - 1 copy.; passport and a manual for length counter - 1 copy.

We are offering cable rewinding machine. Coiler - stationary device for rewinding of cable with cross- section up to 35mm. coiler prima-r - stationary device for rewinding of cables and wires with an outer diameter of 35 mm. The measuring unit is equipped with an electronic programmable counter solo-a1. The device is equipped with a manual drive and manual cable layer. technical characteristics:measurement error, not more% 1 diameter of rewinding products max, mm 35 diameter of the forming bundle, max, mm 900 the width of the forming bundle, mm 240 the height of the forming bundle, mm 300 weight of the forming bundle, max, kg 150 power, kw - drive of the receiving unit manual electronic counter solo - a1 overall dimensions of the device, mm 1700x800x1300 net weight of the device, kg 50 scope of supply: coiler prima-r - 1 piece. passport and manual instructions - 1 copy; passport and a manual for length counter - 1 copy

We are offering cable rewinding machine. A device for rewinding and measuring of the length of the electric wires, cords, cables. the device is a stationary one with frequency controlled electro drives for rewinding and measuring of the length of the electric wires, cords, cables and other samples of cables and wires as well as cable with outer diameter of 1-16 mm in shops, warehouses, etc. in the modified device optima m-2u the frequency converter is used, made in ukraine. technical characteristics:diameter of the rewinding wires, cords, cables, mm 1 . 16 the maximum outer diameter of the forming bundle at the receiving unit, mm 520 the inner diameter of the forming bundle, mm 250 the width of the forming bundle, mm 200 the maximum weight of the rewinding bundle, kg 50 measurement accuracy of measuring unit, % 1 controlled rate of phase change of the take up coil, rev min, rev min 15-70 drive of the receiving unit soft start, smooth speed control power: voltage, v 220 motor power, kw 0.25 overall dimensions of the device, mm 1050x600x1250 the mass of the device, not more, kg 60 scope of supply: unwinding device optima-m2u - 1 piece. passport and manual instructions - 1 copy.; passport and a manual for length counter - 1 copy