Other Products / Services #3466196

• Planetary Mixer efficiently combines liquid and solid particles to form paste without vacuum
• Planetary rotation of beaters provide uniform product mix
• Batter beater/drop center beater with scraper blade to suit product/process
• Materials may be either charged on open cover or by vacuum feed
• Large quantities of materials from phase vessel is sucked efficiently by vacuum
• Bottom vessel is movable with non marking castor wheels
• Top main stirrer speed-10-60 rpm, driven by suitable motor with suitable gear box
• Motor: Crompton/Kirloskar make-FLP and gearbox

• Homogeniser & Emulsifier is provided as an optional attachment based on customer preference.
• The homogeniser attached at the bottom with re-circulation arrangement colloids the product to a fine paste due to high shear speed and milling through perforated holes.
• Creating fine stable emulsion is very essential in the process of cream making
• It creates high shear force to break the particle size to microns
• Higher the shear energy created, lower the particle size resulting in soft cream
• The stator houses the rotor driven by suitable inline motor
• Rotor shaft fitted with the double cartridge. Mechanical seal of TC/TC seal face
• Mechanical seal is provided with cooling water arrangement
• Interlock to stop the motor if the cooling water is not circulated
• Complete product contact parts are made of SS 316 l and other parts of SS 304
• Inner parts are finished to class 4b (mirror) finish and all other 2b (satin) finish

• The trolley mounted stirrer is suitable for mixing product in containers
• Base frame of the trolley is made of powder structure with tiltable top assembly
• Three non marking rubber wheels are provided for easy movement of trolley
• Stirrer is driven by suitable Bonfiglioli motor with a speed of particular RPM variable
• VFD panel and starter is fitted to the side of the structure for easy adjustments
• Propeller type stirrer is provided. Option of schowls disc also may be provided
• Heavy duty bearing base frame takes up the load while stirring
• Easy removal and refitment while cleaning. Confirms to GMP norms
• Option of powered lifting system of stirrer will cost extra

• Sigma mixer is a heavy duty mixer designed for dough mixing which is essential in the soaps, detergents, foods, rubber, chemical industries etc.
• The Z arm or Sigma blade is designed for uniform mixing and criss cross flow of materials.
• The blades rotate in the ratio of 1:1.5 ( 24 : 36 ) rpm
• The mixer is supplied with jacket or without jacket as per the requirement of the customer.
• We supply in different capacities with fully SS, Partly SS and fully MS constructions.
• Discharge is by hydraulic door opening system or through screw rod system.
• Heavy duty gear box and gears are used to withstand high viscous mixing.
• Sigma blades are solidly casted, machined, x ray tested before fitting.
• Minimal uniform gap is maintained between the trough and the blades.

• Twin worm simplex plodder / Pelletizer takes up refines the material from mixer
• The mixture is extruded by twin screws through the fine orifices of noodle plate
• Twin cylindrical barrel made of high thick SS 304/ MS and precision machined inners
• Barrel is constructed with thick back flanges to match to the twin output gearbox
• The barrel is jacketed and pressure tested for chilled water circulation
• Twin screws left and right flutes are designed with reduction pitch
• Screws are solidly casted SS 304, X ray tested with flights for positive extrusion
• Spider plates support the screws with SS pin and Teflon bush supports
• The worm shaft is supported at the end through heavy duty thrust bearing housing
• Main motor : Crompton / Kirloskar make 1440 rpm 3 phase
• Helical Gear box-Radicon/Shanthi/Elecon fitted with sturdy double output gear box
• Rotary SS shredders fitted on worms cut equal lengths of noodles

• The Single Worm Simplex Plodder Is Used for Bar Extrusion Or Noodling
• Simplex Plodder Refines the Mixed Mass Through Noodle Plate of Specified Diameter
• Driven by Crompton/Kirloskar Motor Through Suitable Gear Box
• Elecon/ Radicon/Shanthi Make Gear Box Is Used for Speed Reduction
• Product Contact Parts Are Made of SS 304 / MS. Barrel Is Made of SS / MS Pipe
• Worms with Reduction Pitch Are SS 304 Casted and Tested
• Option of Cone with Heater Arrangement Or Noodle Plate is Provided
• Worm Is Supported at the Barrel Center Through Teflon Bush Pins
• The Barrel Is Jacketed for Chilled / Cooled Water Circulation
• Basic Frame Is Made of Sturdy MS Base and Covered Suitably
• The Worms Are Easily Removable and Refittable by the Triple Teeth Coupling
• End Thrust Bearing of Heavy Duty in Nature Provides Longer Running Life

ADHISAKTHI is manufacturing a wide range of equipment for personal care division and pharma machinery division. Manufacturer of these products, we have invested towards the development of new technologies that are in tune with the international standards and regulations. This has assisted us to up our strength in the Personal Care Machinery Division and become one of the far-famed Personal Care Machinery Exporter from India. In the Pharma Machinery Division, we manufacture machinery for the processes of cream mixing, liquid mixing, powder ribbon blending, and powder filling. In the Personal Care Machinery Division, we manufacture machinery for the processes of case packing cartoning & secondary packaging, pouch filling, tablet counting, material handling, process automation, and batch weighing. All the machinery for pharma division and personal care division are offered in different capacities and for different, multiple applications.

To sustain our reputation as the best Ribbon Blender Machines Manufacturer, we have invested substantially in acquiring latest manufacturing technology and machines. The Ribbon Blender Machinery is made with solid SS/MS U trough. This is fitted with an efficient double helical agitator which gives a perfect mix of various liquid and powder material, leaving no unmixed spots. Exhaustive mixing is ensured with the construction of various types of ribbon profiles in the main shaft. Few of the application areas of Ribbon Blender Machinery are foods, pharmaceutical, chemical, cosmetics and pesticides industry. We can custom design the ribbon profiles as per the requirements of customers. The equipment has reverse and forward helix with continuous ribbons, which provides gentle mixing.

• Blenders top will be covered with Polycarbonate windows or SS sheets
• End seals are mechanically sealed or glanded
• On the basis of product demands, we can made bottom discharge from ball valves, shutters or knife edge gate valves
• To grind or fill processes, the discharge can be directly connected with screw conveyors

• DCB is designed for effective homogeneous mixing of dry powder and granules
• The trough shape is central cylindrical with top and bottom conical sections
• Complete Double Cone trough would be made up of SS304
• Trough tumbling action ensures homogenous mass mixing
• Particle size reduction is minimized due to the absence of any moving blades
• The shape of blender results in a near complete discharge of product material
• 2HP motor gear box for medium powder blending application
• Btm discharge options with shutter/valve type placed suitably
• The basic frame would be made of powder coated MS leg support
• The top side is fitted with the view glass
• Discharge door with hinged supports at bottom is provided for discharge

• Adhisakthi is a pioneer in the manufacture of high speed round dish wash bar cutting machines.
• The Round Bar From the Plodder Will Be Cut by Special Purpose Heavy Duty Cylinder
• The Cut Bars Sent to the Horizontal Pusher Station
• Infeed Primary Horizontal Pusher Pass the Bar to Secondary Pusher
• Secondary Pusher Feeds to Bar to Vertical Slicing Station
• Vertical Slicing Is Done by A Special Heavy Duty Vertical Cylinder
• Cutting Is Done by the Standard Thickness Given by the Customer
• Change Parts Are Required for Changing the Bar Thickness
• The Off Cuts After Slicing Need to Be Manually Removed
• The Slices Are Taken by A Take Up Conveyor for Placement in Plastic Cups
• Slice Need to Be Placed in Cups Manually and Sent to Stamping Machine
• Pneumatic Jet Lock Locates the TUBS to Press and Emboss
• Pre labelled

• The Case Erecting and Taping Machine Automatically Erect Carton and Does Bottom Taping
• The Carton/CLD Bundles Need to Be Placed on A Width Adjustable Magazine
• Cartons Are Erected Automatically Through Suction Cups and Flaps Are Closed
• Specially Designed Intermittent Motion Chain Drive Picks Up the Carton for Taping
• The Machine Is Suitably Designed to Accommodate A Range of Carton Sizes
• The Machine Is Sturdily Constructed and It Is Fully Covered with Powder Coated MS
• Pneumatic Components Are of FESTO / SMC Make
• PLC : OMRON

• The automatic pouch bag filler helps to count and pack individual pouches from VFFS machine to bags .
• Versatility to handle varied pouch size and compatible to link up twin lane pouch machines .
• Optional integration with take up conveyors through traffic system and connecting to auto-stitchers .

adhisakthi is a superior name in the domain of manufacturing liquid manufacturing plants, wherein liquid soap plant machine is one of our best products. We are trusted as the liquid soap plants manufacturer from india, having commitment towards highest quality standards. We keep pace with the market innovation all over the global arena through our research wing. It enables us in ensuring latest technologies in every component of liquid soap plant machine such as:

• main mixing vessel
• phase vessel
• storage trolleys
• working platform

mixing capacities:

50 kgs /100 kgs /250 kgs / 500 kgs /1000 kgs /2000 kgs / 5000 kgs.

manufacturing vessel:

• 3 agitation assemblies are supported by top dish
• geared motor is the fuel for agitator
• it is balanced by 3 legs that are at an equal distance and 120 deg angles
• it is insulated with mineral wool with ss 304 cladding
• it is jacketed for circulation or cold water and steam
• product contact points are made of ss 316l, class 4 b (mirror finish)
• ss 316 l anchor stirrer consists of plates rotating at a speed of 50 rpm
• top dish is provided with the following 400 mm dia manhole / 100 mm dia light glass / 25 phase vessel inlet / 50 mm dia butterfly discharge valve / 10 mm dia temperature sensor

phase vessel:

• it is insulated with mineral wool with ss 304 cladding
• it is made of ss 304 and jacketed for circulation or cold water and steam
• product contact points: ss 316l, class 4 b (mirror finish)
• propeller type agitator rotates at 960 rpm

batch storage trolley

• it has 40 mm butterfly discharge valve and a flat top lid
• product contact points have ss 316 l as material of construction to class 4 b
• ss 304 finished covers, with class 2 b stain finish
• the vessel is mounted on 3 legs and castor wheels
• this cylindrical trolley has 3mm thick conical bottom vessel

optional accessories

• circulation pump
• steam lines
• transfer pipe lines
• working platform
• thick conical bottom vessel

adhisakthi is a superior name in the domain of manufacturing liquid, manufacturing plants, wherein liquid soap plant machine is one of our best products. We are trusted as the Liquid Soap Plants Manufacturer from India, having commitment towards highest quality standards. We keep pace with the market innovation all over the global arena through our research wing. It enables us in ensuring latest technologies in every component of liquid soap plant machine such as:

• Main Mixing Vessel
• Phase Vessel
• Storage Trolleys
• Working Platform

MIXING CAPACITIES:

50 Kgs /100 Kgs /250 Kgs / 500 Kgs /1000 Kgs /2000 Kgs / 5000 Kgs.

MANUFACTURING VESSEL:

• 3 agitation assemblies are supported by top dish
• Geared motor is the fuel for agitator
• It is balanced by 3 legs that are at an equal distance and 120 deg angles
• It is insulated with mineral wool with SS 304 cladding
• It is jacketed for circulation or cold water and steam
• Product contact points are made of SS 316L, Class 4 B (mirror finish)
• SS 316 L anchor stirrer consists of plates rotating at a speed of 50 rpm
• Top dish is provided with the following 400 mm dia manhole / 100 mm dia light glass / 25 phase vessel inlet / 50 mm dia Butterfly discharge valve / 10 mm dia temperature sensor

PHASE VESSEL:

• It is insulated with mineral wool with SS 304 cladding
• It is made of SS 304 and jacketed for circulation or cold water and steam
• Product contact points: SS 316L, Class 4 B (mirror finish)
• Propeller type agitator rotates at 960 Rpm

BATCH STORAGE TROLLEY

• It has 40 mm butterfly discharge valve and a flat top lid
• Product contact points have SS 316 L as material of construction to class 4 B
• SS 304 finished covers, with class 2 B stain finish
• The vessel is mounted on 3 legs and castor wheels
• This cylindrical trolley has 3mm thick conical bottom vessel

OPTIONAL ACCESSORIES

• Circulation pump
• Steam lines
• Transfer pipe lines
• Working platform

Adhisakthi is a superior name in the domain of manufacturing liquid manufacturing plants, wherein liquid soap plant machine is one of our best products. We are trusted as the Liquid Soap Plants Manufacturer from India, having commitment towards highest quality standards. We keep pace with the market innovation all over the global arena through our research wing. It enables us in ensuring latest technologies in every component of liquid soap plant machine such as:

• Main Mixing Vessel
• Phase Vessel
• Storage Trolleys
• Working Platform

50 Kgs /100 Kgs /250 Kgs / 500 Kgs /1000 Kgs /2000 Kgs / 5000 Kgs.

• 3 agitation assemblies are supported by top dish
• Geared motor is the fuel for agitator
• It is balanced by 3 legs that are at an equal distance and 120 deg angles
• It is insulated with mineral wool with SS 304 cladding
• It is jacketed for circulation or cold water and steam
• Product contact points are made of SS 316L, Class 4 B (mirror finish)
• SS 316 L anchor stirrer consists of plates rotating at a speed of 50 rpm
• Top dish is provided with the following 400 mm dia manhole / 100 mm dia light glass / 25 phase vessel inlet 50 mm dia Butterfly discharge valve 10 mm dia temperature sensor

• It is insulated with mineral wool with SS 304 cladding
• It is made of SS 304 and jacketed for circulation or cold water and steam
• Product contact points: SS 316L, Class 4 B (mirror finish)
• Propeller type agitator rotates at 960 Rpm

• It has 40 mm butterfly discharge valve and a flat top lid
• Product contact points have SS 316 L as material of construction to class 4 B
• SS 304 finished covers, with class 2 B stain finish
• The vessel is mounted on 3 legs and castor wheels
• This cylindrical trolley has 3mm thick conical bottom vessel

• Circulation pump
• Steam lines
• Transfer pipe lines
• Working platform

ADHISAKTHI is well experienced to design and deliver toilet soap manufacturing facility in a state of the art standard.
Following machineries are supplied to perform individually or as a complete plant.

• Sigma mixer
• Noodler / Refiner
• Triple roll mills
• Duplex vacuum plodder
• Bar Cutting machine
• Toilet Soap Stamping machine
• Soap packing machine
• Cartoning machine
• Auto case packer

• OPTIONS : FULLY AUTOMATIC TOILET SOAP PLAT

  • Automatic raw material elevation
  • Process Automations and batch weighing systems
  • Direct feed of soap to stamping and packaging lines with auto recycling.
  • End of line automations

  MECHANIZED TOILET SOAP PLANT

  • Bucket elevator noodle feeding
  • Direct feed of soap to stamping and packaging line with auto recycling

  BASIC PLANT

  • Only Basic Machinery will be supplied
  • Hand stamping or foot stamping machine.

  TOILET SOAP PLANT FINISHING LINE:

  • Soap making from Soap Noodles comprising of the following stages
  • Noodles along with additives will be mixed in the sigma mixer between 20 minutes to 30 minutes based on customer preference.
  • Mixed mass from the sigma mixer is fed to the plodder for refining.
  • The refined soap is fed to the triple roll mill 2 pass or 4 pass depending upon customer requirements and taken out as flakes.
  • The flakes are fed to the duplex vacuum plodder and taken out as bars of required size
  • Bar from the plodder is cut to desired size and stamped according to the shape required
  • Stamped cake is wrapped or carton packed depending upon packaging design preferred Finally fed to the master carton

  SALIENT FEATURES OF MECHANIZED PARTIAL AUTOMATIC TOILET SOAP PLANT:

  • Sigma mixer is placed on the platform to enable material flow by gravity
  • Soap Noodle is either lifted by bucket elevator or through electric hoist or manually as preferred
  • Entire mixed mass from sigma mixer is fed to Noodler / Refiner
  • Refined soap mass is fed to the Triple roll mill where it is flaked out
  • Flaked material is lifted by conveyor to the Duplex Vacuum Plodder
  • Bar cutter cuts the bar to set repeat lengths
  • Soap cutter is used to cut the soap to billets matching to the final size
  • Billets are fed to automatic stamping machine or manual stamping machine
  • Stamped cakes are either carton packed or soap wrapped

In view of technical and commercial requirements of customers, we offer a range of detergent soap plants. Adhisakthi is a reliable manufacturer, exporter and supplier of detergent soap plants that are used in various industries. We can offer automated or non-automated plants as per the requirements of customers. The product contact parts and other material are made in top grade stainless steel, or mild steel, as per clients needs. The detergent soap plants can be customized as per the specifications of clients and delivered with the assurance of quality.

• Basic plants without automation
• Fully automatic detergent bar plant
• Mechanized detergent bar plant

• Auto Case Packers
• Automatic Cutting and Stamping Machines
• Belt Conveyors
• Direct Online Link Up Systems
• Multi Screw Conveyor
• Plodders
• Pneumatic Elevating Systems
• Process Automation and Batch Weighing Systems
• Screw Feeders
• Sigma Mixer
• Soap Packing Machine
• Z Type Elevators

• Homogeniser & Emulsifier is provided as an optional attachment based on customer preference.
• The homogeniser attached at the bottom with re-circulation arrangement colloids the product to a fine paste due to high shear speed and milling through perforated holes.
• Creating fine stable emulsion is very essential in the process of cream making
• It creates high shear force to break the particle size to microns
• Higher the shear energy created, lower the particle size resulting in soft cream
• The stator houses the rotor driven by suitable inline motor
• Rotor shaft fitted with the double cartridge. Mechanical seal of TC/TC seal face
• Mechanical seal is provided with cooling water arrangement
• Interlock to stop the motor if the cooling water is not circulated
• Complete product contact parts are made of SS 316 l and other parts of SS 304
• Inner parts are finished to class 4b (mirror) finish and all other 2b (satin) finish

• The Case Erecting and Taping Machine Automatically Erect Carton and Does Bottom Taping
• The Carton/CLD Bundles Need to Be Placed on A Width Adjustable Magazine
• Cartons Are Erected Automatically Through Suction Cups and Flaps Are Closed
• Specially Designed Intermittent Motion Chain Drive Picks Up the Carton for Taping
• The Machine Is Suitably Designed to Accommodate A Range of Carton Sizes
• The Machine Is Sturdily Constructed and It Is Fully Covered with Powder Coated MS
• Pneumatic Components Are of FESTO / SMC Make
• PLC : OMRON

Adhisakthi is a superior name in the domain of manufacturing liquid, manufacturing plants, wherein liquid soap plant machine is one of our best products. We are trusted as the Liquid Soap Plants Manufacturer from India, having commitment towards highest quality standards. We keep pace with the market innovation all over the global arena through our research wing. It enables us in ensuring latest technologies in every component of liquid soap plant machine such as:

• Main Mixing Vessel
• Phase Vessel
• Storage Trolleys
• Working Platform

MIXING CAPACITIES:

50 Kgs /100 Kgs /250 Kgs / 500 Kgs /1000 Kgs /2000 Kgs / 5000 Kgs.

MANUFACTURING VESSEL:

• 3 agitation assemblies are supported by top dish
• Geared motor is the fuel for agitator
• It is balanced by 3 legs that are at an equal distance and 120 deg angles
• It is insulated with mineral wool with SS 304 cladding
• It is jacketed for circulation or cold water and steam
• Product contact points are made of SS 316L, Class 4 B (mirror finish)
• SS 316 L anchor stirrer consists of plates rotating at a speed of 50 rpm
• Top dish is provided with the following 400 mm dia manhole / 100 mm dia light glass / 25 phase vessel inlet / 50 mm dia Butterfly discharge valve / 10 mm dia temperature sensor

PHASE VESSEL:

• It is insulated with mineral wool with SS 304 cladding
• It is made of SS 304 and jacketed for circulation or cold water and steam
• Product contact points: SS 316L, Class 4 B (mirror finish)
• Propeller type agitator rotates at 960 Rpm

BATCH STORAGE TROLLEY

• It has 40 mm butterfly discharge valve and a flat top lid
• Product contact points have SS 316 L as material of construction to class 4 B
• SS 304 finished covers, with class 2 B stain finish
• The vessel is mounted on 3 legs and castor wheels
• This cylindrical trolley has 3mm thick conical bottom vessel

OPTIONAL ACCESSORIES

• Circulation pump
• Steam lines
• Transfer pipe lines
• Working platform

Adhisakthi is a superior name in the domain of manufacturing liquid manufacturing plants, wherein liquid soap plant machine is one of our best products. We are trusted as the Liquid Soap Plants Manufacturer from India, having commitment towards highest quality standards. We keep pace with the market innovation all over the global arena through our research wing. It enables us in ensuring latest technologies in every component of liquid soap plant machine such as:

• Main Mixing Vessel
• Phase Vessel
• Storage Trolleys
• Working Platform

50 Kgs /100 Kgs /250 Kgs / 500 Kgs /1000 Kgs /2000 Kgs / 5000 Kgs.

• 3 agitation assemblies are supported by top dish
• Geared motor is the fuel for agitator
• It is balanced by 3 legs that are at an equal distance and 120 deg angles
• It is insulated with mineral wool with SS 304 cladding
• It is jacketed for circulation or cold water and steam
• Product contact points are made of SS 316L, Class 4 B (mirror finish)
• SS 316 L anchor stirrer consists of plates rotating at a speed of 50 rpm
• Top dish is provided with the following 400 mm dia manhole / 100 mm dia light glass / 25 phase vessel inlet 50 mm dia Butterfly discharge valve 10 mm dia temperature sensor

• It is insulated with mineral wool with SS 304 cladding
• It is made of SS 304 and jacketed for circulation or cold water and steam
• Product contact points: SS 316L, Class 4 B (mirror finish)
• Propeller type agitator rotates at 960 Rpm

• It has 40 mm butterfly discharge valve and a flat top lid
• Product contact points have SS 316 L as material of construction to class 4 B
• SS 304 finished covers, with class 2 B stain finish
• The vessel is mounted on 3 legs and castor wheels
• This cylindrical trolley has 3mm thick conical bottom vessel

• Circulation pump
• Steam lines
• Transfer pipe lines
• Working platform

• SS Liquid Mixing Vessel is a Main Reactor to Mix Liquid Soap
• Vessel Shell Is Made of SS 304 Material. Both Top & Bottom Dish Ends
• Agitator Will Be of Paddle Type Stirrer Mounted on A Thrust Bearing Housing
• Geared Motor : Bonfiglioli Make & Speed of Stirrer : 50 Rpm
• Main Mixing Vessel Is Supported by 3 Nos of Legs and Bottom Discharge
• Variable Frequency Drive Cost Will be Extra.
• Vessel Working Pressure : Atmospheric

tube filling and sealing machine

tube filling and sealing machine is used to fill products in tubes and sealing it.

products that can be filled:

• products of different viscosities and flow characteristics ranging from tooth paste, cream, ointments, gel, shampoo, food products like sauce, adhesives, grease, etc.

tube types:

• laminated tubes, plastic co extruded tubes, aluminum tubes, metal collapsible tubes etc.,
• the filling and sealing methodology varies depending upon the type of product and the tube nature.

aspro tube filling machine salient features of the basic machine:

• machine is built robust and simple in design with user friendliness adapting to various working environments.
• the machine is driven through ferguson indexing mechanism to ensure accuracy of indexing and repeatability.
• filling nozzle is of positive shut off and blow off system to ensure nil tailing after filling.
• the pump house is made of ss 316l with a rigid base.
• hopper is made of ss 316 l with polished inner surfaces
• leister make hot air guns are used for sealing stations
• machine is compatible for filling and sealing both lami and aluminum tubes. However an attachment is needed for aluminum crimping.
• filling accuracy 0.5%
• the machine confirms to gmp norms.
• double side coding system with easy change over for coding digits. Mrp / pkd / batch no. On the crimps may be marked with this.

optional accessories salient features:

• auto tube loading device attachment to load the tubes automatically.
• automatic print registration device to sense the eye mark.
• double color filling system
• acrylic top covering with safety limit switch interlock doors
• plc based operating system
• a.c. Variable speed drive provision
• stirrer for the hopper

aspro macro

• elliptical runway mechanism
• higher output per nozzle compared with micro model
• easy access for lubrication & maintenance.
• suitable for combination sealing beam assembly.

aspro maxi

• suitable for high speed applications
• double head filling system
• elliptical linear runway assembly

aspro micro

• rotary turn table mechanism
• suitable for medium speed requirements
• occupies very less space comparatively.

semi automatic tube filling machine

• table top concept filling and sealing.
• suitable for r & d applications.
• useful for sample production quantities.
• manual tube insertion system

Adhisakthi is a top name in the segment of vertical form fill machines and vertical form sealing machines. These filling and sealing machines have high accuracy

• The automatic soap cutting and stamping machine is used to cut soap bar from the plodder, Cut the soap to billets and stamp the necessary logo
• The primary cutter cut the bars from the plodder at equal repeat lengths.
• The cutting system works based on the position of the sensor.
• User-friendly system to vary lengths of bars. .
• Bars are conveyed to cutting and stamping machine through a conveyor. .
• The bars are sensed automatically and pushed forward for secondary bar cutting and stamping.

Adhisakthi design and deliver a wide range of custom designed bundling and shrink wrapping machines suiting to various needs of customers.

The machine finds it applications in end of line automation and to shrink wrap individual products like container, cartons, shrink labels etc.

Machine is used to shrink various types of PVC shrinkable sleeves, poly olefin films, LD films etc.

• The machine contains customized product infeed and collating system.
• Bottom and top film dispensers with auto unwinding mechanism.
• Sealing with improved PTFE sealers
• Fully controlled through PLC
• Pneumatic components of FESTO/SMC Make.
• Optional SS 304 Construction.

• Heating chamber is an insulated construction fitted with suitable heaters.
• Size of the tunnel would depend upon the requirements.

1. Chain Based

2. PTFE Mesh Belt Based.

3. PUC Based

• Temperature setting up to 300 deg. Controlled with PID Temperature controllers.
• Conveyor speed is variable with the help of AC variable frequency drive.
• Uninterrupted running with simple system for heater replacement.
• Main Conveyor drive with Bonfiglioli geared motors.

Options of Single duct, double duct and triple duct available matching to pre shrinking and final shrinking needs.