Our Products
Sand
2 Products availableIndustrial Water Filters
1 Products availableFilter Elements
1 Products availableFilter Cartridges
1 Products availableWe offer a complete product range of Gas Purification & Process Stream Treatment and Customized Equipment
It is used to collect highly dispersed droplets present in the carrier fluid and coalesce these droplets into large drops that can be separated from the bottom.
The water contaminated oil is passed through dense inorganic fiber bed or filter mat.
Coalescer is used for many industrial applications such as removing Oil from the compressed air.
Coalescers are available both in vertical and horizontal orientation based on the application.
Sand filter, which clarifies water by depth filtration mechanisms as it flows through a bed of graded sand that may be up to a meter in depth.
The filter bed consists of a uniform fine particle sand mixture as specified. The most critical design feature of the Sand Filter is using a correct sand or alternative media.
Sand Filter with Automatic Back wash arrangement is also provided to clean the bed at regular intervals.
It is also used as pre-filter for various other filtration systems.
Cartridges with material of construction such as:
It is used for separation of large organic molecules and the colloidal solids at a pressure in the range of 5-10 bars. The Ultrafiltration membrane is micro porous with separation range up to 0.1 microns which is roughly the size of virus.
Nanofiltration is used for removing monovalent ions and is mainly dependent on the material and manufacture of membrane.
Ultrafiltration and Nanofiltration cartridges are available which can be fitted inside the special housing.
Replaceable Filter Elements of Pleated, Basket and bag types are manufactured for Air, Gas, Hydraulic Oil, Lubricating Oil, Industrial water, Acid, Alkalies and other process fluids.
Elements in round, oval, square and various other shapes are manufactured.
Elements manufactured as per drawings, samples or designed as per requirement.
Temporary strainers for coarser particles such as disc and conical type required during commissioning stage. This is a wafer type strainer, which can be mounted directly between flanges.
Y-type and T-type strainers as per the requirement are made.