Unique Global Enterprises Mumbai, Maharashtra

Physical properties: appearance : redish brown clarity : clear solid content : 70+-2% specific gravity @ 30°c : 0.90 + 0.02 viscosity @ 30°c @ 40% in : 20 - 25 secs. M.t.o.with b4 ford cup acid value : 5 max scratch hardness (air dried) : 1000 gms drying time: (co12% - 0.2%, ca-10% - 0.4, zr 18% - 1.4%, mn 10% - 1.5%) based on solid resin surface dry : 1 – 2 hours tack free : 5 – 6 hours hard dry : overnight baking times at 1200 c. : 30 min. Note: use of manganese along with zirconium & cobalt is must solubility: infinite : m.t.o., toluene, napthas & limited – ketones & esters. Chemical properties: the film is resistant to water, acid (2% h2so4) and alkali (1%naoh) and 5% sodium bi-carbonate solution and gives good anticorrosive properties. This resin by itself is not flexible, so always it is advisable to use along with some plasticizing resins. Recommended use: it can be used as a partial replacement of urethane modified alkyd in coloured wood varnish (like mahgony, red maroon, orange etc.) and long oil alkyd in dark coloured enamels, red oxide metal primers, black enamels, red oxide zinc chromate primer and anticorrosive paints.

We are offering ketonic resins. General description: ketonic comes in fine white prills, light fastness, neutral reaction and resistance to saponification of synthetic resin. Ketonic is mainly used in printing inks, ball point pen pastes and casting resins. Ketonic is of great advantage for its use in paper lacquers, its solubility in spirit, compatibility with shellac and hardness are useful factors for the preparations of polishes, polishing varnishes and lacquers for the surface treatment of wood suitably. Ketonic with nitrocellulose containing in addition phthalate plasticizers, a certain proportion of alkyd resin which are suitable for wood lacquers are distinguished for their high elasticity and resistance to the cold check test synthetic resin. Applications: • flexo & gravure inks, paper inks, wood primers, ball point pen ink, paper coatings, surface coatings, nail varnishes & many more. typical properties: sr. property specification no i) appearance white prills ii) colour in gardner scale (50% in ethanol) 1-2 iii) viscosity@30°c (50% in ethanol in fcb-4) 20 ± 2 iv) melting range (capillary method) 90 – 100˚c v) hydroxyl value 220 - 230 vi) acid value (mg kohgm) 1 max solubility: • ethanol, n-butanol, iso-butanol, acetone, cyclohexanone, methyl iso butyl ketone, phenoxy glycol, methanol & partly soluble in toluene. Compatibility: • alkyds – short & medium oil, epoxy resins, fomaldehyde resins, maleic resins, nitrocellulose, phenolic resins (ss), polyaminoamide resins, polyvinyl butyrals.

We offer a wide range of castor oil and its derivatives that are highly pure and safe to use. Our well-established research and development facilities have enabled us to innovate these castor oils in accordance with the needs of our clients. Our galore of products includes castor oil for agriculture, castor oil for foods, castor oil for paper, castor oil for plastics & rubber, castor oil for perfumeries, castor oil for cosmetics, castor oil for electronics & tele communications, castor oil for pharmaceuticals, castor oil for paints inks & adhesives, castor oil for industrial lubricants and castor oil for textile chemicals. We are supplying a wide range of castor oil and its derivatives which are used in paints, inks & adhesives and are meeting to meet the varied requirements of our clients. Finding varied use in textile processing operation such as dyeing, bleaching, etc, our range of castor oil for adhesives includes. Castor oil fsg is a pale, yellow viscous liquid free from suspended matter and insoluble in water.

We are offering wall putty. Technical details precautions drying time @ 30°c the information provided in this data sheet is not intended to be complete. It is the responsibility of the user to ensure that the product used is suitable for the purpose it is meant to serve. In view of various factors affecting the performance of the coating, we cannot assume responsibility for the product performance, nor do we accept any liability arising from use of this product, unless specifically agreed to in writing by us. The information provided in the datasheet may be modified by us without notice. Orchid wall putty surface dry touch dry recoatability hard dry 30 minutes 1 hr 8 - 10 hrs 24 hrs finish solids pot life shelf life recommended dft theoretical coverage practical coverage smooth & matt 100 ± 2% 45 - 60 minutes 6 months from the date of manufacturing in original sealed bags, with proper storage condition. 1.0 ~ 1.2 mm depending on the surface roughness 20 -22 sq ft kg practicle coverage may depend on surface profile, method of application and weather conditions