Well designed fire suppression systems must be constructed on essential design principles, this is why our extinguishing systems are engineered with your room infrastructure considerations.

FM-200 is a clean, colourless, and environmentally friendly fire suppression agent that is electrically non-conductive and safe for humans. It extinguishes flames primarily through heat absorption, leaving no residue, thus minimizing downtime after a fire and making FM-200 suppression systems accepted and respected worldwide with over two hundred thousand installations in more than seventy countries.

Electrical Enclosures may include Transformer, Elec Switch Gear, Motor Control Centres, Power Vaults and Cable trays. Fire can easily happen due to wire fatige, improper installation, Overloaded Circuits and Equipment Failures. For this reason, VINWARES Offer the most reliable and cost effective method to protect from damage often caused by undetected fire or unmanned area.

A Fire extinguisher, or extinguisher, is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e., no escape route, smoke, explosion hazard, etc.), or otherwise require the expertise of a fire department. Typically, a fire extinguisher consist of a hand-held cylindrical pressure vessel containing an agent which can be discharged to extinguish a fire. Fire extinguishers, manufactured with non-cylindrical pressure vessels also exit, but are less common.

All fire extinguishers must be painted signal red. Except for water extinguishers, each extinguisher has a coloured band near the top, covering at least 10% of the extinguisher's body length, specifying its contents.

A fire alarm system comprises of a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present.

These alarms may be activated from smoke and heat detectors, and relays can be used to control a wide range of smoke control systems which is an outcome of a blend of building mechanical systems with fire protection or life safety systems. Fire Alarms can be integrated with Fans, AHU dampers, Access Control doors, Elevators, IBMS Systems and Gas Suppression Systems.

Non-Addressable fire alarm systems use simpler technology and are suited to smaller applications where they are more cost effective than an addressable system. A non-addressable system may use fire detection zones, which are usually represented by LEDs on the control panel. Each Zone identifies a specific area of the building in order to speed up the location of a fire.

Addressable fire alarm systems, and their corresponding control panels, are more advanced than their conventional counterparts and offer a higher degree of programming flexibility and single point detection.

Fire hydrant pump systems (also known as fire pumps, hydrant boosters, fire water pumps) are high pressure water pumps designed to increase the fire-hydrant-bottom fighting capacity of a building by boosting the pressure in the hydrant service when mains are not enough, or when tank fed. They can also be used in water transfer and irrigation applications.

Fire Booster Pumpsets are available in diesel and electric drive configurations, assembled on a common fabricated base with pipework manifolds, valves, controls and accessories to provide a fully automated system complying with STANDARDS. Systems are engineered and fabricated in strict adherence to the relevant fire codes. Support services are provided from initial engineering assistance through to ON-SITE commission and after sales service.

Also known as diesel fire pumps and diesel hydrant pumps. We offer complete assurance that all of our fire pumps are built and quality tested to meet safety standards, using industry-recognised pumps and engines.

Well designed fire suppression systems must be constructed on essential design principles, this is why our extinguishing systems are engineered with your room infrastructure considerations.

FM-200 is a clean, colourless, and environmentally friendly fire suppression agent that is electrically non-conductive and safe for humans. It extinguishes flames primarily through heat absorption, leaving no residue, thus minimizing downtime after a fire and making FM-200 suppression systems accepted and respected worldwide with over two hundred thousand installations in more than seventy countries.

Electrical Enclosures may include Transformer, Elec Switch Gear, Motor Control Centres, Power Vaults and Cable trays. Fire can easily happen due to wire fatige, improper installation, Overloaded Circuits and Equipment Failures. For this reason, VINWARES Offer the most reliable and cost effective method to protect from damage often caused by undetected fire or unmanned area.

A Fire extinguisher, or extinguisher, is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e., no escape route, smoke, explosion hazard, etc.), or otherwise require the expertise of a fire department. Typically, a fire extinguisher consist of a hand-held cylindrical pressure vessel containing an agent which can be discharged to extinguish a fire. Fire extinguishers, manufactured with non-cylindrical pressure vessels also exit, but are less common.

All fire extinguishers must be painted signal red. Except for water extinguishers, each extinguisher has a coloured band near the top, covering at least 10% of the extinguisher's body length, specifying its contents.

A fire alarm system comprises of a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present.

These alarms may be activated from smoke and heat detectors, and relays can be used to control a wide range of smoke control systems which is an outcome of a blend of building mechanical systems with fire protection or life safety systems. Fire Alarms can be integrated with Fans, AHU dampers, Access Control doors, Elevators, IBMS Systems and Gas Suppression Systems.

Non-Addressable fire alarm systems use simpler technology and are suited to smaller applications where they are more cost effective than an addressable system. A non-addressable system may use fire detection zones, which are usually represented by LEDs on the control panel. Each Zone identifies a specific area of the building in order to speed up the location of a fire.

Addressable fire alarm systems, and their corresponding control panels, are more advanced than their conventional counterparts and offer a higher degree of programming flexibility and single point detection.

Fire hydrant pump systems (also known as fire pumps, hydrant boosters, fire water pumps) are high pressure water pumps designed to increase the fire-hydrant-bottom fighting capacity of a building by boosting the pressure in the hydrant service when mains are not enough, or when tank fed. They can also be used in water transfer and irrigation applications.

Fire Booster Pumpsets are available in diesel and electric drive configurations, assembled on a common fabricated base with pipework manifolds, valves, controls and accessories to provide a fully automated system complying with STANDARDS. Systems are engineered and fabricated in strict adherence to the relevant fire codes. Support services are provided from initial engineering assistance through to ON-SITE commission and after sales service.

Also known as diesel fire pumps and diesel hydrant pumps. We offer complete assurance that all of our fire pumps are built and quality tested to meet safety standards, using industry-recognised pumps and engines.