Application : The machine serves to introduce Cored Wire into molten metal in ladle during the non-furnance treatment of steel (deoxidation, modification, desulphurizations, adding of alloying elements). This equipment was designed for the needs of large metallurgical plants. Operation Parameters :

• Diameter of Cored / Solid wires : From 9 mm to 16 mm
• Velocity of Wire Injection : Up to 300 m/min (400 m/min)
• Velocity Control : Stepless
• Setting Range of Meters : 0001 m ÷ 9999 m, every 1 m
• Number of Feeding Strands : 4
• Number of Powered Rolls in One Strand : 4

Control : Control is performed with PLC. All parameters like wire length to be introduced into ladle and injection velocity are setting from keyboard of PC, independently for each strand. These parameters are displayed on PC monitor during the operation. After the START icon is clicked the appliance will introduce a required length of wire with predefined velocity into the ladle and will stop by itself when done. Then wire will be withdrawn automatically on the end of the feeding cycle.

Application : The machine serves to introduce Cored Wire into molten metal in ladle during the non-furnance treatment of steel (deoxidation, modification, desulphurizations, adding of alloying elements). This equipment was designed for the needs of large metallurgical plants. Operation Parameters :

• Diameter of Cored / Solid wires : From 9 mm to 16 mm
• Velocity of Wire Injection : Up to 300 m/min (400 m/min)
• Velocity Control : Stepless
• Setting Range of Meters : 0001 m ÷ 9999 m, every 1 m
• Number of Feeding Strands : 4
• Number of Powered Rolls in One Strand : 4

Control : Control is performed with PLC. All parameters like wire length to be introduced into ladle and injection velocity are setting from keyboard of PC, independently for each strand. These parameters are displayed on PC monitor during the operation. After the START icon is clicked the appliance will introduce a required length of wire with predefined velocity into the ladle and will stop by itself when done. Then wire will be withdrawn automatically on the end of the feeding cycle.