Vandana Industries

Bhavnagar, Gujarat

• Min. Order (MOQ) 1 Piece(s)
• 2) Tapping Capacity 19mm
• 15) Over all Height with Guard 1650
• 3) Column Diameter 129mm
• 1) Drilling Capacity 25mm
• 4) Max. Dist. Spindle Nose to Table 615mm
• 7) Taper in Spindle MT-3
• 5) Max. Dist. Spindle Nose to Base 815mm
• 6) Dist. from Spindle Center to Pillar Surface 700mm
• 10) Range of Speed 116 to 2880 rpm
• 8) Spindle Travel 210mm
• 9) No. of Speed 8
• 11) Tilting 360
• 12) Table Size 275x200x200mm
• 16) V-Belt Section B-38
• 14) Over all Base Size 1010x605
• 13) Base Size (Machined Area) 1010x605mm
• 18) Weight (Approx) 450kg
• 17) Motor 1440 rpm 1HP & 0.5HP

Additional Information:

• Min. Order (MOQ) 1 Piece(s)
• 16) V-Belt Section B-48
• 15) Over all Height with Guard 1850mm
• 14) Over all Base Size 1250x730mm
• 1) Drilling Capacity 38mm
• 2) Tapping Capacity 32mm
• 3) Column Diameter 170mm
• 5) Max. Dist. Spindle Nose to Base 960mm
• 4) Max. Dist. Spindle Nose to Table 680mm
• 7) Taper in Spindle MT-4
• 6) Dist. Spindle Center to Pillar Surface 950mm
• 8) Spindle Travel 260mm
• 9) No. of Speed 8
• 10) Range of Speed 72 to 2625 rpm
• 11) Tilting 360
• 12) Table Size 400x280x280mm
• 11) Tilting 1250x730mm
• 17) Motor 1440 rpm 1.5HP & 0.75HP

Additional Information:

• Min. Order (MOQ) 1 Piece
• 2) Tapping Capacity 30
• 17) Motor 1440rpm 1.5HP
• 1) Drilling Capacity 38
• 13) Base Size (Machined Area) 400x350
• 14) Over all Base Size 660x440
• 3) Column Diameter 106
• 9) No. of Speed 8
• 12) Table Size 380x380
• 7) Taper in Spindle MT-4
• 15) over all Height with Guard 1750
• 5) Max. Dist. Spindle nose to Base 1000
• 8) Spindle Travel 255
• 6) Dist. from Spindle center to Pillar Surface 285
• 4) Max. Dist. Spindle nose to Table 650
• 10) Range of Speed 79 to 2024
• 11) Tilting Working Tabble Fixed
• 16) V-Belt Section B-58

Additional Information:

• Min. Order (MOQ) 1 Piece
• 9) No. of Speed 8
• 8) Spindle Travel 177
• 7) Taper in Spindle MT-3
• 6) Dist. from Spindle center to Pillar Surface 225
• 5) Max. Dist. Spindle nose to Base 1035
• 4) Max. Dist. Spindle nose to Table 700
• 3) Column Diameter 89
• 2) Tapping Capacity 19
• 1) Drilling Capacity 25
• 12) Table Size 300x300
• 13) Base Size (Machined Area) 320x285
• 14) Over all Base Size 560x370
• 15) Over all Height with Guard 1675
• 10) Range of Speed 116 to 2880
• 11) Tilting Working Table 360
• 16) V-Belt Section B-52
• 17) Motor 1440drpm 1HP

Additional Information: