Shree Sambhav Alloys

Bhuleshwar, Mumbai, Maharashtra

Titanium alloys are metals that contain a mixture of titanium and other chemical elements. Such alloys have very high tensile strength and toughness (even at extreme temperatures). They are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures. However, the high cost of both raw materials and processing limit their use to military applications, aircraft, spacecraft, medical devices, highly stressed components such as connecting rods on expensive sports cars and some premium sports equipment and consumer electronics. Although "commercially pure" titanium has acceptable mechanical properties and has been used for orthopedic and dental implants.

Grades of Titanium

• Titanium Grade 1 is the most ductile and softest titanium alloy. It is a good solution for cold forming and corrosive environments. ASTM/ ASME SB-265 provides the standards for commercially pure titanium sheet and plate.
• Titanium Grade 2 has moderate strength with excellent cold formability, weldability. This titanium also has excellent resistance to high oxidization. It's available forms are a seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, and flanges.
• Titanium Grade 3 is an unalloyed titanium grade (CP titanium = commercially pure titanium) with medium oxygen content. characterized by high strength. The grade is typically used for matrix-plates i-shell and tube heat exchangers.
• Titanium Grade 4 is a much stronger version of Grades 2 and 3 with cold formability and reduced ductility. It's available forms are a seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, and flanges.
• Titanium Grade 5 also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti). Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld, and fabricability.
• Titanium Grade 7 contains 0.12 to 0.25% palladium. This grade is similar to Grade 2. The small quantity of palladium added gives it enhanced crevice corrosion resistance at low temperatures and high pH. Grade 7 also has excellent weldability and formability.
• Titanium Grade 9 / Titanium 3AL2.5V is a medium strength alloy with good weldability and cold fabricability for mildly reducing to mildly oxidizing media. It is commonly used in aircraft tubing for hydraulics and in athletic equipment.
• Titanium Grade 12 is a titanium grade alloyed with molybdenum and nickel. It is characterized by excellent corrosion resistance in reducing and oxidizing environments and offers better heat resistance than pure titanium grades. It is suitable for applications such as shell and tube heat exchangers and is typically used within, for example, the chemical industries.
• Titanium Grade 19/Titanium Beta C is a heat treatable, having very high strength alloy with good resistance to stress and corrosion in high temperature.
• Titanium Grade 23 / Titanium 6AL4V ELI has an improved ductility, toughness in the air, and saltwater environments. It is also used in a non-aged condition for maximum toughness. It's available forms are a seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, and flanges.
• Titanium Alloys are available in the form of Sheets / Plates, Rods / Bars, Flats, Circle, Forgings, Rings.

 

Titanium Wires :We have wide range of Titanium Wire available from Dia 1 to Dia 5mm in All possible Grade like Grade2, Grade 5, Grade 5ELI Etc

Titanium BarsWe have a wide range of Titanium Bars available from Dia 6 to Dia 200mm in All Grades.

Titanium SheetsWe have a wide range of Titanium Sheets available from Size: 0.5mm to 3mm Thick in All Grades.

Titanium PlatesWe have a wide range of Titanium Plates available from Size: 4mm to 25mm Thick in All Grades.

We are offering aluminium alloys. In form of sheet, plates, structural, round bars, pipes & tubes, flat bars, square bars. Alumac. Mic-6 in sheets, plates, extrusions & forgings. in almost all possible grades & temper. u.s.a. (a.a.) 1050(e.c.), 1050, 1060, 1070, 1080, 1100, 2011, 2014, 2017, 2024, 2030, 2618, 3003, 3004, 3005, 4043, 4047, 5005, 5051, 5052, 5086, 5083, 5056, 5454, 5754, 6061, 6063, 6351, 6082, 6066, 6005, 6101, 6201, 7020, 7039, 7075, 8011.

As a trusted Importer, Exporter and Supplier, we deal in comprehensive range of Aluminium Alloys. We also provide drill pipe with external & internal upset & also drill pipe with protector. We have a wide range of Extruded, Rolled, Forged, Drawn Products & Extrusions in all forms such as Sheets, Plates, Round Bars, Square Bars, Rings, Tubes, Circles, Angles, Sections etc. We also provide Aluminium Alloys as per clients special request. Other Products : ALUMAC, ALUMOLD, MIC-6, RDE-40 Product Details

• 1xxx Series Alloys
  • Grades : 1100, 1200, 1050, 1080 ACCORDING TO EN 573-3
  • Other Grades : 1420T, 1421*T1, 1424*T, 1430*T, 1441T, 1441 T1, 1451, 1460/1/4

• 2xxx Series Alloys
  • Grades : 2014, 2017A, 2024, 2124
  • Temper : T4, T451, T651, T3, T531, T851

• 5xxx Series Alloys
  • Grades : 5052, 5083, 5086, 5754, 5754
  • Temper : O, H111, H32, F, H112, H116, H321, H116

• 6xxx Series Alloys
  • Grades : 6061, 6082
  • Temper : T6, T651

• 7xxx Series Alloys
  • Grades : 7050, 7075
  • Temper : T7451, T6, T651, T7351, T7651

With our up-to-date transit facilities and speedy services, timely and safe deliveries are guaranteed. Rooted in Mumbai(India), the company is providing qualitative products and that too at the most reasonable prices.

We are offering nickel alloys. Supper alloys / heat resistant alloys, special steels, controlled expansion alloys & titanium alloys : incoloy, inconel, nimonic, alloy 904l, monel, titanium, nickel, invar, kovar, nitronic 50, nitronic 60, hastalloy, ingots, zinc, tungsten, copper tungsten etc in all sections.

We are situated in Mumbai(India) and have established a fine network with the help of which we ensure timely delivery. We have hired dedicated professionals for checking the quality of the products against various parameters.