The RA2300A, formerly known as the SOLTEC TA220-2300, from A&D is a data acquisition system with 8 physical slots capable of monitoring up to 16 channels. A range of plug-in amplifiers enable use of a variety of transducers and trigger events. Portable with a built-in printer...
Temperature Recorder for Cold Chain Compliance Record Reefer Temperature and Prove Cold Chain Compliance ORBCOMM’s Euroscan X3 temperature recorder is easy to use and provides proof of an uninterrupted cold chain from point of origin to destination for food, pharmaceuticals,...
Diagnostic Kit for EM Aware Monitor Combine with up to 6 EM Aware Monitors to help identify problematic ESD areas Software Included DATAQ® WinDaq Data Acquisition Software displays and stores real-time data captured by the EM Aware Monitor 20mA Analog Input Compatible with the...
Powerful and versatile data logger with built-in accels Transient capture or continuous recording Easy to configure with PC, set to record unmonitored Two Models - TSR Quick Reference Guide TSR PRO and TSR PRO-HB Lithium primary or rechargeable...
DataloggersDataloggers are an essential component in data acquisition systems. They can scan a wide variety of measurement sensors, perform any programmed calculations, convert the data to other units of measurement, and store the data in memory....
DISPLAY : 15” TFT Color LCD Display, 1024 x 768 XGA, SVGA resolution
Dimensions : (17.1” W x 11.2” H x 9.1” D)
Rugged, Portable and expandable, PCI PCI-Express multi-IO Data Acquisition System for Instrumentation and multiple applications TransPAC-6300AV, Field portable Industrial PC with OPTIONAL DATA acquisition BUS ANALYZERSIMULATOR , and 28V DC power...
The WDR-LE-Z2 is a receiver used to connect to the computer via a LAN or USB connection and to communicate with the WD-Z2 transmitters installed on the LE or LME signal towers....
If you’re working with equipment that does not have built in memory or the memory isn’t large enough for your reporting requirements, you can rent a data acquisition system. The acquisition systems ensure that data is logged for the duration of...
ncore Electronics manufactures a wide range of analog signal conditioning equipment, including strain gage and pressure amplifiers, frequency-to-voltage converters, thermocouple isolation amplifiers and anti-aliasing filters. When designing a...
Captures up to 8000 readings from Extech's Heavy Duty meters Selectable sampling rates (1 sec. to 99 hours) Complete with 4 AA batteries, PC software and cable...
The EZ-ZONE® RM controller simplifies thermal system management. The EZ-ZONE RM controller family is comprised of six module types: an integrated on-off or PID control, monitoring and overunder temperature limit module, a high-density on-off or PID control module, a...
This extremely versatile high-resolution seismic data acquisition system can be configured from 4 to 32 channels, all operating synchronously up to 2, 000 samples per second. The system is available in a variety of configurations: ♦ A field...
Acquisition Control Peripherals: Enclosure housing an extremely powerful RISC processojaghardware r to perform real-time calculations and control TPD operation. ACP may house as few as one measurement card or as many as 10. Communicates with Host...
Medium speed data acquisition system up to 10 kSsch. Completely modular and thus very flexible in configuration. Variety of different modules available for analog, digital, counter, CAN, GPS, USB, WiFi. Hot swap modules feature. Scalable from two to...
The TH-E (Temperature and Humidity) Recorder was developed to record dry bulb temperature from -25°F to +150°F and relative humidity from 0% to 100%. Temperature is recorded on a 3-12 inch space on the chart. The relative humidity is recorded on a...
his high-speed damage-control system was built around Arc Fault Detect and Continuous Thermal Monitoring (AFDCTM) from the Johns Hopkins Applied Physics Laboratory. When AFDCTM detects dangerous arc faults — powerful discharges of electricity...
We are offering data logger. 1. Overview in practical engineering tests, be able to use portable data acquisition recorder is very convenient. This product is mainly designed for power plants on-site vibration monitoring, vehicle vibration...
The electrocorder range is designed to allow electrical distribution companies to cost effectively monitor single and three phase loads. this product will allow voltage and load problems to be highlighted quickly for further investigation. setting up the electrocorder ec-6va is...
Protect your critical shipments from the factory or warehouse all the way to the last mile and easily monitor temperature excursions with durable, easy-to-use USB Data Loggers. With no need for readers or docking stations and simple data downloading...
Related Products
For Buyer 
For Seller 
Help 
