A specially developed fiberglass sleeving, braided and coated with silicone elastomer and vulcanized for strength, SRG 001 provides excellent dielectric strength, resistance to high temperatures and also possesses very good elasticity and flexibility. SRG 001 is ideal for witting insulation purposes on electrical machinery, appliances, and collected strands of wires, transformers and alternators. It has a wide range of dielectric strength varying from 1.5 KV to 12 KV

This generic term applies to all INSULATED SINGLE STRAND cables. It is essential to use this type of cable when the skin effect must be minimized and the electrical performance improved when producing high and low frequency windings with a high harmonic content.

These braids are manufactured from ø 0, 05 to 0, 20 tinned or plain copper wires from 1 sq mm to 350 sq mm. We have a high possibility of achievements, as you can see from the outline in the table here below, according to standard DIN 46444.

When a higher dielectric properties and failsafe performance are needed, VG-501 provides the solution. VG-501 is a fiberglass braided sleeving, which is first coated with a layer of polyvinyl chloride resin and then thermo set to provide B grade insulating sleeving. Softness, high dielectric properties, heat resistance and safety are some advantages of VG-501 fiberglass sleeving and it is useful as wiring insulation for Grade B electrical machinery, wireless sets and domestic electric appliances.

These braids are manufactured from 0.25 mm² to 180 mm² from ø 0.05 - 0.07 - 0.10 - 0.15 - 0.20 wire

This generic term applies to all INSULATED SINGLE STRAND cables. It is essential to use this type of cable when the skin effect must be minimized and the electrical performance improved when producing high and low frequency windings with a high harmonic content. Developments in power electronics have considerably widened the applicability of these cables: filtering and smoothing inductances (inverters, rectifiers etc...) Instrumentation transformers H.V. system inductances. Technical Specifications These cables are produced from SINGLE ENAMELLED STRANDS: Class B or F, suitable for soldering Class H, which may be tinnable or not. The wires may be round or rectangular after rolling (to produce compact windings) and additional insulation can be applied by: wrapping (film, tape, felt, class B, F or H) textile braid (natural or synthetic). Ranges Available Single strands:  0.035 mm and upwards Number of strands: from 3 to several thousand Forms: multi strand plies, multi ply cables, layered cables, flat cables Sections: round, from 0.10 to 1000 mm2 rectangular, from 10 to 500 m

A specially developed fiberglass sleeving, braided and coated with silicone elastomer and vulcanized for strength, SRG 001 provides excellent dielectric strength, resistance to high temperatures and also possesses very good elasticity and flexibility. SRG 001 is ideal for witting insulation purposes on electrical machinery, appliances, and collected strands of wires, transformers and alternators. It has a wide range of dielectric strength varying from 1.5 KV to 12 KV

Those items are an alternative with the advantage of not opening when cutting. We can manufacture them from tinned or untinned wire, mainly from ø 0.05 and 0.07 wire It is possible to manufacture them with different compositions 8 - 12 - 16 or 24 spindles on requests and in the following quantities.

This generic term applies to all INSULATED SINGLE STRAND cables. It is essential to use this type of cable when the skin effect must be minimized and the electrical performance improved when producing high and low frequency windings with a high harmonic content.

The manufacture of coated and impregnated insulating hoses for thermal, electrical and mechanical protection has a long tradition at our company. We meet the high quality requirements because our production and quality assurance system are based on the guidelines of DIN ISO 9001. In the automotive sector, it is taken for granted that we have maximum flexibility and are able to adapt to sector specific standards   Insulating hose HS8 The insulating hose type HS8 distinguishes itself by high wall thickness and consistent silicon rubber coating. Application temperature 260° C / 500° F Peak time temperature 1000° C / 1832° F Basic material: E-Glass, braided or knitted Cover: high performance silicon rubber   Field of application Wire, channel and cable insulation against high temperature and molten metal splashes Special features No affection by molten splashes No residue accumulating, even if the surface of the insulating hose is destroyed No burning risk when touching the material High resistance against hydraulic liquids, fuel or grease oil  Applications Electric motors and transformers Household appliances Protected switches Cable packaging , Gas exhaust systems Mechanical engineering and systems

This generic term applies to all INSULATED SINGLE STRAND cables. It is essential to use this type of cable when the skin effect must be minimized and the electrical performance improved when producing high and low frequency windings with a high harmonic content. Developments in power electronics have considerably widened the applicability of these cables: filtering and smoothing inductances (inverters, rectifiers etc...) Instrumentation transformers H.V. system inductances. Technical Specifications These cables are produced from SINGLE ENAMELLED STRANDS: Class B or F, suitable for soldering Class H, which may be tinnable or not. The wires may be round or rectangular after rolling (to produce compact windings) and additional insulation can be applied by: wrapping (film, tape, felt, class B, F or H) textile braid (natural or synthetic). Ranges Available Single strands:  0.035 mm and upwards Number of strands: from 3 to several thousand Forms: multi strand plies, multi ply cables, layered cables, flat cables Sections: round, from 0.10 to 1000 mm2 rectangular, from 10 to 500 m

When a higher dielectric properties and failsafe performance are needed, VG-501 provides the solution. VG-501 is a fiberglass braided sleeving, which is first coated with a layer of polyvinyl chloride resin and then thermo set to provide B grade insulating sleeving. Softness, high dielectric properties, heat resistance and safety are some advantages of VG-501 fiberglass sleeving and it is useful as wiring insulation for Grade B electrical machinery, wireless sets and domestic electric appliances.