Our Products
The YPM semi automatic cap sealing machine is precision built on sturdy Welded steel Frame completely enclose in stainless steel sheet and doors are Provided to facilitate the servicing of machine. Machine is motorized, Incorporating rotating Threading & sealing rollers, for threading & sealing of ROPP cap.
Operation :
Technical’s Detail:
Salient Features :
At YPM, We design and manufacture a wide range of agitators for liquids and Paste for all process in the pharmaceutical, chemical, food, cosmetics and similar industries. Agitators are provided with different types of agitation components for process such as mixing, blending, dissolution, dispersion, homogenization, reaction, fermentation, oxidation, digestion and emulsification of liquid, paste, ointment, solution, viscous material and solid-liquid.
Agitators are designed and adapted to any vessel shape and can be implemented with or without lower support. Different types of blades can be combined depending on the process requirements. The sealing system are designed and adapted depending on the requirement of the various process and start from simple retainers to double mechanical seals. Agitators are available with different type of mounting as per suitability of the process and users requirements.
Different types of blades can be combined depending on the process requirements and various conditions including the stirring objective, tank shape, rotating speed, viscosity, mixing blades of different configurations should be applied for different operating objectives. Different mixing blades follow various specifications to design and select the configurations of the blades. The ratio of the blade to the inner diameter of the tank, angular speed of the blade top, viscosity change during mixing process and the range of the flow volume are the factors to be considered. There are various types of blade mixer and can be categorized into axial flow and radial flow according to the flow pattern of the fluid in the tank. The main factors affecting mixing performance are as below and the commonly used configurations are listed for reference: Agitators available with different type of drives and speeds with direct motor and with gear drive as per process requirements. Agitators are suitable for mixing volumes 5 liters to 5, 000 liters.
Salient Features :
Available various different type of mixing blade :
Slow Speed Stirrer Machine GMP Model :
Available different mounting of stirrer assembly :
Optional Features :
Homogenizer / Emulsifier Machine GMP Model :
High Speed Dissolver Machine GMP Model :
Vibro separators are circular unitary gyratory screens used to separate mass composition of solids from solids, liquid from solid and for gradation of materials as per particle size, having a very wide range applications.
This is accomplished by vibrating the screens in three different planes along the vertical axis by means of a specially designed vibratory motor having off centered weights at the top and bottom end of the motor shaft.
The top weight causes vibration in the horizontal plane which causes the material to move across the screen towards the periphery. The lower weight acts to tilt the machine which causes vibration in the vertical tangential axis.
The angle of lead of the lower weight with relation to the upper weight provides variable control of the screening pattern. Thus the material moves across the screens and also in the vertical and tangential planes enabling maximum screening. YADAV PHARMA MACHINERY’ Vibro sifter are available with a wide range of possible screen sizes (mesh) Option for multiple deck separation is also possible.
The unit consist of Specially designed vibratory motor to run on 400 / 440V, suitable HP, 3 phase, 50 cycles electric supply , with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the centre of the base plate of screening unit. Screening unit consists of SS 304 screen sandwiched between SS 304 hopper and bowl with the help of special clamp with gasket. Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict the vibration from being transferred to the floor.
Salient Features :
Noiseless, Maintenance free & high speeds
Details
Available in various models providing screening diameter of 12”, 20”, 30” , 36”, 48”, 72” etc
Portable and compact
Electric power requirement less than other machine of the kind in the industries & lower energy consumption compared to reciprocating vibratory system
Standard machine are with TEFC motor explosion proof / flame proof motor material.
All contact parts and screen of SS 304/316 AISI stainless steel material.
SS 316 quality contact parts optional.
Easy dismantling and cleaning facility for contact parts.
Wide range of screen sizes 4-200 Mesh.
Double & Triple deck screens with outlet and hopper for bottom deck available on request.
Specifications
Model | 20” | 30” | 36” | 48” |
---|---|---|---|---|
Screens | S.S. 304 | SS 304 | SS 304 | SS 304 |
Screen Dia. | 508 mm. | 762 mm. | 914 mm. | 1200 mm. |
Capacity / Hour * | 20 to 140 Kgs. | 30 to 200 Kgs. | 50 to 300 kgs. | 200 to 400 Kgs. |
Charging height | 1110 mm. | 1250 mm. | 1300 mm. | 1340 mm. |
Discharging height | 690 mm. | 790 mm. | 820 mm | 850 mm. |
Electric Motor | 0.50 HP special vibratory motor | 1 H.P. special vibratory motor | 1 H.P. special vibratory motor |
1.5 HP Special vibratory motor |
Net weight (Approx.) | 150 Kgs. | 200 Kgs. | 250 Kgs. | 350 Kgs. |
Gross weight (Approx.) | 200 Kgs. | 260 Kgs. | 325 Kgs. | 420 Kgs. |
Machine Dimension (in mm) | 700 mm x 700 mm x 1000 mm | 900 mm x 900 mm x 1250 mm | 1100 mm x 1100 mm x 1300 mm | 1350mm x 1350 mm x 1350 mm |
Case Dimensions (in mm) | 900 mm x 900 mm x 1300 mm | 1000 mm x 1000 mm x 1400 mm | 1200 mm x 1200 mm x 1400 mm | 1450 mm x 1450 mm x 1500 mm |
Application
Special Feature
Standard Model :
Optional
Flameproof model
YPMCoating Pan designed by keeping in mind needs of universal conventional coating requirements such as rotational speed, angle of inclination of pan, inside finish of pan, total volume, temperature of air and exhaust arrangements.
Special Features :
Coating Pan Drive can be available with VFD for pan speed variation which required in both film as well as sugar coating.
Spraying systems is also available with the unit.
Polishing pan is made suitable on the same drive of coating pan drive.
Hot air / Cold air blowing system is used for tablets.
Model available in sizes 12", 24", 30", 42", 48", 60" and 72".
Hot air blower system with mobile trolley and filter housing will be provided with TIC or PID type temperature controller for control of air temperature within the range of 50 degree C to 80 degree C.
HEPA filter unit (optional) can be provided along with inlet ducting lines.
Other options such as FLP motor and panel, steam heating unit can be provided.
Pan : SS 304 / 316 semi ellipsoidal size pan with a circular mouth for charging & discharging of tablets Pan mounted at an inclination of 45 degrees to the horizontal.
Drive Assembly : Consists of a suitable HP 3 Phase, 440 V, 1440 RPM TEFC motor with suitable worm reduction gear box and cone pulley arrangement to give three speed output.
Hot Air Blower : The unit is provided with a hot air blower consisting of suitable HP 3 Phase 440 V, 2880 RPM TEFC electric motor & centrifugal blower with damper delivering required CFM. The air is heated by means of suitable electric heater to give air at 30 to 90 degrees Heater with thermostat control and flexible hose pipe.
Control Panel :
Mounting :
Finish :
Options Available :
Unit with FLP motors and FLP push button station but non FLP panel to be mounted outside FLP area,
Unit in SS 316 quality contact parts,
Unit with SS304 cladding / for GMP model and
Steam heating for blower.
Technical Specification
Model | YPM - CP-24” | YPM-CP-36” | YPM -CP-48” | YPM-CP-60” | YPM-CP-72" |
---|---|---|---|---|---|
Loading capacity | 25 | 60 -80 | 100-120 | 150-200 | 250-250 |
Drive Motor HP 3 PH 50 C S 415 V AC line | 0.5 | 1 | 2 | 5 | 7.5 |
RPM of Pan (empty) | 24 / 72 | 13485 | 41212 | 41145 | 41039 |
Hot air blower motor HP 3 PH 50 C/S 415 V AC line | 0.25 | 0.5 | 1 | 1 | 1 |
Blower capacity Maximum CFM | 100 | 200 | 500 | 750 | 750 |
Heater K.W | 1.5 K.W | 3 K.W | 4.5 K.W | 6 K.W | 6.K.W |
The YPM Semi Automatic Volumetric Liquid Filling Machine is precision Built on sturdy Welded frame completely enclose in stainless steel sheet and doors Are provided to facilitate the servicing of machine. Working on volumetric Principle. The unit is made compact, versatile and enclosed in stainless steel Elegantly matt finish body
Operation :
Containers have to place manually below the filling nozzle at platform of Machine. Where motor operated syringe fill desire pre set volume in container, Bottle guide are provide for precisely match for centering of container below Nozzle, to avoid spillage of liquid on container. The dosing block with a hexagonal Bolt fitted below syringe. This means fill size can be easily set.
Motor Required : 1 HP Three Phase motor /415 Volts / 50 Hz.
Filling Range : 100 ML -1000 ML
Net Weight : 120 Kg.
Gross Weight : 275 Kg.
Machine Dimension : 650mm (L) x 900 mm (W) x 950mm (H)
Salient Features :
Semi-Automatic with filling range. ± 1% Filling accuracy on single dose.
Three different speeds depending upon capacity of bottles.
Body covered with SS304 sheet. All contact parts SS 304 / 316
A unit to fill variety of liquid and can be used for various type of containers.
Minimum change over time from one size to another container or fill size.
Optional Features :
Change parts Extra
Storage Tank Extra
Utility Requirement : Electrical Supply:- Single Phase + Neutral + Earthing.
The YPM Packing Conveyor belt is having stainless steel table top with moving endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe and supported on adjustable bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection packing.
Operation: The conveyor belt brings the container or products from the labeling/blister/strip machine, operator in turn pickup these bottles/products and visually inspect the bottles/products and doing necessary action like primary packing, secondary packing, picking and placing at proper place.
Salient Features
Optional Features :
Optional Features :
We Also Manufacturer
Technical Specification
Model | YPM – PCB | |
Direction of Movement | Left To Right | |
Speed | 7.5 Mtr. / MIN up to 12 feet long. 12 Mtr. / MIN from 13 feet to 24 feet long |
|
Power Characteristics** | 0.25 HP/220 v/50 Hz up to 12 feet long. 0.5 HP/220 v/50 Hz from 13 feet to 24 feet long |
|
Height of Conveyor** | 860 mm to 910 mm. | |
Belt Width** | 9” or 12” as per requirement | |
Belt Detail** | PVC, endless 2 ply sandwich, 2 mm thickness | |
Machine Dimensions** | 9” width belt | As per requirement (l) x 830 mm (w) x 910 mm (h) |
12” width belt | As per requirement (l) x 900 mm (w) x 910 mm (h) | |
CaseDimensions** | 9” width belt | As per requirement (l) x 1050 mm (w) x 1150 mm (h) |
12” width belt | As per requirement (l) x 1100 mm (w) x 1150 mm (h) | |
Net weight | Depend on length | |
Gross weight | Depend on length |
** We can supply as per customer requirements.
IMPACT Pulverizer Machine :Since our inception, we are fully involved in manufacturing and supplying high quality YPM Impact Pulverizer. These equipments are precisely designed to install in pulverizing machine. In accordance with set industry norms, these equipments are manufactured by utilizing optimum quality raw materials. Moreover, this YPM Impact Pulverizer Machine is highly acclaimed due to their perfect finish and easy installation.
We manufacture, supply and export different models of impact pulverizer machine. All its wide range is made using superior quality raw materials. It is featured with very smart functions and is dimensionally very much accurate. This machine will offer you maximum output with minimum power consumption. It is very easy to clean, operate and it has multipurpose use as you can grind food items, spices, chemicals etc.
Features :
Cyclone Pulverizer Machine :he unit is to reduce the size of the hearbals; medicine powder etc.All contact part of the pulvrizer is made of the Mild Steel or Stainless Steel. The machine is driven by motor of three Phases, With Starter etc. The unit is provided with provision for affixing mesh of different size as per requirements and nature of materials to be provided The pulvrizer shall reduce the Powder size up to 100# mesh.
Features :
Technical’s Specification Of IMPACT Pulverizer Machine
Model | Size of Grinding Chamber | Motor required | Material Output |
---|---|---|---|
YPM-IP-3 HP | 10” x 4” | 3 H.P | 5 kg – 10 kg |
YPM-IP-5 HP | 10” x 6” | 5 H.P | 25 kg - 40 kg |
YPM-IP-10 HP | 12” x 9” | 7.5 / 10 H.P. | 60 kg - 80 kg |
YPM-IP-15 HP | 16” x 9” | 15 H.P. | Up to 150 kg |
YPM-IP-20 HP | 20” x 9” | 20 H.P. | Up to 250 kg |
Technical’s Specification Of Different Model Available
Model | Size of Grinding Chamber | Motor required | Material Output |
---|---|---|---|
YPM-HP-3 HP | 10” x 4” | 3 H.P | 10 kg – 25 kg |
YPM-HP-5 HP | 10” x 6” | 5 H.P | 40 kg - 60 kg |
YPM-HP-10 HP | 12” x 9” | 7.5 / 10 H.P. | Up to 100 kg |
YPM-HP-15 HP | 16” x 9” | 15 H.P. | Up to 200 kg |
YPM-HP-20 HP | 20” x 9” | 20 H.P. | Up to 300 kg |
Technical’s Specification Of Cyclone Pulverizer Machine
Model | Size of Grinding Chamber | Motor required | Material Output |
---|---|---|---|
YPM-HP-3 HP | 10” x 4” | 3 H.P | 10 kg – 25 kg |
YPM-HP-5 HP | 10” x 6” | 5 H.P | 40 kg - 60 kg |
YPM-HP-10 HP | 12” x 9” | 7.5 / 10 H.P. | Up to 100 kg |
YPM-HP-15 HP | 16” x 9” | 15 H.P. | Up to 200 kg |
YPM-HP-20 HP | 20” x 9” | 20 H.P. | Up to 300 kg |
Operation
Special Features of Octagonal Blender :
Octagonal Blender is Suitable for dry mixing of products in granule form.
Easy for loading and unloading of material.
Easy for cleaning.
All contact parts of the Octagonal Blender are made out of S.S. 304 / S.S. 316 quality material, as per customer requirement.
The octagonal shape & slow speed of rotating gives sufficient continuous movement to the granules result in good quality.
Simple design Octagonal Blender requires minimum maintenance.
General structure & safety guards made out of mild steel & colored in Standard Model and made out of SS 304 & polished to the matt finish in GMP Model.
Maximum care has been taken to ensure safe operation of the unit.
Manual rotating facility with hand wheel for inching.
Bigger size batch at low power consumption.
Option (Will be provided on extra cost on your demand)
Contact parts of the Octagonal Blender made out of SS316 instead of SS304.
Flame proof drive motor along with flame proof starter.
Vacuum Loading facility for material charging.
Cylindrical container with cone for material discharging.
It is used for Superfine grind, Homogenizing, Dispersing, Mixing and emulsifying in single process.
Application & Process :
Salient Features :
Optional Features :
Safety Features :
YPM Starch Paste Kettle GMP Model will be made out of S.S. 304 Rectangular Pipes and will be an independent resting type frame work where no foundation will be required. The Kettle will be a hemispherical type bowl with either steam / Oil / Water heating Jacket will be provided. The Kettle will be manufactured from 2.5 mm thick S.S. 304 Sheet and The Jacket will be of 2.5 mm Mild Steel (In case of steam Jacket the thickness will be 4 mm) There will be oil / water heated fitted at the back bottom side of the Kettle. The Kettle having a worm type arrangement for tilting.
A temperature controller & a temp Indicator will be provided for temp control & Indication. The Kettle will be Insulated with 50 MM thick glass wool Insulation & Cladded with 16 SWG S.S. 304 Sheet. Starch Paste Kettle will be buffed to 150 grit matt finishes externally and Internally the Kettle will be buffed to 220 grit mirror finish.
Functions : Basically YPM Starch Paste Kettle is used for preparation of Starch Paste. Hemispherical shape ensures that the Heating of the Starch Paste is Uniform & gets more Surface area. The tilting type arrangement Ensures ease in unloading the Paste into any container or vessel. The Starch Is put in the kettle and water is added till desired thickness is achieved. The Kettle is jacketed & is heated till the Starch Melts an Thick Paste is achieved. This Paste can be agitated either manually or with The Help of an Anchor Type agitator which will constantly stir. The Paste so that there will no lumps formation and proper mixing is achieved. Temperature can be set to desired temp by adjusting the thermostat provided.
Optional Available :
Starch Paste Kettle is built in stirrer arrangement with lifting & lowering device
Our Starch Paste Kettle is equipped with Steam fittings with all connections factory fitted
Non Tilting type with bottom discharge models is also available.
Capacities Available : Our Starch Paste Kettle is available From 50 Liters to 1500 Liters Capacity. We Also Manufacturer Capacity 3000 Liters & Above. Needless to say, it also provides the benefits of the effective manpower utilization.
The YPM Stainless steel scrambler & un scrambler, size 48", 36", 30" & 24" diameter, with variable pitch pulley drives OR direct geared motor driven with variable speed drive, to ensure uniform flow of containers to suit different machines and purpose on line.
The unit is built on M. S. Square pipe frame or optional S. S. Square pipe and totally encompassed with S. S. Coverings. The S. S. Cladded aluminum cast disc, soiled guide rails; helical gear housing provides a serials and noiseless performance for a long time. The variable pitch pulley ensures total and finer synchronization for incoming and out-going containers.
Salient Features :
Optional Features :
Utility Requirement :
Technical Specifications
Model | YPM –TT- 30 | YPM - TT – 36 | YPM – TT - 42 |
---|---|---|---|
Direction | Clockwise / Anti clock wise as per requirement | ||
RPM of Disk | 4/5/6 through step pulley | ||
Power Characteristics | 0.5 HP / 415 V / 50 Hz | ||
Height of Disk | 860 mm to 910 mm | ||
Machine Dimensions | 780 x 780 x 1160 | 925 x 925 x 1160 | 1076 x 1076 x 1160 |
Case Dimensions | 975 x 975 x 1300 | 1125 x 1125 x 1300 | 1300 x 1300 x 1300 |
Net Weight | 150 kgs. | 175 kgs. | 200 kgs. |
Gross Weight | 300 kgs. | 350 kgs. | 400 kgs. |
Note : Can be supplied as per customer's requirement.
Input Specifications
Container Size | Round Shape | Ø22 mm to Ø100 mm Respectively height 58 mm to 240 mm (Height option for other bottle height available) |