Udeyraj Electricals Pvt Ltd

Marol, Mumbai, Maharashtra

• 220 ± 5% Volts AC, 50 Hz, single phase. 30kV / 50kV / 80kV
• 0.1Hz, 0.05Hz, 0.02Hz. Fluctuation < 0.5%
• ±3%. <3%.
• <5% 1) Frequency : 0.1Hz, 0.05Hz, 0.02Hz 2) Timing: 0-99 minutes. 3) Test Voltage: Zero to rated kV. 4) Trip Current: Zero to rated mA.
• 1) Self-check. if condition is abnormal, tester shuts down & displays ‘Load unconnected’ 2) Mains fuse. 3) Over voltage protection. 4) Over current protection. 5) Protective HV resistor connected inside. In two units: Controller and Booster.

• Feature Pure Sine wave sinusoidal output, Low harmonic distortion, Digital display real time data: Frequency, Voltage, Current, Power and Power Factor, Solid state with proven advanced IGBT and SPWM technology, Protection for ‘Short-circuit’, ‘Over-current’,
• Applications UDEY- FRIVO series are suitable for applications ranging from production-line testing through to research and development laboratories, workshops, shipyard, ship manufacturing and repair plants, etc.

• Machine Feature 1. Makes test easy and quickly2. All calculations are based on known standard theory, which is widely accepted.3. Fully digital processing through embedded microprocessor enables high accuracy, reliability and stability.4. Two isolated channels to input t
• Range of leakage current 0-10mA (RMS), 50 Hz/60 Hz.
• Accuracy of leakage current ± (reading x 5% + 5 uA)
• Accuracy of fundamental resistance current (PT mode/ No interference) ± (reading x 5% + 5 uA)
• Accuracy of current harmonic ± (reading x 10% + 10 uA)
• Input impedance of leakage current ≤2Ω
• Range of reference voltage 25-250V (RMS), 50 Hz/60 Hz.
• Accuracy of reference voltage ± (reading x 5% + 0.5 V)
• Accuracy of voltage harmonic ± (reading x 10%)
• Input impedance of leakage current ≥300K Ω
• Range of electrical field 30kV/m – 300kV/m.
• Accuracy of electrical field ± (reading x 10%)
• Accuracy of electrical field harmonic ± (reading x 10%)
• Battery duration 6 hrs continuous at full charge.
• Charging input 100-250V, 50 Hz/60Hz.
• Charging time 6 hrs approximately.
• Operating conditions 0-60 Deg.C.,
• Storage temperature -20 to 60 Deg.C.
• Relative Humidity <90% non-condensing
• Dimensions 35 cm (L) x 28 cm (W) x 18 cm (H)
• Weight 5 kg ( tester) ; 4 kgs (Cable Case)

• Min. Order (MOQ) 1 Piece
• Country of Origin India
• Number Of Flower Transformer Ratio Meter
• Feature Accuracy, Easy To Use
• Condition New
• Frequency 0-50Hz
• Driven Type Electric
• Power Source Electric
• Brand Name UDEYRAJ
• Function automatic
• Phase 1
• LCD 220V±10%, AC 50 Hz.
• 1:10000 HV:190V AC. MAX. LV: 0.19 – 190V AC. MAX.
• 0.2 class < 40º C. < 85% R.H.
• Test leads 8 meters long 40 x 30 x 20 cm (TRM 11)

Additional Information:

• Machine Feature Portable light weight, Digital display in 4 digits.
• Standard Accessories Power Supply cord 3 core, Flexible testing cable set with alligator clamps-2 pairs, Operating Manual.

• Voltage display 4.5 digit LED
• Accuracy AC 1.5% + 5 counts
• Accuracy DC 1.0% + 5 counts
• Light weight approx. 3.5 kg

• 0.2 class 4½ digit LCD for resistance 3 digit LCD for test current / temperature
• Display of ‘E0000’ [E flashes]. Power on/range/battery condition: Recharge/Under voltage/ Full/ Discharge.
• up to 40º C. < 85% R.H. Aluminum cabinet with cover and lifting handle
• 35(L) x 31(W) x 20(H) cm 7.0 kg with test leads.

• Feature Maximum output of2 k\\L, Stainless Steel 3 terminai oil test ceil., Memory storage and recall of test resutts, I-Touch LCD screen.
• Input voltage 220V±10% AC, 45 to 60 Hz
• Output voltage 1000V to 2000V in steps of 200V
• Output voltage Accuracy: ±2%
• Output current 25mA maximum
• Display LCD display [240 x 180]
• Printer Thermal built-in.
• Controls Keypad
• Indicators Status: HV; Heating;
• Oil cell S S of size 70mm (D) x 120 mm (H). 3 pole, electrode distance of 2mm,
• Cell capacitance 60±2pF
• Oil cell voltage 2000V maximum
• Heating Type : High freq. induction heater of 500W maxi. Temp. range : < 100˚C Temp. error : 1˚C
• Measuring parameters : Range : 0.000% to 100.0%
• Tan delta : Accuracy : 1% of reading + 20 digits
• Capacitance : Range : 15.0pF to 300pF
•   : Accuracy : 1% of reading + 1pF
• Resistance : Range : 10 Mohm to 10 Tohm
•   : Accuracy : 10% of reading
• Volume resistivity Calculated automatically and displayed.
• Environmental Relative humidity : up to 50˚C Relative humidity : < 90% non-condensing
• Dimensions Size : W x D x H: 45 x 31 x 36 cm Weight : 20 kg

• Feature Maximum output of 12 kV/200 mA, RS 232 interface, Can re call stored 99 tests results., Automatic calendar and time running. Safety Features : • High Voltage protection, Input Voltage protection, Grounded protection, No voltage overshoot
• Standard Accessories 12 meters of HV cable with hook and clip, 2 sets of Cx and Cn cables with clip, Guard cable with clips, Grounding cable and power cord, RS 232 Cable, RS 232 Software, Paper roll, Fuses – 2 nos

• Single phase Input: 240V, 50/60Hz AC 1 ph. Output: 0-270V, 50/60Hz AC 1 ph.
• Three phase Input: 415V, 50/60Hz AC 3 ph. Output: 0-470V, 50/60Hz AC 3 ph
• Excellent Regulation The drop in voltage from “no load to full load” is minimal in Reguvolt Auto-transformers.
• High Efficiency Careful design and proper selection of copper and core assures the user of low watt loss, as compared to other type of controllers.
• No Wave From Distortion Reguvolt provides an output voltage wave-form, which is a faithful and distortion less replica of the input voltage wave form.
• Silver Plated Communator A special silver plating technique is used on the commutator, enabling it to with stand high overloads & maintain constant contact drop. It is also ensures smooth operation, long life & increased resistance to corrosion.
• Smooth & Linear Output As voltage between turns is small and as the brush-arm is in constant contact with more then one turn, harmful sparking is avoided and output voltage can be set very easily to fraction of a volt from zero onwards by rotation of the knob.
• Low Magnetizing Current By using an adequate section of high quality grain oriented silicon steel, the iron losses in Reguvolt, are controlled to the minimum. The no-load current in all Reguvolt transformers, is invariably less than 3% of the rated current.

• Output Current Depend upon kVA capacity.
• Input 415V 3 phase 4 wire AC 50-60 Hz
• Output 0-700V (LINE TO LINE), 3 phase 4 wire AC 50-60 Hz
• kVA 50kVA / 75kVA / 100kVA / 125kVA / 150kVA
• Output Control Motorized, through push buttons
• Cooling ONAN
• Temprature Rise In oil / winding: 45o / 55o C
• Duty Cycle Indoor continuous duty.
• Metering Digital 3ph voltmeter and 3 ph ampere meter.
• Indicators ‘R-Y-B’
• Efficiency 96% at full load at unity power factor.
• Enclosure Enclosure made of sheet steel powder coated.
• Fittings : 4 rollers , 4 lifting hook , 2 earthing terminals , Drain valve , oil filling hole with cap , oil level indicator, rating plate.
• Termination Suitable common cable box for input and output
• Weight (without oil) 150kVA capacity model: 750 kg approximately
• OIL QTY 150kVA capacity model: 800 litres approximately

• Input voltage 220V±10% AC, 50 Hz
• Output current >1A, 3 channels
• Data sampling Sampling 6 channels Frequency: 10KHz/s
• Display LCD display [320 x 240]
• Printer Built-in Thermal printer
• Controls Keypad
• Ambient up to 50° C
• Relative humidity < 90% non-condensing
• Dimensions LTC-27 W x D x H: 35 x 23 x 20 cm approximately : 5 kg approximately
• Transport case W x D x H: 40 x 28 x 26 cm approximately 6.5 kg approximately
• Transition Resistance Range:0.5 Ohms to 20 Ohms Accuracy:+ 5% + 3 bytes Resolution:0.01 Ohms
• Transition Time Range:<250ms Accuracy:+ 0.1% + 1 byte Resolution:0.1 ms
• Mains cord 3 core 2 meter long: 1 number
• Testing leads Each 10 meter long with alligator clamps Red color: 1 number Black color: 1 number Yellow color: 1 number Green color: 1 number
• Grounding wire 1 number
• Printer roll 2 numbers
• Operating manua 1 number
• Soft case Transportation case for carrying accessories

• Input voltage 415V 3 ph 4 wire, AC 50Hz
• Output voltage 0-1000V, 3 phase 125 Hz (+3%) continuously variable.
• Output Frequency 100 Hz / 125Hz / 200 Hz
• Capacity 15kVA / 30kVA / 50kVA
• Metering Digital: Frequency meter, 3 ph Voltmeter, 3 ph Ammeter
• Duty Cycle 50.00%
• Trip Selectable in 4 steps. Cuts off output
• Timer Digital countdown timer
• Output Control Manual by motorized continuously variable auto transformer
• Indicators ‘R-Y-B’, READY, TRIP
• Cooling AN
• Construction Two units, one MG Set mounted on bed, open execution and second control unit. M.S. angle frame work with sheet steel cabinet for control unit, painted in power coat.

• Supply Power 230V AC + /- 10%, 50 Hz.
• Output Voltage 5-60kV DC
• Ripple Factor ≤ 3%
• Trip 300 uA
• Rating Intermittent [15 min ON / OFF]
• Accuracy HT setting ≤ 1.5%
• Meters Digital display: kV and uA;Accuracy: 3% max + /- 2 digits
• Display LCD
• Dimensions (LxBxH) Control unit: 30x24x20 cm: HV unit: 20 dia x 60 cm
• Ambient conditions 45 deg C max; RH: Max 80% non- condensing
• Accessories Molded mains cord 2 mtr long: 1 number HV Test leads 3 meter long: 1 set Interconnecting cable meter long: 1 set Earth cable 4 meter long: 1 number Discharge rod: 1 number