The Hubbell F Model is a compact, highly efficient, packaged instantaneous steam fired water heater perfect for new or replacement water heating requirements. This highly efficient Hubbell heater requires no large storage tank, is easily installed and requires minimal floor...
Springs and grommets : Springs and grommets are spaced about 2” apart. Each end of the spring is attached to a grommet securing it to the cylinder.
D rings : D rings are a solid wire formed in the shape of a D. They are best suited for medium to large heaters. A strap vulcanized to the heater is looped through the rings.
Pressure Sensitive Adhesive : Also called PSA, is the simplest mounting method. Just peel the protective paper from the back of the heater and stick it to your surface. PSA is rated to a continuous temperature of 300°F and intermittent usage up to 400°F. PSA is only recommended f
Boot hooks and lace : Boot hooks and lace are the most common mechanical mounting method. Boot hooks are usually positioned 1.25”-2” apart along the length of the heater. The high temperature lace (1000°F) locks the heater in place similar to lacing a boot.
Field applied adhesive : Field applied adhesive is more difficult to apply than PSA, but if done properly produces a superior bond. Wattco can supply a room temperature curing RTV rated to 400 deg F. After applying a thin film between the heater and the surface, a roller sho
Our direct-fired heaters set up quickly and are exceptionally quiet during operation. They have a direct spark ignition system, a thermostatic control and some are ductable. Available in propane or natural gas. Used in well ventilated applications requiring a lot of heat....
2 Heating Position Wattage 400800W Humidifier function to prevent dryness Water Tank Capacity 300 ml Tip Over Cut-off in case Heater Falls High Grade Reflectors Quartz Tube Heating Element Cool Touch Body Cord Winding Arrangement ISI Mark 1 Year Warranty...
AccuTherm air duct heaters are designed to heat moving air and gases up to 1200 F. Duct Heater Options – All Series Moisture or explosion proof wiring enclosure Gas tight construction on elements to flange High limit thermocouple attached to...
Heavy-duty construction Incoloy elements mounted to .25” or .375” steel plate Terminal housing of 18 ga. Steel Aluminized steel and stainless steel support rods Insulated terminal housing for cooler operation Popular applications of drum heaters...
Mi-PlusTM is a mineral insulated band heater designed for applications that require high watt density andor high operating temperatures. Mi-Plus band heater has a thin low profile cross section using all stainless steel sheath material. The clamping...
Mica heaters are an excellent choice when cost and performance supersede substrate flexibility. Mica is a rigid substrate able to withstand very high temperatures and are suited for applications up to 500°F (260°C). Mica heaters can be configured...
TRENT industrial oil immersion heaters are used for oil preheating, oil baths, wax and other heat transfer fluids. Industrial oil immersion heaters are completely covered with fluid, used on correct voltage and kept free of carbonization. These...
The Hotwatt Standard Band Heaters are manufactured in one or two piece constructions with maximum inside diameters of 11 12" and 22 12" respectively. Three or more sections are employed when heaters of larger diameters are needed (as for blown film...
The MI band heater from Watlow® is a high-performance heater. Its performance and name are derived from Watlow’s exclusive mineral insulation - a material with much higher thermal conductivity than mica and hard ceramic insulators used in...
Radiant tube heaters for harsh environments and even outdoor use. Aluminized tubing and optional stainless steel reflector. Harsh environment infrared tube heaters by roberts-gordon...
The rugged, efficient, open Frame Duct Heaters offer you the capability to heat large volumes of air with fast warm-ups and cool-downs. Our open design provides low pressure drops with no build up of excessive temperatures and the low static...
Rowe equipment Inc. offers top of the line, high density Cartridge Heaters for the Plastics Processing Industry. The Rowe equipment Cartridge Heaters has an extraordinarily compact design in order to produce optimum heat transfer, and it has the...
Durable and precise silicone rubber heaters are available in a virtually unlimited range of configurations and geometry's. Silicone rubber heaters provide highly efficient heat transfer over a wide temperature range. Lightweight and flexible, the...
Keeping in-line with the globally accepted standards, the raw material used for production is of high-grade. Thus, we always keep a check on the final product to make sure that the same is defect free. The major concern of our organization is to...
Rama’s cartridge heaters are the highest quality available. The Rama®Rod heaters are the result of many years experience perfecting high watt-density elements which are capable of long life at elevated temperatures. Rama®Rod heaters are...
UL rated with a maximum continuous operating temperature of 200°C (392°F) Thermally stable to 232°C (450°F) continuous operation Intermittent temperatures up to 316°C (600°F) Remains flexible at -57°C (-70°F) High Dielectric Strength 400 to...
Durex's silicone rubber heaters take advantage of the unique properties of silicone rubber to provide flexible heating elements of unparalleled performance. Silicone rubber is calendared onto fiberglass cloth in a variety of thicknesses and...
Heavy-duty construction Incoloy elements mounted to .25” or .375” steel plate Terminal housing of 18 ga. Steel Aluminized steel and stainless steel support rods Insulated terminal housing for cooler operation Popular applications of drum heaters...
Silicone rubber heaters are suited for large-size, industrial and ruggedized applications. They are constructed of rugged, flexible elastomer material with excellent temperature properties. Benefits of Silicone Rubber Heaters: High reliability in a...