GST : 24AAGCV4593E1Z7
Write a Review
Our Products
Testing Equipments
2 Products availableAnalyzers And Analytical Instruments
2 Products availableIndustrial Machinery
1 Products availableOur Complete range of products are Digital Iron Loss Tester VDW 2065, Digital Iron Loss Tester VDW-2065A, Digital Epstein Tester VET 1608A, High Voltage Tester VHT-05 and Vacuum Interrupter Tester - VIT.
veer make digital iron loss tester vdw - 2065a is protable & easy to use instrument which is very useful to find watt loss of electrical steel immediately. Internationally accepted standard method of testing is epstein frame method but that metod needs 30mm x 305mm size & min. 250g weight of material. Stamping & lamination can not be teted on epstein frame because of size. So, we have designed a direct reading type single sheet tester called digital iron loss tester vdw-2065a. It provides very fast testing of final products like stamping. Ei & other lamination etc.
veer make digital iron loss tester vdw - 2065a is protable & easy to use instrument which is very useful to find watt loss of electrical steel immediately. Internationally accepted standard method of testing is epstein frame method but that metod needs 30mm x 305mm size & min. 250g weight of material. Stamping & lamination can not be teted on epstein frame because of size. So, we have designed a direct reading type single sheet tester called digital iron loss tester vdw-2065a. It provides very fast testing of final products like stamping. Ei & other lamination etc.
Additional Information:
Delivery Time : 5-6 day
the epstein tester is used to test the electrical steel. The epstein tester is according to the standards astm: 343, is: 649 & iec: 60404. Epstein bridge comes along with epstein tester to insert the electrical strips. The epstein tester measures all magnetic parameters such as iron losses (watt/kg), ac magnetizing force & peak magnetizing force (at/m), ac permeability & peak permeability, etc. The epstein tester assures the quality of the electrical steel to its manufacturers. The epstein tester is very much useful for the electrical steel, motor, pump and transformer manufacturers. Software is provided with the epstein tester to generate the test results which will provide the readings of the magnetic parameters along with important graphs such as b-h curve, flux density v/s iron losses & many other important graphs.
| GENERAL SPECIFICATIONS | ||||||
| 1. | Bridge Size | 25 cm ( 94 cm mean length) | ||||
| 2. | Number of Turns | Primary = Secondary = 700 turns | ||||
| 3. | Specimen size | 30 mm x 280 to 305 mm | ||||
| 4. | Specimen weight Capacity | 500g | 1000g | |||
| 6. | Dimension in cm ( W x D x H) | 320 mm x 345 mm x 115 mm | 320 mm x 345 mm x 120 mm | |||
| 5. | Bridge Weight | 6.7 kg approx.(For 500Kg Epstain Bridge) | 7.3 kg approx.(For 1Kg Epstain Bridge) | |||
| 7. | Air Flux compensating coil | Mounted inside the Bridge. | ||||
| ACCURACY | ||
| Parameter | VET-1608 FSD ± % | Accuracy Required ASTM - 343 ± % |
| RMS Voltmeter | ± 0.10% | ± 0.25% |
| RMS Ammeter | ± 0.10% | ± 1.00% |
| Watt meter | ± 0.10% | ± 0.25% |
| Flux Voltmeter | ± 0.20% | ± 0.25% |
| Peak Ammeter | ± 0.20% | ± 1.00% |
| Frequency | ± 0.05% | ± 1.00% |
STANDARD ACCESSORIES
| STANDARD ACCESSORIES | ||
| Sr. No. | Accessories | Qty. |
| 1. | 25 cm Epstein Bridge | 1 |
| 2. | Connection Wire for Brige | 4 |
| 3. | Corner Weight | 4 |
| 4. | AC Mains Power Supply Wire | 1 |
| 5. | RS-232 serial interface wire | 1 |
| 6. | USB interface wire | 1 |
| 7. | Calibration Certificate (Our Lab) | 1 Each |
| 8. | Operation Manunal, Software CD | 1 |
| 9. | Standard Test Sample Strips with Report (Our Lab) | 1 Set |
veer make high voltage tester is connected to the conductor (device under test) and erath terminal should be connected so safety ground (earth gorund). If the insulation between the two is adequate, then the application of a large voltage difference between the two conductor separated by the insultator would result in the flow of a very small current. Although this small current is acceptable, no breakdown of either the air insulation or the solid insulation should take place. It device under test draws more current than per set value then tripping will be occurred and test will be off.in this way we can find problem in the insulation of device under test.
Veer Electronics make Vacuum Interrupted Tester test the Vacuum Interrupted Integrity by applying a Pulse DC Voltage across the Interrupter under Test. When this Voltage is applied to the Vaccum Interrupter, If Interrupter Is defective then an electronic. Buzzer gives Audio indication as well as Red Colour Fault LED also gives Visual indication of fault.
Bhavin Shah (Veer Electronics Pvt. Ltd.)
Plot No. B-45, GIDC Electronics Estate, Sector 25, Gandhinagar, Gujarat - 382024
Share us via
View Contact Number 
