My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Cement Grout 10 Products available
  2. Building & Real Estate Developers 10 Products available
  3. Tile Adhesives 9 Products available
  4. Solvent Based Adhesives 4 Products available
  5. Emulsion Paints 4 Products available
  6. Waterproofing Chemical 3 Products available
  7. Cement 3 Products available
  8. Industrial Chemicals 3 Products available
  9. Geomembranes 2 Products available
  10. Special Coating 2 Products available
  11. Hardener Paste 2 Products available
  12. Body Fillers 2 Products available
  13. Sealants 2 Products available
  14. Granite & Marble Cleaner 2 Products available
  15. Concrete Admixtures 1 Products available
  16. Red Oxide Metal Primer 1 Products available
  17. Natural And Synthetic Resin 1 Products available
  18. Synthetic Fibers 1 Products available
  19. Catalysts And Absorbents 1 Products available
  20. Mortar 1 Products available
  21. Crack Repair Mortar 1 Products available
  22. Construction Aggregates 1 Products available
  23. Adhesive Chemicals 1 Products available
  24. Floor Cleaner 1 Products available
  25. Surface Cleaner 1 Products available
  26. Water Treatment Chemicals 1 Products available
  27. Wall Putty 1 Products available

Sealants

Our offered Product range includes Milky White SR SCWR-100 Stone Sealer and Stain Repellent Wet Look Sealer.

Milky White Sr SCWR-100 Stone Sealer

  • Min. Order (MOQ) 1 Ton
  • Brand SR
  • Country of Origin India
  • Color Milky White
  • Model Number SCWR-100
  • Packaging Size 1L
  • Packaging Type Bottle
  • Form Liquid
  • Curing Time 24hours
  • Service Temperature Range 8 DegreeC to 35 DegreeC

Description:

SCWR-100 is a ready-to-use water repellent with advanced technology based on silane and siloxane emulsion. It is used for porous stones as well as concrete.

The Technology Of SCWR-100:

SCWR-100 is an impregnating water repellent based on silane and siloxane emulsion. It penetrates the surface and forms a meshwork-like structure under the surface. This meshwork-like structure imparts water repellency to the surface leaving the surface breathable. The breathable surface allows permeability to water vapors beneath the surface thus decreasing chances of humidity inside the surface.

Key Features Of SCWR-100:

  • Water repellency
  • Good penetration
  • Breathable
  • Resistant to alkalis
  • Good adhesive for paints
  • Environment friendly
  • Does not changes the color of the surface

Suitable For:

  • Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.
  • Main terrace
  • Aerated concrete
  • Gypsum and Gypsum-based fiberboards
  • Light fillers, such as perlite, vermiculites, and aerated concrete granules

Not Suitable For:

Painted or colored surfaces

Surface Preparation:

  • Clean and dry the surface before application.
  • The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence.

Application:

  • Read the entire label before using
  • Test patch a surface before application.
  • Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)
  • Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.
  • Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.
  • The surface on which the product is applied should stay dry for 24hrs after application.

Desired Results After Application Of SCWR-20 :

The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use.

Cleaning Of Equipment:

By using water with soap or detergent

Storage:

Best before the date mentioned on the batch.

In case of cream formation, brief stirring will restore the original form.

Care Of Product:

Don’t keep it in direct sunlight.

Tight pack the container after use to maintain the product quality.

View Complete Details

Stain Repellent Wet Look Sealer

  • Min. Order (MOQ) 1 Ton
  • Country of Origin India
  • Packaging Size 1L
  • Packaging Type Can
  • Application Industry Weatherproofing
  • Form Liquid
  • Strength High
  • Shelf Life 1 Year
  • Origin of Country India
  • Purity 99%

Product Description:

A Perfect Stone Beauty Enhancer and Sealer Wet Look Sealer is a ready-to-use 2 in 1 water and stain repellent which imparts enhanced appearance to the stone. It is primarily used for mineral substrates.

stains from concrete. Its cleaning properties are specifically designed to clean stains from natural stones.

Wet Look Sealer is based on advanced technology of silicon which provides water and stain repellency to substrate by its impregnating action while providing a wet and enhanced look to the surface by staying partly at the surface.

The meshwork-like structure imparts water repellency to the surface leaving the surface breathable. The breathable surface allows

permeability to water vapors beneath the surface thus decreasing chances of humidity inside the surface.

Special Features & Standard Followed:

  • Feels like natural touch to stone
  • Water repellency
  • Oil repellency
  • Stain repellency
  • Good penetration
  • Breathable
  • Resistant to dirt pickup, biological growth hence increases surface life
  • Environment friendly
  • Does not changes the color of the surface
  • Re-coatable

Suitable Substrates:

Mineral substrates like marble, limestone, slate, clay,

etc.

 

 

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us