DESCRIPTION & APPLICATION:  specially formulated resin based adhesive for bonding PVC-U pipe,  fittings and sheets. It is a fast setting and suited for PVC-U pipes with a diameter of 100 mm or less. Clear Glue is suitable for Non-Pressure applications in residential,  commercial and Industrial work such as Sewerage,  Drainage, Storm Water and electrical cable conduit.  Bonds are waterproof.  FEATURES & BENEFITS:  Manufacture to the highest Australians standards and quality assurance. So the CLEAR GLUE comes with a 10 year manufacture’s  warranty.  All containers are supplied with a natural bristles brush applicator cap to ensures easy application.  Proven product performance over several years in millions of applications around India.  PHYSICAL PROPERTIES:  Drying Time : 20 minutes  Joints strength to exceed : 0.1 MPa   to    100 kPa or 14.5 psi  Drying Time : 1 Day  Joints strength to exceed : 1 MPa   to   1000 kPa or 145 psi  Drying Time : 60 Days  Joints strength to exceed :  4 MPa   to   4000 kPa or 580 psi  Appearance:                              Clear Viscos Liquid  Specific Gravity @ 20’C, cPs :  500    -     700  Contents :                                  Contains more than 700g / L Hydrocarbon Liquids.  Shelf Life :                                 2 Years if unopened and stored in a cool, dry well ventilated place out of direct sunlight.  DIRECTIONS FOR USE:  PVC-U Pipe cement joining compound  PREPARING THE JOINT: 

1. Ensure pipe is cut square and remove burrs. 
2. To ensure correct assembly of joint, mark pipe at a distance equal to full socket depth. 
3. Test joint for dry fit. 
4. Clean pipe and inside of socket using a clean cloth freshly moistened with Priming fluids. This is  essential to ensure a satisfactory bond.

MAKING THE JOINTS: 

1. Shake or stir thoroughly Clear Glue before using 
2. Apply Clear Glue in full even coats to both surfaces firstly to the inside of socket, then to external surface of pipe end. 
3. Immediately assemble,  pushing the pipe home to the full depth of the sockets. 
4. Hold bounded joint in position for at least 30 seconds. 
5. Do not disturb for 5 minutes. 
6. Allow 24 hours curing before testing.  

 

We are offering a huge array of Urja Peelable Coatings OR Strippable Coating to our clients. The offered peelable sealant is manufactured in strict quality assurance systems and with the responsible care program. It is a high-quality multipurpose non-sag polymeric sealant that on exposure to atmosphere and humidity to form a durable elastomeric film which can simply be peeled away when required, without damage to the substrate surface. It is mainly used to protect components during the shipment and storage. Our esteemed clients can avail this Peelable Coating at the industry leading prices.

We are the main supplier of this product.

description:

nexo seal pu auto windshield glass sealant is a one part, high viscosity, polyurethane

based sealant which cures by the action of air moisture and changes the product from a

pasty to an elastomeric mastic. it offers excellent adhesion on glass and metal. it is most

suitable for bonding windshield inthe automotive industry.

features:

highmodulas&tensile strength

excellent adhesion on glass and metal surface

outstanding durability

permanently flexible

weatherproof

good uv resistance

uses:

sealing for automotive windscreen, windows and scuttles sealing in

automotive, caravan, ship bulding and railway industry

limitations:

avoidexposure to highlevel of chlorine.

avoidcontactwithalcohol andother solvent cleaners during cure.do not cure in

the presenceof curing silicone sealants.

do not apply when a moisture vapour transmission condition exists at timeof application, as

this can cause bubbling within the sealant.

page 2

joint design:

the specified sealant bead size should be calculated to comply with the compression and

extension capabilities of the sealant in relation to the anticipated joint width due to

expansion and contraction.

sealant widthshould never be less thansealant depth.

generally calculation of the width of pu sealant bead should be computed on the basis of

wide movement accommodation of 25%.

compression and extension capability minimum bead size should not less than 3mm to

accommodate movement.design joint depth of which ratio width becomes 0.5to 1.

joint depth maximun 15mm.

application:

surface must be clean and dry. remove all dirt, oil, grease, detergentsandloose

material.

mask smooth surface to simplify clean up.

cut tip off cartridge. cut nozzle to desired size at 45 angle. insertcartridgeinto

caulking gun.

insert cartridgeintocaulking gun.

push sealant aheadfor uniform bead.

tool within 15 minutes with joint nail or putty knife.

clean off excess sealant with m.e.k. or toluene before dry

do not apply the sealant below +5c. warm up the cartridges or sausageat 20c if

application by coldweather

specification:

type thixotropicpaste

color black

odour light

appearance non-sagging paste

specific gravity 1.5 to 1.6

shore a hardness 40-45

modulus at 100% e 0.8

skinning time 40 60 minutes

cure rate 3mm per 24 hours (23c & 50%r.h.)

application temperature +5c to +35c

storage temperature between (+5c +25c)

shelf life 12 months (+5c +25c) from date of packing.

caution:

uncured sealant may irritate eyes. in case of contact with eyes, flush withwater and

obtain medical advice.useinwell ventilatedarea.

shelf life:

use within 12 months from date of production. store in dry and coolconditionbetween5c&

30c

NEXO C LOCK CPVC Solvent Cement is yellow medium bodied solvent based high strength cement for CPVC pipe 

and fittings

SCH 40 & 80 types I & II up to 6’’ in diameter. Also for potable pressure pipe lines.

Product Advantages:

Self-curing

Waterproof

Faster to use

Strong and permanent bond

Resist temperatures over 180’F (82’C)

Flexible

Reinforced for pressure resistance

Uses:

Developed for flexible and rigid pipes, reinforced to resist every kind of pressure.

Products Data:

Finish Colour Golden Yellow

Solids % 25 + - 2

Open Time up to 30 second

Curing time 24 hours

Viscosity 900 - 950 cps

Flash Point 20’F

Coverage 170 ft. square/gal

Being one of the leading names in the industry, we are engaged in offering a high-quality Urja Butyl Tape. These tapes are manufactured at our highly advanced manufacturing plant by using the optimum quality materials and pioneering techniques. Furthermore, the offered tape is widely demanded in various industries for sealing two non-similar products such as metal, ceramic, plastic, concrete, glass, textiles, etc. In the market, our offered product is extensively appreciated for its temperature resistance, high sealing strength, and durability. This Butyl Tape can be purchased from us at nominal prices.

Our decades of industrial experience has enabled us to offer a wide array of Urja Lint Free Cloth. Made by using the quality materials and ultra-modern machinery at our manufacturing unit, it is known for its high strength, tear resistance, smooth texture, and durability. Free from impurities, these clothes are mainly used for cleaning and dressing purposes in hospitals and nursing homes. The offered cloth is extremely economical and is available in various sizes & colors.

 

Advantage :

• Best suited for absolutely lint-free applications
• All the dust particles that come in contact adhere to the tacky surface of the wipe
• Tacky nature of wipe does not allow dust to become air-borne and settle on other surfaces
• Enhanced appearance in your paint-shop due to whiteness of the wipe
• One single quick wipe will collect invisible and visible dust
• Ensures completely dust and fluff free surface

Our firm is engaged in offering Gun Applicator to the clients. These are manufactured by adopting the advanced machinery and equipment. This device is specially designed for the sealant applications and is used for the purpose of applying sealants or adhesives on various objects. We have enough capacity to deliver it in bulk quantities, within the promised time frame. Simple and handy, this gun offers both quality and performance. Clients can avail this gun from us at affordable price rate.

We are providing a wide array of Urja Underbody Coatings to our clients. Our offered coatings are manufactured by using the high-grade material and advanced techniques. Owing to the characteristics like weather resistance, excellent adhesion, and perfect finish, these coatings are widely used in the automobile industry for coating the vehicle bodies from underneath. Additionally, the provided Coating can be availed by our reputed clients at the competitive prices.

 

Sr.No Characteristics Result :

• Base Polymer Base 
• Colour Black
• Viscosities 200-250 Sec. (Ford Cup-B-4)
• Air-Drying Time Touch Dry- 20 Min
• Shelf Life 9 Months from Date of Packaging
• Temperature Stability 8°C to 56°C
• Very Good Adhesions to Bare Metal,  
• Solid Content 68-72 Percent
• UV-Resistance Very Good
• Weather ability Very Good
• Chemical Resistance Good
• Salt Spray (Test)
• As Per ASTM
• Hard Dry- 20 Hrs
• M-S And Various Substrate
• 425 to 500 Hrs Passes

We are able to achieve the full satisfaction of the clients by offering them a remarkable gamut of Urja Clean Cloth. The offered cloth is fabricated by using the superior quality fabric and the latest technology, as per the set international standards. Clean clothes find applications in various industrial processes, as these are used before the priming and powder coating for cleaning the surface. Our patrons can buy this cloth from us at reasonable prices. We also make this cloth available in various length and sizes in the market.

 

Details : Dust, fluff and grit particles are a major source of paint defects causing nibs, rough finishes and centers of weaknesses and corrosion. Long experience has shown that Clean-Cloth is the only safe and economical method ensuring completely dust - free surface onto which paint can be applied. Urja sealants private limited, manufacturer of Clean-Cloth, is the foremost manufacturer in India and is supplying Clean-Cloth to most Indian car manufacturers and to assembly plants throughout India. The impregnates that makes Clean-Cloth tacky are manufactured solely for us for our own use. They are to our own formulae and are chemically compatible with all modern paint finishes, non - acidic, non-drying, non-staining, will not subject to spontaneous combustion and uniform in tack and quality. Clean-Cloth is indispensable in vehicle paint shop. Clean-Cloths have many beneficial applications in most industrial production finishing processes. Clean-ClothS have many non - industrial applications too. Increasing number of decorators and model makers are using Clean-Cloth to help to achieve the perfect finish they strive for. Press shops and mould shops are now using Clean-Cloth to improve the finish on their jobs.

We are offering our customers a huge array of Urja Sound Dampening Strip. These steel strips are manufactured by our expert professionals making use of a self-adhesive elastomeric laminate. It is a dampening material, particularly suitable for the treatment of steel plates subjected to vibrations. The material can be applied on flat or slightly bent surfaces and provides long-lasting adhesion, excellent tack, chemical resistance, and weather resistance. The offered Strips are available with us at the market leading prices.

 ‘Bonding Agent” - a unique product that serves as an excellent bond on the RCC background and the internal gypsum based or any other plaster based wall lining. Its unique formula of Polymer, selected sand fillers, additives & polymers makes it coarse and improves its bonding properties.You need not physically develop the surface by hacking or any other methods. Bonding Agent is specially formulated as a plaster bonding agent for pre – treatment of smooth backgrounds. It contains an aggregate to provide a mechanical key.

Features • Excellent cohesive bond to RCC, Concrete and other surfaces. • Better adhesion /bonding due to lime/sand powder • Application in one coat • Green in color for easy identification • Contains fine aggregates for better mechanical, as well as chemical adhesion

 

Background Preparation Surface on which NEXO BOND IT application to be done should be clean, dry and free from mold oil or any other agents. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Just before application of NEXO BOND IT, prewetting must be done with the help of a brush/roller. Mixing Mix material properly with clean rod to properly distribute solid particles in the solution. Application Use good quality paint brush. The brush should be cleaned with enough water immediately after use. Apply with even distribution of fine aggregates over the surface. Allow it to dry thoroughly for around 24 hours.

DESCRIPTION & APPLICATION:  specially formulated resin based adhesive for bonding PVC-U pipe,  fittings and sheets. It is a fast setting and suited for PVC-U pipes with a diameter of 100 mm or less. Clear Glue is suitable for Non-Pressure applications in residential,  commercial and Industrial work such as Sewerage,  Drainage, Storm Water and electrical cable conduit.  Bonds are waterproof.  FEATURES & BENEFITS:  Manufacture to the highest Australians standards and quality assurance. So the CLEAR GLUE comes with a 10 year manufacture’s  warranty.  All containers are supplied with a natural bristles brush applicator cap to ensures easy application.  Proven product performance over several years in millions of applications around India.  PHYSICAL PROPERTIES:  Drying Time : 20 minutes  Joints strength to exceed : 0.1 MPa   to    100 kPa or 14.5 psi  Drying Time : 1 Day  Joints strength to exceed : 1 MPa   to   1000 kPa or 145 psi  Drying Time : 60 Days  Joints strength to exceed :  4 MPa   to   4000 kPa or 580 psi  Appearance:                              Clear Viscos Liquid  Specific Gravity @ 20’C, cPs :  500    -     700  Contents :                                  Contains more than 700g / L Hydrocarbon Liquids.  Shelf Life :                                 2 Years if unopened and stored in a cool, dry well ventilated place out of direct sunlight.  DIRECTIONS FOR USE:  PVC-U Pipe cement joining compound  PREPARING THE JOINT: 

1. Ensure pipe is cut square and remove burrs. 
2. To ensure correct assembly of joint, mark pipe at a distance equal to full socket depth. 
3. Test joint for dry fit. 
4. Clean pipe and inside of socket using a clean cloth freshly moistened with Priming fluids. This is  essential to ensure a satisfactory bond.

MAKING THE JOINTS: 

1. Shake or stir thoroughly Clear Glue before using 
2. Apply Clear Glue in full even coats to both surfaces firstly to the inside of socket, then to external surface of pipe end. 
3. Immediately assemble,  pushing the pipe home to the full depth of the sockets. 
4. Hold bounded joint in position for at least 30 seconds. 
5. Do not disturb for 5 minutes. 
6. Allow 24 hours curing before testing.  

 

We are offering a huge array of Urja Peelable Coatings OR Strippable Coating to our clients. The offered peelable sealant is manufactured in strict quality assurance systems and with the responsible care program. It is a high-quality multipurpose non-sag polymeric sealant that on exposure to atmosphere and humidity to form a durable elastomeric film which can simply be peeled away when required, without damage to the substrate surface. It is mainly used to protect components during the shipment and storage. Our esteemed clients can avail this Peelable Coating at the industry leading prices.

We are the main supplier of this product.

description:

nexo seal pu auto windshield glass sealant is a one part, high viscosity, polyurethane

based sealant which cures by the action of air moisture and changes the product from a

pasty to an elastomeric mastic. it offers excellent adhesion on glass and metal. it is most

suitable for bonding windshield inthe automotive industry.

features:

highmodulas&tensile strength

excellent adhesion on glass and metal surface

outstanding durability

permanently flexible

weatherproof

good uv resistance

uses:

sealing for automotive windscreen, windows and scuttles sealing in

automotive, caravan, ship bulding and railway industry

limitations:

avoidexposure to highlevel of chlorine.

avoidcontactwithalcohol andother solvent cleaners during cure.do not cure in

the presenceof curing silicone sealants.

do not apply when a moisture vapour transmission condition exists at timeof application, as

this can cause bubbling within the sealant.

page 2

joint design:

the specified sealant bead size should be calculated to comply with the compression and

extension capabilities of the sealant in relation to the anticipated joint width due to

expansion and contraction.

sealant widthshould never be less thansealant depth.

generally calculation of the width of pu sealant bead should be computed on the basis of

wide movement accommodation of 25%.

compression and extension capability minimum bead size should not less than 3mm to

accommodate movement.design joint depth of which ratio width becomes 0.5to 1.

joint depth maximun 15mm.

application:

surface must be clean and dry. remove all dirt, oil, grease, detergentsandloose

material.

mask smooth surface to simplify clean up.

cut tip off cartridge. cut nozzle to desired size at 45 angle. insertcartridgeinto

caulking gun.

insert cartridgeintocaulking gun.

push sealant aheadfor uniform bead.

tool within 15 minutes with joint nail or putty knife.

clean off excess sealant with m.e.k. or toluene before dry

do not apply the sealant below +5c. warm up the cartridges or sausageat 20c if

application by coldweather

specification:

type thixotropicpaste

color black

odour light

appearance non-sagging paste

specific gravity 1.5 to 1.6

shore a hardness 40-45

modulus at 100% e 0.8

skinning time 40 60 minutes

cure rate 3mm per 24 hours (23c & 50%r.h.)

application temperature +5c to +35c

storage temperature between (+5c +25c)

shelf life 12 months (+5c +25c) from date of packing.

caution:

uncured sealant may irritate eyes. in case of contact with eyes, flush withwater and

obtain medical advice.useinwell ventilatedarea.

shelf life:

use within 12 months from date of production. store in dry and coolconditionbetween5c&

30c

NEXO C LOCK CPVC Solvent Cement is yellow medium bodied solvent based high strength cement for CPVC pipe 

and fittings

SCH 40 & 80 types I & II up to 6’’ in diameter. Also for potable pressure pipe lines.

Product Advantages:

Self-curing

Waterproof

Faster to use

Strong and permanent bond

Resist temperatures over 180’F (82’C)

Flexible

Reinforced for pressure resistance

Uses:

Developed for flexible and rigid pipes, reinforced to resist every kind of pressure.

Products Data:

Finish Colour Golden Yellow

Solids % 25 + - 2

Open Time up to 30 second

Curing time 24 hours

Viscosity 900 - 950 cps

Flash Point 20’F

Coverage 170 ft. square/gal

Being one of the leading names in the industry, we are engaged in offering a high-quality Urja Butyl Tape. These tapes are manufactured at our highly advanced manufacturing plant by using the optimum quality materials and pioneering techniques. Furthermore, the offered tape is widely demanded in various industries for sealing two non-similar products such as metal, ceramic, plastic, concrete, glass, textiles, etc. In the market, our offered product is extensively appreciated for its temperature resistance, high sealing strength, and durability. This Butyl Tape can be purchased from us at nominal prices.

Our decades of industrial experience has enabled us to offer a wide array of Urja Lint Free Cloth. Made by using the quality materials and ultra-modern machinery at our manufacturing unit, it is known for its high strength, tear resistance, smooth texture, and durability. Free from impurities, these clothes are mainly used for cleaning and dressing purposes in hospitals and nursing homes. The offered cloth is extremely economical and is available in various sizes & colors.

 

Advantage :

• Best suited for absolutely lint-free applications
• All the dust particles that come in contact adhere to the tacky surface of the wipe
• Tacky nature of wipe does not allow dust to become air-borne and settle on other surfaces
• Enhanced appearance in your paint-shop due to whiteness of the wipe
• One single quick wipe will collect invisible and visible dust
• Ensures completely dust and fluff free surface

Our firm is engaged in offering Gun Applicator to the clients. These are manufactured by adopting the advanced machinery and equipment. This device is specially designed for the sealant applications and is used for the purpose of applying sealants or adhesives on various objects. We have enough capacity to deliver it in bulk quantities, within the promised time frame. Simple and handy, this gun offers both quality and performance. Clients can avail this gun from us at affordable price rate.

We are providing a wide array of Urja Underbody Coatings to our clients. Our offered coatings are manufactured by using the high-grade material and advanced techniques. Owing to the characteristics like weather resistance, excellent adhesion, and perfect finish, these coatings are widely used in the automobile industry for coating the vehicle bodies from underneath. Additionally, the provided Coating can be availed by our reputed clients at the competitive prices.

 

Sr.No Characteristics Result :

• Base Polymer Base 
• Colour Black
• Viscosities 200-250 Sec. (Ford Cup-B-4)
• Air-Drying Time Touch Dry- 20 Min
• Shelf Life 9 Months from Date of Packaging
• Temperature Stability 8°C to 56°C
• Very Good Adhesions to Bare Metal,  
• Solid Content 68-72 Percent
• UV-Resistance Very Good
• Weather ability Very Good
• Chemical Resistance Good
• Salt Spray (Test)
• As Per ASTM
• Hard Dry- 20 Hrs
• M-S And Various Substrate
• 425 to 500 Hrs Passes

We are able to achieve the full satisfaction of the clients by offering them a remarkable gamut of Urja Clean Cloth. The offered cloth is fabricated by using the superior quality fabric and the latest technology, as per the set international standards. Clean clothes find applications in various industrial processes, as these are used before the priming and powder coating for cleaning the surface. Our patrons can buy this cloth from us at reasonable prices. We also make this cloth available in various length and sizes in the market.

 

Details : Dust, fluff and grit particles are a major source of paint defects causing nibs, rough finishes and centers of weaknesses and corrosion. Long experience has shown that Clean-Cloth is the only safe and economical method ensuring completely dust - free surface onto which paint can be applied. Urja sealants private limited, manufacturer of Clean-Cloth, is the foremost manufacturer in India and is supplying Clean-Cloth to most Indian car manufacturers and to assembly plants throughout India. The impregnates that makes Clean-Cloth tacky are manufactured solely for us for our own use. They are to our own formulae and are chemically compatible with all modern paint finishes, non - acidic, non-drying, non-staining, will not subject to spontaneous combustion and uniform in tack and quality. Clean-Cloth is indispensable in vehicle paint shop. Clean-Cloths have many beneficial applications in most industrial production finishing processes. Clean-ClothS have many non - industrial applications too. Increasing number of decorators and model makers are using Clean-Cloth to help to achieve the perfect finish they strive for. Press shops and mould shops are now using Clean-Cloth to improve the finish on their jobs.

We are offering our customers a huge array of Urja Sound Dampening Strip. These steel strips are manufactured by our expert professionals making use of a self-adhesive elastomeric laminate. It is a dampening material, particularly suitable for the treatment of steel plates subjected to vibrations. The material can be applied on flat or slightly bent surfaces and provides long-lasting adhesion, excellent tack, chemical resistance, and weather resistance. The offered Strips are available with us at the market leading prices.

 ‘Bonding Agent” - a unique product that serves as an excellent bond on the RCC background and the internal gypsum based or any other plaster based wall lining. Its unique formula of Polymer, selected sand fillers, additives & polymers makes it coarse and improves its bonding properties.You need not physically develop the surface by hacking or any other methods. Bonding Agent is specially formulated as a plaster bonding agent for pre – treatment of smooth backgrounds. It contains an aggregate to provide a mechanical key.

Features • Excellent cohesive bond to RCC, Concrete and other surfaces. • Better adhesion /bonding due to lime/sand powder • Application in one coat • Green in color for easy identification • Contains fine aggregates for better mechanical, as well as chemical adhesion

 

Background Preparation Surface on which NEXO BOND IT application to be done should be clean, dry and free from mold oil or any other agents. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified. Just before application of NEXO BOND IT, prewetting must be done with the help of a brush/roller. Mixing Mix material properly with clean rod to properly distribute solid particles in the solution. Application Use good quality paint brush. The brush should be cleaned with enough water immediately after use. Apply with even distribution of fine aggregates over the surface. Allow it to dry thoroughly for around 24 hours.