Our Products
Our offered Product range includes BLISTER CARTRIDGE / INK ROLLER, CODING CARTRIDGE / INK ROLLER, HOT MELT CARTRIDGE / INK ROLLER, NON-POROUS CARTRIDGE / INK ROLLER and POROUS CARTRIDGE / INK ROLLER.
Vilax aluminum body cartridge are made for Blister packaging machine, FFS machines & Coding machines. The absorbing material used is POLY POROUS in various microns varying from 1 micron to 25 micron depending on requirement of customers. The absorbing capacity of these cartridge is quite high & the cartridges are hard so the impression is good. Cotton cloth knitted sleeves (Covering ) are used to avoid direct contact of stereo with roller. The cartridges are made in various ID, OD's & Length depending on customer requirement . The max OD can be up to 65 mm, Length up to 1 meter. ID can be adjusted as per requirements.
Coding Ink Cartridges are manufactured from special imported bonded cellulose Fibres, which have a solid highly durable porous structure. It can withstand temperature up to 120 degree C. The ink cartridge are made from 5 micron material have much high absorbing capacity of ink and reinking is not frequent as in woolen felt cartridge/poly porous cartridges. The Cartridges are suitable for various coding Machines/ FFS Machines and other marking system attached to different packing machines available in market. The roller are covered with cotton sleeves to prevent sticking of fibres to the rubber/polymer marking stereos and to the surface to be marked.
Item Code:VEPL-HMR-2235
Hot Melt Ink Rolls are designed to be used in different high speed date coding & lot number marking printers which use stamps affixed to a rotating drum which contacts a heated urethane roll impregnated with an ink/paraffin formulation. Once the print head is covered with the hot ink, the rotating drum deposits the ink mixture on the label or packaging substrate.
Vilax Non-Porous Inking Cartridges Made from specially formulated material, it prevents over-inking by releasing just the right amount ink for each impression. For non Porous cartridges, use few drops of specially matched solvent for reactivation in case of cartridge drying. It has an extended life under normal use. Solvent Base Marking Inks are used for Charging the Cartridges. Available in a variety of Size 2", 3" and 6" to fit most Grooved base Coders and Marking machines to mark on Non-absorbant surface Like Plastic, HDPE Bags, Drums, Laminated Surface, Metals etc.
Vilax Porous Inking Cartridges Made from specially formulated material, it prevents over-inking by releasing just the right amount ink for each impression. It has an extended life under normal use.Water Base Marking Inks are used for Charging the Cartridges. Available in a variety of Size 2", 3", 4", 5", 6" and 8" to fit most Grooved base Coders and Marking machines for marking on any absorbant Surface like Shipper Cartons, Wooden Boxes, Paper Bags, Cement Sheets, Plywood, Paper Core/Tube, etc.
Item Code:VEPL-SPC-12
Vilax Sponge Inking Cartridges Made from specially formulated material, it prevents over-inking by releasing just the right amount ink for each impression. It has an extended life under normal use.Water Base Marking Inks are used for Charging the Cartridges. Available in a variety of Size 2", 3", 4", 5", 6" and 8" to fit most Plywood Rollers and Marking machines for marking on any absorbant Surface like Plywood sheets, Laminate Sheets, etc.
Vijaylaxmi Equipments Private Limited. (Vijaylaxmi Equipments Private Limited.)
7, D Block, Pooja Residency, Near Reliance Tower, Anand Nagar, Upnagar, 422 006 MH, , Nashik, Maharashtra, India
Share us via
Write a Review
