Our Products
Our product range contains a wide range of Triplex Plunger Pump, Horizontal Multistage Centrifugal Pump, Horizontal Centrifugal Pumps, Booster Pump and Horizontal Multistage Pump
0.5 HP / 3 Stage Horizontal Multistage Centrifugal Pump
Specification:
* SS 304 Impeller & Diffuser
* SS 410 Shaft & Sleeves
* Cast Iron Parts ED Coated
* F Class Winding Insulation
* Motor Body: Aluminium -Powder Coated
* Single Phase Models Supplied with T.O.P (Thermal Overload Protector)
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Pumps Individually Packed in Carton Box Followed by Master Carton Box and then it is is finally Wooden Pallet Packing
Delivery Time : WITHIN 10 DAYS
Horizontal Multistage Pump- 2.0 HP / 6 Stage - 1 Phase- 230 Volts- 50 Hz - 60 Mtrs Total Head. At 40 Mtrs /- Discharge - 4000 LPH
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Pumps are Packed in Individual Carton Box.
Delivery Time : 15 Working Days
Horizontal Multistage Pump- 1.0 HP / 4 Stage - 1 Phase - 50 Hz. 4000 LPH @ 26 Mtrs. Total Head 40 Mtrs. F Class.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Packaging Details : Pumps are Packed in Individual Carton Box.
Delivery Time : 20 Working Days
Horizontal Multistage pump with Brass 5 Way Connector, Brass NRN, Danfos KP35 Pressure Switch and Pressure Gauge.
Additional Information:
Payment Terms : L/C, T/T, Western Union
Packaging Details : Carton Box
Delivery Time : Depends on ordered Quantity
Complete Hydropneumatic Pumping System(HPN) Comprises the follwing:
Vertical Multistage Pumps 2W+1S, Manifolds (SKID set) , VFD Control Panel + PLC + RS 485 Modbus protocol communication Port + NRV + Butterfly Valves+ Base Frame, Hpyn Tank + 1 Pr Gauge + Pressure Switch + Bypass Starter + Single Phase Preventer + 3 Phase Reversal Preventer + Dry Running Preventer by Float in UGT + Positive Water In System
Additional Information:
Payment Terms : T/T
Packaging Details : Wooden Box
Delivery Time : WITHIN 20 Days Subject to Stocks and Order Quantity
This pump has been developed with improvements that regard both drive and wet ends, which allow to increase the reliability and reduce the maintenance. The pump is of conventional design with crankshaft in high strength steel and supported by two Premium quality tapered rolling bearings produced by one of the world leader company of this sector. The connecting rods are in a special bronze alloy with excellent low-friction and mechanical performances, the pump head is nickel-plated for added protection against chemicals while the pump body is in anodized die-cast high-strength aluminium alloy and with a paint treatment that increase the corrosion resistance. The rear cover has been extended to contain a larger amount of oil and ensure a better lubrication, besides the discharge oil cap is magnetic so that attracts and collects all the metal particles coming from wear of the mechanical parts in motion. The pistons are in ceramic with a polishing treatment and with an expanded thickness that increase its strength and durability, while the pistons guide have a double scrolling diameter to extend the life of the oil seals. The water sealing system has been improved through a Long life double seal system in which the primary seal is able to withstand high pressures and the secondary prevents the leakage of water.
Additional Information:
Payment Terms : T/T
Packaging Details : Polythene Bubble Pack
Delivery Time : Within Week
An Adelino vertical multistage pump isa type of pump designed to handle high pressure and flow rates, commonly used in industrial and building service applications.These pumps are characterized by their vertical orientation and multiple impellers, which allow for increased pressure and head.They are known for their high efficiency, low noise, and long service life, especially the stainless steel models
Additional Information:
Payment Terms : T/T
Packaging Details : Wooden Box
Delivery Time : Within Week
An Adelino vertical multistage pump isa type of pump designed to handle high pressure and flow rates, commonly used in industrial and building service applications.These pumps are characterized by their vertical orientation and multiple impellers, which allow for increased pressure and head.They are known for their high efficiency, low noise, and long service life, especially the stainless steel models
Additional Information:
Payment Terms : T/T
Packaging Details : WOODEN BOX PACKING
Delivery Time : Within Week
Hydroflex Membranes for Hydro pneumatic Pressure Tanks;It is produced with a Professional understanding at every stage from the creation of raw material formulation to technical design of the rubber product production moulds.
Hydroflex has a wide range of membrane products produced in various rubber types (EPDM & BUTYL).
Production
All rubber press machines for which Hydroflex membranes are produced are manufactured according to the latest technology, the best efficiency and the highest safety standards. These machines have a very strong closing force and high injection capacity ( up to 900 tons and 12.5lt capacity ) with mould size up to 1600mm x 1100mm.
Lab
The laboratory is an important place where the quality of Hydroflex membranes is tested. Quality controls first start with the rubber raw material. Then, the physical properties and mechanical properties (elongation, compression, and hardness) are checked in the final products to determine the optimum production-moulding conditions. In addition, controls regarding heat resistance, contact with water and other liquids and cyclic elongation are carried out in the laboratory
Membranes for Pressure and Expansion Tanks
Hydroflex membranes are mostly used in cold and hot water tanks, sanitary water and reverse osmosis tanks. These membranes, which are the heart of the tank, are produced in the form of bags in single volume or double volume.
Additional Information:
Payment Terms : T/T
Packaging Details : CARTON BOX
Delivery Time : Within Week
Hydroflex Membranes for Hydro pneumatic Pressure Tanks;It is produced with a Professional understanding at every stage from the creation of raw material formulation to technical design of the rubber product production moulds.
Hydroflex has a wide range of membrane products produced in various rubber types (EPDM & BUTYL).
Production
All rubber press machines for which Hydroflex membranes are produced are manufactured according to the latest technology, the best efficiency and the highest safety standards. These machines have a very strong closing force and high injection capacity ( up to 900 tons and 12.5lt capacity ) with mould size up to 1600mm x 1100mm.
Lab
The laboratory is an important place where the quality of Hydroflex membranes is tested. Quality controls first start with the rubber raw material. Then, the physical properties and mechanical properties (elongation, compression, and hardness) are checked in the final products to determine the optimum production-moulding conditions. In addition, controls regarding heat resistance, contact with water and other liquids and cyclic elongation are carried out in the laboratory
Membranes for Pressure and Expansion Tanks
Hydroflex membranes are mostly used in cold and hot water tanks, sanitary water and reverse osmosis tanks. These membranes, which are the heart of the tank, are produced in the form of bags in single volume or double volume.
Additional Information:
Payment Terms : T/T
Packaging Details : Carton Box
Delivery Time : Within Week
R Balasundaram (Vinayaka Industrials (agri))
3a Sri Ramnagar,Sengalipalayam, Idigarai, Coimbatore, Tamil Nadu - 641022, India
Share us via
Write a Review
