Hardware Fittings And Accessories

Our Complete range of products are Safety Function Latches, Telescopic Slides, Hand Knob, Adjustable Handles and Torque Limiting Wing Knobs.

Safety Function Latches

Latches with safety function Latches GN 115.9 have a push-to-turn safety function. In the two end positions the spindle is locked in place by the latch. The device can be turned 90 only when the operating element is pressed down, which releases the safety pin from the locked position. This feature protects the latch reliably from moving on its own or as the result of vibrations.The beveled edges on the latch make closing the door easy. Latches with different cranks cover a latch distance A from 4 to 32 mm.

View Complete Details

Ask Latest Price & Details

Telescopic Slides

Operating temperature -20 °C to 100 °C

Telescopic slides Telescopic slides GN 1440 are installed vertically and in pairs. The stroke reaches 100 % of the nominal length l1 (full extension). Patented plastic ball cages ensure extremely smooth running of the slide.All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.

View Complete Details

Ask Latest Price & Details

Hand Knob

Hand knobs GN 6335.9 have a clamping contact area which is connected to the knob via an axial ball bearing. This has led to the following advantages: Doubled clamping force through vastly reduced friction. There is no movement on the contact area between star knob and component which greatly reduces any marking on the clamping area. In addition a reduced creep factor has been achieved by the indreased preload.

View Complete Details

Ask Latest Price & Details

Adjustable Handles

temperature up to 80 °C

Adjustable hand levers GN 306 are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged. Pulling the lever disengages the serrations, allowing it to be swivelled to the ideal clamping position. When the lever is released, the serrations, The brass and plastic tipped studs (Types MS KU) help to avoid damage to the work piece being clamped. The hardened tipped stud (Type DZ) provides an oval point-shaped pressure point. The swivel thrust pad (Type KD) can easily be snapped on and taken off.Pad is supplied unmounted.

View Complete Details

Ask Latest Price & Details

Torque Limiting Wing Knobs

Torque limiting wing knobs Glass-fibre reinforced polyamide based (PA) technopolymer, black (C9) or orange (C2) colour, matte finish.The torque transmission from the wing knob to the clamping element takes place by means of a spring-based mechanical system which prevents the overcoming of the established torque. Upon exceeding the established torque, a "click" sound will be heard to indicate that the maximum tightening has been reached. By turning the knob anticlockwise the mechanism unlocks.

View Complete Details

Ask Latest Price & Details

Crank Handles

Crank handles Brass boss, cylindrical blind hole, transversal semi-machined hole for pinning to shaft. The grooves cut into the cylindrical surface allow an effective and ergonomic grip, though necessarily limited to the fingertips, due to the small size of the handle.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back