Our Products
FEATURES
Contents: Hydraulic Unit, 2/3 Jaws Cross Head, 3 Legs/Jaw with Nuts and Bolds and attractive carry case.
NOTE: Compare the "Reach" and "Spread" of the pulling job with that of the pullers listed. The Puller selected must have dimension equal to or greater than those of the job.
All Dimensions in mm unless specified.
TECHNICAL SPECIFICATION | |||||||||||
Capacity | Model | Stroke | Reach | Spread | Cylinder | Leg/Jaw Tip | Weight | ||||
Tonnes | MM | MM | MM | MM | MM | MM | MM | MM | MM | Kgs. | |
S | R | P | A | B | C | D | E | F | |||
4 | PM400 | 60 | 185 | 255 | 42 | 22 | 84 | 11 | 6 | 22 | 6.7 |
6 | PM600 | 70 | 220 | 330 | 45 | 23 | 94 | 13 | 10 | 22 | 7.4 |
8 | PM800 | 85 | 230 | 350 | 50 | 25 | 122 | 11 | 10 | 25 | 8.2 |
12 | PM1200 | 85 | 270 | 375 | 60 | 28 | 118 | 14 | 10 | 29 | 10.9 |
features:
Additional Information:
Delivery Time : IMMEDIATE
features:
Additional Information:
Delivery Time : IMMEDIATE
SL. NO. | MODEL | MODEL : VCYPM 1000 | |
1 | CAPACITY, KG | 1000 | |
2 | WIDTH OVER FORM, MM | W1 | 540 |
3 | FORK LENGTH, MM | L1 | 1150 |
4 | FORK WIDTH, MM | W2 | 160 |
5 | LOWERED HEIGHT, MM | H1 | 85 |
6 | HYDRAULIC LIFT, MM | 715 | |
7 | MAXIMUM HEIGHT, MM | H2 | 800 |
8 | FRONT WHEEL | SINGLE | |
9 | WHEEL MATERIAL (FRONT AND REAR) | POLYURETHANE | |
10 | HAND CONTROL | 3-POSITION | |
11 | DIA OF STEERING WHEEL, MM | 180 | |
12 | DIA OF FRON WHEEL, MM | 80 | |
13 | LIFT PER STROKE, MM | 35-40 | |
14 | GROUND CLEARANCE, MM | 15 | |
15 | NET WEIGHT IN KGS (APPROX.) | 105 |
Purpose/ Proposed use of Product
This Hydraulics Pallet Truck is suitable for handling Pallets, Rolls, Sheets and other heavy loads. It can be used for loading, unloading and transfer of loads. It can be used in all types of workplaces where efficient material handling is desired. It is best t solution of short transportation for heavy weight goods in narrow pathways.
Product Description
These pallet trucks are designed to carry heavy loads with minimum effort. It reduces operator fatigue with considerable saving in time. Frame is ruggedly built from selected rolled steel and steel plates and is electrically welded. It is simple to use. Easy pumping actions by caring handless raises the fork as per the job need and can be conveniently lowered by hand operated release valves. Tandem wheel increase the trucks contact area with the floor making for better weight distribution under all load conditions & it also gives a smooth ride over irregular surfaces.
Users
Papers mills, Textile Mills, Stores, Warehouses, General Maintenance Work, Steel Plant, Automobile Plants etc.
Features/Advantages.
MAINTENANCE
All hydraulic controls ensure easy and low cost maintenance. Hydraulic unit is easily detachable from the frame for maintenance or can be instantly replaced if necessary. Spares & services country wide.
AFTER SALES SERVICE
We provide excellent after sales support. We will take care spares parts availability, service personnel availability and training in use of product.
Additional Information:
Delivery Time : IMMEDIATE
MODEL | UNIT | VCYPB-2500 | VCYPB-3000 |
CAPACITY, MAXIMUM | KG | 2500 | 3000 |
MINIMUM FORK WEIGHT, H1 | MM | 80 | 80 |
HYDRAULIC LIFT, H3 | MM | 120 | 120 |
MAXIMUM FORK HEIGHT, H2 | MM | 200 | 200 |
OVERALL FORK WIDTH, B | MM | 540 | 680 |
FORK GAP, B2 | MM | 220 | 360 |
FORK WIDTH, B1 | MM | 160 | 160 |
FORK LENGTH, L1 | MM | 1220 | 1220 |
OVERALL LENGTH, L | MM | 1540 | 1650 |
OVERALL HEIGHT, H | MM | 1170 | 1170 |
FRONT WHEEL DIA | MM | 80 | 80 |
STEERING WHEEL DIA | MM | 180 | 180 |
WEIGHT(APPROX) | KG | 90 | 95 |
WHEEL, STANDARD | POLYURETHANE | POLYURETHANE |
4 TON
HYDRAULIC PRESS WITH HAND PUMP AND HOSE
CAPACITY 4 TON
STROKE 120 MM
OVERALL SIZE 580 X 250 X 165 MM
WEIGHT 33.5 KG
A work platform is a device used to provide temporary access for people or equipment to inaccessible areas, usually at height. They are generally used for temporary, flexible access purposes such as maintenance and constructino work or by firefighters for emergency access.
Uses
Installation and maintenance of electric lines, overhead lights, bridges, buildings, crane maintenance, aircraft maintenance and many many more.
Control
Lift functions of an work platform are controlled by an operator, who can be situated either on the work platform itself, or at a control panel at the base of the unit.
Features of Work Platform
Additional Information:
Delivery Time : IMMEDIATE FOR STOCK PRODUCTS
TECHNICAL SPECIFICATION
|
Product Description
An aerial work platform is a device used to provide temporary access for people or equipment to inaccessible areas, usually at height. They are generally used for temporary, flexible access purposes such as maintenance and construction work or by firefighters for emergency access.
Uses
Indoor and Outdoor Lighting Maintenance, Renovation Work, Painting Applications, Industrial, HVAC Installation and Acoustical and many more uses.
Features
Control
Lift functional of AWP is controlled by an operator, who can be situated either on the work platform itself, or at a control panel at the base of the unit.
Controls vary by model, but are generally buttons. The type and complexity of these will depend on the functions the platform is able to perform. The controls can control features such as : UP, DOWN and STOP.
Checklist
TECHNICAL SPECIFICATION | ||||
AERIAL WORK PLATFORM - SINGLE MAST | ||||
Details | Unit | Model AWP – SM6 |
Model AWP – SM8 |
Model AWP – SM10 |
CAPACITY | KG | 150 | 125 | 125 |
MAXIMUM HEIGHT, A | MM | 6000 | 8000 | 10000 |
WORKING HEIGHT, B | MM | 7700 | 9700 | 11700 |
PLATFORM SIZE, C X D | MM | 620X630 | 620X630 | 620X630 |
FOOT PRINT, E X F | MM | 1940X1780 | 2020X1850 | 2030X1860 |
INPUT ELECTRICAL SOURCE | AC – V | 220 | 220 | 220 |
DC – V | 24 | 24 | 24 | |
BATTERY | V/AH | 2X12/60 | 2X12/60 | 2X12/60 |
BATTERY CHARGER | V/A | 24/12 | 24/12 | 24/12 |
LIFT MOTOR PUMP | AC(V/KW) | 220/0.75 | 220/0.75 | 220/0.75 |
DC(V/KW) | 24/2 | 24/2 | 24/2 | |
OVERALL SIZE L X W X H | MMxMMxMM | 1350X840X1800 | 1400X840X2000 | 1430X840X2100 |
WEIGHT, Kg | AC | 300 | 370 | 410 |
DC | 380 | 430 | 480 | |
FEATURES
TECHNICAL SPECIFICATION
CAPACITY | MODEL | SPREAD | REACH | STROKE | WEIGHT |
TONNES | MM | MM | MM | KG | |
5 | VYL-5 | 200 | 140 | 50 | 9.75 |
10 | VYL-10 | 250 | 160 | 50 | 11.0 |
15 | VYL-15 | 300 | 180 | 50 | 12.5 |
20 | VYL-20 | 350 | 200 | 50 | 18.0 |
Product Description
An aerial work platform is a device used to provide temporary access for people or equipment to inaccessible areas, usually at height. They are generally used for temporary, flexible access purposes such as maintenance and construction work or by firefighters for emergency access.
Uses
Indoor and Outdoor Lighting Maintenance, Renovation Work, Painting Applications, Industrial, HVAC Installation and Acoustical and many more uses.
Features
Control
Lift functional of AWP is controlled by an operator, who can be situated either on the work platform itself, or at a control panel at the base of the unit.
Controls vary by model, but are generally buttons. The type and complexity of these will depend on the functions the platform is able to perform. The controls can control features such as : UP, DOWN and STOP.
Checklist
TECHNICAL SPECIFICATION | |||||
AERIAL WORK PLATFORM - DUAL MAST | |||||
Details | Unit | Model AWP – DM6 |
Model AWP – DM8 |
Model AWP – DM10 |
Model AWP – DM10 |
CAPACITY | KG | 300 | 300 | 250 | 250 |
MAXIMUM HEIGHT, A | MM | 6000 | 8000 | 10000 | 12000 |
WORKING HEIGHT, B | MM | 7700 | 9700 | 11700 | 13700 |
PLATFORM SIZE, C X D | MM | 1090X600 | 1210X1850 | 1450X600 | 1450X600 |
FOOT PRINT, E X F | MM | 1950X1850 | 1950X1850 | 2130X1980 | 2550X2500 |
INPUT ELECTRICAL SOURCE | AC – V | 220 | 220 | 220 | 220 |
DC – V | 24 | 24 | 24 | 24 | |
BATTERY | V/AH | 2X12/60 | 2X12/60 | 2X12/60 | 2X12/60 |
BATTERY CHARGER | V/A | 24/12 | 24/12 | 24/12 | 24/12 |
LIFT MOTOR PUMP | AC(V/KW) | 220/0.75 | 220/0.75 | 220/0.75 | 220/0.75 |
DC(V/KW) | 24/2 | 24/2 | 24/2 | 24/2 | |
OVERALL SIZE L X W X H | MMxMMxMM | 1440X840X1800 | 1560X840X1920 | 1790X840X1920 | 1790X840X2140 |
WEIGHT, Kg | AC | 520 | 620 | 720 | 820 |
DC | 550 | 650 | 750 | 850 |
PRODUCT | MODEL | CAPACITY | MINIMUM HEIGHT | MAXIMUM HEIGHT | NET WEIGHT | |
TONNES | MM | KGS | ||||
SHOP CRANE | V62101 | 1 | 380 | 1800 | 82 | |
SHOP CRANE | V62102 | 2 | 380 | 2400 | 92 |
PRODUCT | MODEL | CAPACITY | OVERALL SIZE | STROKE | WORKING | NET WEIGHT | |
TONNES | MM X MM X MM | MM | KGS | ||||
SHOP PRESS | V61112 | 12 | 510W X 500D X 1230H | 125 | 0 TO 700MM | 43 | |
SHOP PRESS | V61120 | 20 | 750W X 650D X 1510H | 145 | 0 TO 1000 MM | 100 |