Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

LM

Ligman Me Fze

Write a Review
Call Now Call Now

Our Products

  1. Street Lights 26 Products available
  2. Bollards 21 Products available
  3. Downlights 16 Products available
  4. Street, Flood & Commercial Lights 11 Products available
  5. Wall Light 10 Products available
  6. Foot Light 5 Products available
  7. Projector 4 Products available
  8. Tables 4 Products available
  9. Lanterns 3 Products available
  10. Fancy Jewellery 2 Products available
  11. Washers 2 Products available
  12. Living Room And Plastic Furniture 2 Products available
  13. Desk Accessories 1 Products available
  14. Bamboo 1 Products available
  15. Decorative Lights, Lamps & Lamp Shades 1 Products available
  16. Ceiling Light 1 Products available
  17. Lighting Service 1 Products available
  18. Side Tables 1 Products available
  19. Metal Tables 1 Products available
  20. Electrical Contractors 1 Products available
  21. Office And Commercial Furniture 1 Products available
  22. Granite 1 Products available
  23. Tube Lights, Lighting Fittings & Accessories 1 Products available
  24. Decoration Services 1 Products available
  25. Coasters & Napkin Holders 1 Products available
  26. Others Products 95 Products available

Our Products

Our product range contains a wide range of Jet Wall Luminaires, Jet Pendant Luminaires, Rado Recessed Location Luminaires, Jet Surface Downlight Luminaires and Area Lighting Luminaires

Harrier Inground

Harrier Inground
A top range of inground uplights with a choice of round or square stainless steel or aluminum front rings, used to illuminate shopping malls and pedestrian areas, parks, gardens and sculptures. Main characteristics are low glare. This product has a standard touchable glass ideally suited for spaces used by the general public. The luminaire rated as CLASS I or CLASS III with integral and remote driver depened on product. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminum housing with high corrosion resistance. The 6mm thick front ring is available in grade 316 stainless steel or aluminum. Stainless steel fasteners in grade 316. Power is provided through a single watertight cable. Durable silicone rubber gasket and clear toughened 10mm. thick glass, walk over 200 kgs. maximum. Body is treated with a chemical chromatized protection before powder coating. To ensure efficient drainage, gravel must be used to a depth of 450mm. beneath the housing, and should also be placed around the luminaire. Optional: Remote box in aluminium for remote driver. Recessing box in high density polyethylene. Optional ADA anti slip surface.
View Complete Details
Ask Latest Price & Details
Inground Luminaires

Inground Luminaires
The large size shallow LED inground uplights. Round and square surface stainless steel 316 front ring for use in residential, shopping mall and pedestrian areas for illuminating squares, parks, gardens, sculptures, flag poles and trees. This product is available with a variety of light control attachments and asymmetrical distributions. The luminaire rated as CLASS I with integral driver, available in asymmetrical light distribution for Type II, III , and IV. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Power is provided through a single PG13.5 watertight cable gland. High efficiency optics and PMMA lens. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened glass 15mm. thick glass, 2000Kg. load is transferred by the housing to the foundation. To ensure efficient drainage, gravel must be used to a depth of 450mm. and a width of 300mm. beneath the housing, and should also be placed around the luminaire. Vehicles with pneumatic tires can drive over the luminaire but the speed must not exceed 50Kmh. The distance between the floodlight and the illuminated surface should be at least 0.5m. Recessing box in high density polyethylene. Optional ADA anti slip surface.
View Complete Details
Ask Latest Price & Details
Uplight Luminaires

Uplight Luminaires
Lightalk inground fixtures are suitable for RGBW colour changing and static white color and are suited for wall grazing, column lighting and uplight installations. The Luminaires are suitable for many applications including commercial, historic or modern architectural interiors and exteriors. The different length options allow the luminaire installation to be tailored exactly to meet the architectural structure. The luminaire rated as CLASS I with integral driver. Lightalk 1 is white light 3000K and 4000K, LED CRI >80 and Lightalk 2 is designed for solid-state-lighting RGBW colour changing. The LED life time >50, 000 Hours. Asymmetrical distribution is available for Lightalk IWL. A small profile low copper content die-cast aluminum and extruded aluminum body with high corrosion resistance. Power is provided through a single watertight cable gland. Two cable glands are available upon request. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened 8mm. thickness glass with a walk over rating of 500Kg. maximum load. The luminaire is available in 2 lengths with a standard stainless steel grade 316 frame. Main housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. A60951 and A61051 are recessing box accessory must be ordered separately.
View Complete Details
Ask Latest Price & Details
Mask Inground

Mask Inground
Inground luminaires for illuminating the ground and horizontal surfaces with light distribution options from one, two or four sectors. Designed for use in shopping, pedestrian & park areas. Main characteristics are low glare. These products are suitable for general public areas that encounter high pressure loads from automobiles. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Fasteners in grade 316 stainless steel. Durable silicone rubber gasket and clear glass lens. Body and frame constructed in low copper content die-cast aluminum with high corrosion resistance. Power is provided through a single PG13.5 watertight cable gland. Two PG13.5 cable glands are available upon request. Recessing box in high density polyethylene. To ensure efficient drainage, gravel must be used to a depth of 450mm. and width of 300mm. beneath the housing, and should also be placed around luminaire. Pressure load 1000Kg. is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire but the speed must not exceed 10 kmh.
View Complete Details
Ask Latest Price & Details
Nevada Inground

Nevada Inground
The small LED Inground luminaires with a round stainless steel front ring, used to illuminate optionally as location luminaires or floodlights. Suitable for shopping or commercial building and pedestrian areas, parks, gardens and sculptures with low glare. Nevada is CLASS III, colour temperature 3000 and 4000K. LED service life is 50, 000 hours and replaceable module. Low copper content aluminum housing with high corrosion resistance. The 3mm. thick front ring is available in grade 316 stainless steel. Supplied with 0.5m. 2x0.5 sqmm. of outdoor power cable. Durable silicone rubber gasket. Stainless steel fasteners in grade 316. Clear toughened 8mm. thickness glass. Walk over 200 kgs. maximum. Body is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Recessing box in HDPE is included. To ensure efficient drainage, gravel must be used to a depth of 450mm. and width of 300mm. beneath the housing, and should also be placed around the luminaire. Remote driver is not included. This luminaire is constant current type and need connecting in series system.
View Complete Details
Ask Latest Price & Details
Lightwave LED Wall Washer Luminaire

Lightwave LED Wall Washer Luminaire
A decorative LED wall washer luminaire with a circular light emission on the surrounding surface to enhance wall material detail while giving the luminaire distinctive character. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum frame and body with high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear impact UV stabilized polycarbonate lens. The housing is powder coating with high corrosion resistance and chemical chromatized protection.
View Complete Details
Ask Latest Price & Details
Marvik Wall Luminaire

Marvik Wall Luminaire
A new accentuating wall luminaire with hidden fasteners & smart mechanical design and modern design. The luminaire with cylindrical body comes with high-efficiency LED modules and a variety of distribution optics. These luminaires are suitable for various faade lighting requirements along with accent lighting, building columns, architectural highlighting, etc. The luminaire rated as CLASS I with integral driver, available in narrow, medium, wide and very wide beams. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminum housing and frame. Stainless steel fasteners in grade 316. High efficiency optical reflector. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Option: Die-cast aluminum step baffle frame is available.
View Complete Details
Ask Latest Price & Details
Matrix Square Luminaires

Matrix Square Luminaires
Compact cubic wall mounted luminaires with up and downward light distributions. The Matrix is designed with three options of light distributions. Designed to illuminate the wall and surface in front of wall and for light accents on vertical or horizontal surfaces. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Paletta Surface LED Luminaire

Paletta Surface LED Luminaire
A range of square wall mounted bulkheads with opal impact resistant polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant UV stabilized polycarbonate diffuser. The LED luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Quarter Wall Luminaires

Quarter Wall Luminaires
A small quarter-cylindrical wall mounted luminaire. Light output is finely controlled to minimize light pollution with three types of light distribution. Asymmetrical type II, III, IV lens optics suitable for most kind of applications and dark sky concerns. Flat toughened glass cover for minimum spill light. Designed for the illumination of entrances, terraces, corridors and building facades. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Sandy Surface LED Luminaire

Sandy Surface LED Luminaire
A range of small and large circular wall mounted bulkheads with polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle chamfered frame and it can be given a more striking appearance by way of adding different grill and visor options. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum housing and frame. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant UV stabilized polycarbonate diffuser. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Tango Wall Luminaires

Tango Wall Luminaires
Wall luminaires with a selection of beam distributions for various downward or upward lighting requirements. Designed to illuminate the wall surface and areas. They are suitable for many applications such as residential and pedestrian areas, shopping malls, parks and gardens, as well as commercial, historical or modern architectural interiors and exteriors. The luminaire rated as CLASS I with integral driver, available in Asymmetrical light distribution for Type II, III , and IV. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminum housing and frame. Stainless steel fasteners in grade 316. High efficiency PMMA lens. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Triangle Wall Luminaires

Triangle Wall Luminaires
As small size wall mount area light with high ingress protection allows these luminaires to be mounted for downward lighting applications. The Triangle can be aimed to suit specific light patterns with the adjustable arm. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications and dark sky concerns. Designed for lighting private roadways, car parks, exhibition areas, service stations, truck stops and sports grounds. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant aluminum body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened glass. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Vekter LED Wall Luminaire

Vekter LED Wall Luminaire
A medium and large LED wall luminaire range with optional type II, III, IV and symmetrical M, W and EW light distributions for different installations in Height and spacing. Luminaires can be used for direct downlight or indirect uplight. Vekter is suitable for lighting footpaths, car parks, building facades, entrances, under canopies and signs or possibility for indirect uplight applications. Vekter 9, 10 come with adjustable mounting box while Vekter 7, 8 come with arm mounting both for floodlighting application. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum frame and body with high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The housing is powder coating with high corrosion resistance and chemical chromatized protection.
View Complete Details
Ask Latest Price & Details
Jet Surface Downlight Luminaires

Jet Surface Downlight Luminaires
A range of cylindrical and square shape surface mounted exterior downlight luminaires. The luminaires are suitable for indoor and outdoor applications for use in residential, shopping mall and public areas as surface ceiling downlights. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Stainless steel fasteners in grade 316. Power is provided to the luminaire through water tight single cable gland. Durable silicone rubber gasket and clear toughened glass.
View Complete Details
Ask Latest Price & Details
Light Luminaires

Light Luminaires
The innovative optical technology designed for the pillar light guarantees a high degree of efficiency and optimal visual comfort while fulfilling dark sky requirements. Veranda has been developed to provide excellent controlled downward light distribution which eliminates any glare. It has three light shields with different light distributions. Designed for lighting of entrances, gardens, pathways & squares. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum body and low copper content housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear impact resistant UV stabilized polycarbonate lens. Double cable entry PG13.5 Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Solar Lighting Luminaires

Solar Lighting Luminaires
  • Model No PO29
  • Series POWERMISSION 2
The solar powered PowerMission series has developed specifically to fulfill the remote demanding conditions of road and street lighting applications, are highly flexible and can be easily retrofitted onto existing street lighting infrastructure making it a state-of-the-art technology that is practical and affordable. Industry leading optical technology that minimizes light pollution and optimizes light distribution ensures that only the targeted areas are illuminated, reducing unwanted light trespass and sky glow. This characteristic ensures PowerMissions compliance to the Dark Sky requirements. Simple to install and maintain. Green energy and environmentally friendly. Reduces operating and energy cost. Safe and efficient. Integrated Lighting Control System. Excellent quality with a selection of light distributions and luminaire designs. Application: streets & areas, parking areas, garden areas, residential, areas and security areas.
View Complete Details
Ask Latest Price & Details
Area Lighting Luminaires

Area Lighting Luminaires
  • Model No. MA-97091
A small size pole mount area light The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. The high ingress protection allows these luminaires to be mounted for downward lighting. The Mar can be aimed to suit specific light patterns with the adjustable arm. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications and dark sky concerns. Designed for lighting private roadways, car parks, exhibition areas, service stations, truck stops and sports grounds.
View Complete Details
Ask Latest Price & Details
Martini Street Lighting Luminaires

Martini Street Lighting Luminaires
  • Model No. MN-91261
Slim size modern shape area Light with different distribution options. A high quality lens optics design provides a broad spread and forward throw light distribution dark sky concerns. The high ingress protection allows these luminaires to be mounted for downward lighting. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications and dark sky concerns. Designed for lighting private roadways, car parks, exhibition areas, service stations, truck stops and sports grounds.
View Complete Details
Ask Latest Price & Details
Quantum RGBW Street Lighting Luminaires

Quantum RGBW Street Lighting Luminaires
  • Model No. QA-21022
The medium sized pole mounted Quantum series brings a new look to Ligman outdoor area and parking area. This series offers premium Ligman RGBW Symmetrical Type V light distribution optics, and the luminaire is tilt adjustable up to 0-45 degrees. Designed for contemporary city scapes, architectural office building areas, public areas, and civic plazas. Quantum offers the specifier a new look with well controlled lighting optics.
View Complete Details
Ask Latest Price & Details
Quantum Street Lighting Luminaires

Quantum Street Lighting Luminaires
  • Model No. QA-21021
The medium sized pole mounted Quantum series brings a new look to Ligman outdoor street and parking area luminaires. This series offers premium Ligman Asymmetrical type II, III, IV and Symmetrical Type V light distribution optics, and the luminaire is tilt adjustable up to 0-45 degrees. Designed for contemporary city scapes, architectural office building areas, public areas, and civic plazas. Quantum offers the specifier a new look with well controlled lighting optics.
View Complete Details
Ask Latest Price & Details
Triangle Street Lighting Luminaires

Triangle Street Lighting Luminaires
  • Model No. TR-96141
A small size pole mount area light. The high ingress protection allows these luminaires to be mounted for downward lighting. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications and dark sky concerns. Designed for lighting private roadways, car parks, exhibition areas, service stations, truck stops and sports grounds.
View Complete Details
Ask Latest Price & Details
Vekter Street Luminaires

Vekter Street Luminaires
  • Model No. VK-90001
  • Lamp 24 LED
The innovative street and area luminaires that are ideal for completion of outdoor projects. Inspire by Vekter surface wall and bollard range, Top luminaire is adjustable for feature application. Designed for residential and shopping areas, squares and parks. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum frame and body with high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The housing is powder coating with high corrosion resistance and chemical chromatized protection. Integral control gear.
View Complete Details
Ask Latest Price & Details
Syndy Oval Asymmetrical Indirect Light Luminaires

Syndy Oval Asymmetrical Indirect Light Luminaires
  • Model No. SY-20643
  • Lamp 1 COB
A post top luminaire with excellent downward indirect asymmetrical light distribution and visual appeal. The precision optical system gives very low glare rating, while reducing light pollution. Developed to compliment Syndy oval indirect wall mount and street lanterns. Also environments where lighting is required to be uniform and glare free. The light from the built-in high power floodlight is directed by the oval top reflector set at 18 degree to ensure optimal light distribution.
View Complete Details
Ask Latest Price & Details
Benton Light Column Luminaire

Benton Light Column Luminaire
  • Model No. BE-20001
  • Lamp 1 COB
Stylish cylindrical columns with downlight distribution with optimal visual comfort though excellent glare control design. Designed to complement the Benton bollard, these columns feature square profile and four sided distribution which is perfect in optical focusing and high efficiency for a long service lifetime of performance. Main applications are for providing wide spread ground illumination for pedestrian precincts, building surroundings, shopping centers & squares where dark sky concerns are required.
View Complete Details
Ask Latest Price & Details
Vancouver Light Column Luminaire

Vancouver Light Column Luminaire
  • Model No. VA-20001
  • Series VANCOUVER 1
  • Weight 55.0 kg.
Stylish square columns with downlight distribution with optimal visual comfort though excellent glare control design. Designed to complement the Vancouver bollard, these columns feature square profile and four sided distribution which is perfect in optical focusing and high efficiency for a long service lifetime of performance. Main applications are for providing wide spread ground illumination for pedestrian precincts, building surroundings, shopping centers & squares where dark sky concerns are required. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours.
View Complete Details
Ask Latest Price & Details
Rado Recessed Location Luminaires

Rado Recessed Location Luminaires
  • Power 4 W
  • Model RA-40531
  • Lamp 1 COB
  • Height 155
  • Weight 1.0 kg.
A range of rectangular and square wall recessed luminaires, with an indirect optical system, offering high vandal resistance. Suitable for indoor or outdoor applications such as footpaths, squares, entrances and stairs. A recessed lamp eliminates all discomfort glare. Light is directed to the ground, providing illumination where it is needed and minimizing light spill. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminum housing with a high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and toughened glass diffuser. Double cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Lightalk RGBW Recessed Wall Luminaires

Lightalk RGBW Recessed Wall Luminaires
  • Power 33 W
  • Dimension 10° 13° 24° 43° 16°x35°
  • Weight 4.3 kg.
  • Model LA-40013
  • Lamp 20 LED
Lightalk recessed wall luminaires are designed to offer functional, a wide range of lighting solutions for use in gardens, residential areas, shopping areas, parks and pedestrian areas. Lightalk are suitable for many other applications including commercial and ancient or modern architectural interiors exteriors. Main characteristics are colour brightness. Thanks to the different lengths of the modules, the luminaire installation can be tailored exactly to meet the architectural structure. The luminaire rated as CLASS I with integral driver. Lightalk 10 is excellent for solid-state-lighting RGBW colour changing. The LED life time >50, 000 Hours. A small profile low copper content die-cast aluminum and extruded aluminum with high corrosion resistance. Aluminium end caps by one cap provided one cable gland M25 entry for wiring is standard. And two cable glands M25 is available upon requested. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear or frosted toughened glass. Luminaire is available in 2 lengths. Aluminium front frame is powder paint with high corrosion resistance with chemical chromatised protection.
View Complete Details
Ask Latest Price & Details
Nevada RGBW Inground Luminaires

Nevada RGBW Inground Luminaires
  • Model NE-60834
  • Lamp 1 LED
  • Power 5 W
  • Weight 0.46 kg.
The small LED Inground luminaires with a round stainless steel front ring, used to illuminate optionally as location luminaires or floodlights. Suitable for shopping or commercial building and pedestrian areas, parks, gardens and sculptures with low glare. Nevada 2 is CLASS III. RGBW full colours render for each LEDs and life time 50, 000 Hours. Low copper content aluminum housing with high corrosion resistance. The 3mm. thick front ring is available in grade 316 stainless steel. Supplied with 0.5m. 2x0.5 sqmm. of outdoor power cable. Durable silicone rubber gasket. Stainless steel fasteners in grade 316. Clear toughened 8mm. thickness glass. Walk over 200 kgs. maximum. Body is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Recessing box in HDPE is included. To ensure efficient drainage, gravel must be used to a depth of 450mm. and width of 300mm. beneath the housing, and should also be placed around the luminaire.
View Complete Details
Ask Latest Price & Details
Mask Inground Luminaires

Mask Inground Luminaires
  • Model MK-60249
  • Lamp 1 COB
  • Power 4 W
  • Weight 4.4 kg.
Inground luminaires for illuminating the ground and horizontal surfaces with light distribution options from one, two or four sectors. Designed for use in shopping, pedestrian & park areas. Main characteristics are low glare. These products are suitable for general public areas that encounter high pressure loads from automobiles. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Fasteners in grade 316 stainless steel. Durable silicone rubber gasket and clear glass lens. Body and frame constructed in low copper content die-cast aluminum with high corrosion resistance. Power is provided through a single PG13.5 watertight cable gland. Two PG13.5 cable glands are available upon request. Recessing box in high density polyethylene. To ensure efficient drainage, gravel must be used to a depth of 450mm. and width of 300mm. beneath the housing, and should also be placed around luminaire. Pressure load 1000Kg. is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire but the speed must not exceed 10 kmh.
View Complete Details
Ask Latest Price & Details
Lightalk Inground Uplight Luminaires

Lightalk Inground Uplight Luminaires
  • Model LA-60001
  • Lamp 18 LED
  • Power 28 W
  • Dimension 12° 14° 24° 44° 18°x35°
Lightalk inground fixtures are suitable for RGBW colour changing and static white color and are suited for wall grazing, column lighting and uplight installations. The Luminaires are suitable for many applications including commercial, historic or modern architectural interiors and exteriors. The different length options allow the luminaire installation to be tailored exactly to meet the architectural structure. The luminaire rated as CLASS I with integral driver. Lightalk 1 is white light 3000K and 4000K, LED CRI >80 and Lightalk 2 is designed for solid-state-lighting RGBW colour changing. The LED life time >50, 000 Hours. Asymmetrical distribution is available for Lightalk IWL. A small profile low copper content die-cast aluminum and extruded aluminum body with high corrosion resistance. Power is provided through a single watertight cable gland. Two cable glands are available upon request. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened 8mm. thickness glass with a walk over rating of 500Kg. maximum load. The luminaire is available in 2 lengths with a standard stainless steel grade 316 frame. Main housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. A60951 and A61051 are recessing box accessory must be ordered separately.
View Complete Details
Ask Latest Price & Details
Kios Symmetrical Inground Luminaires

Kios Symmetrical Inground Luminaires
  • Model KI-60485
  • Lamp 2 x 3 LED
  • Power 7 W
  • Weight 4.4 kg.
The small and medium size shallow LED inground uplights. Round and square surface stainless steel 304 front ring for use in buildings, shopping mall and pedestrian areas for illuminating squares, parks, gardens, sculptures, flag poles and tress. Main characteristics are low glare and the limited maintenance concept. This LED product has a standard touchable glass ideally suited for spaces that are used by the general public. Optionally with clear or frost glass as diffuser. The luminaire rated as CLASS I with integral driver. Available with LED white light 3000K and 4000K, LED CRI >80 and RGBW colour changing. The LED life time >50, 000 Hours. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Power is provided to the integral driver through a single PG13.5 watertight cable gland. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear or frosted toughened glass 15mm. thick glass, 2000Kg. load is transferred by the housing to the foundation. Vehicles with pneumatic tires can drive over the luminaire but the speed must not exceed 50Kmh. The distance between the floodlight and the illuminated surface should be at least 0.5m. To ensure efficient drainage, gravel must be used to a depth of 450mm. and a width of 300mm. beneath the housing and should also be placed around the luminaire. Recessing box in high density polyethylene. Optional ADA anti slip surface.
View Complete Details
Ask Latest Price & Details
Lightalk RGBW Inground Uplight Luminaires

Lightalk RGBW Inground Uplight Luminaires
  • Model LA-60013
  • Lamp 20 LED
  • Power 33 W
  • Dimension 10° 13° 24° 43° 16°x35°
  • Weight 4.9 kg.
Lightalk inground fixtures are suitable for RGBW colour changing and static white color and are suited for wall grazing, column lighting and uplight installations. The Luminaires are suitable for many applications including commercial, historic or modern architectural interiors and exteriors. The different length options allow the luminaire installation to be tailored exactly to meet the architectural structure. The luminaire rated as CLASS I with integral driver. Lightalk 2 is designed for solid-state-lighting RGBW colour changing. The LED life time >50, 000 Hours. A small profile low copper content die-cast aluminum and extruded aluminum body with high corrosion resistance. Power is provided through a single watertight cable gland. Two cable glands are available upon request. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened 8mm. thickness glass with a walk over rating of 500Kg. maximum load. The luminaire is available in 2 lengths with a standard stainless steel grade 316 frame. Main housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Oregon Underwater Luminaires

Oregon Underwater Luminaires
  • Model OR-60895
  • Lamp 1 LED
  • Power 4 W
  • Weight 0.6 kg.
A compact recessed underwater projector for swimming pools, synthetic pools, pools and water pools for public or private areas. Replaceable led module. The luminaire rated as CLASS III. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Stainless steel grade 316 body. Stainless steel fasteners in grade 316. Cable entry PG.7 cable gland supplied with 2m 2x0.5sqmm. of outdoor submersible power cable. Durable silicone rubber gasket and clear toughened glass. Remote driver required to be installed by others. Recessing box in HDPE is included. Maximum depth 1 meter. Suitable for recessed mount. The floodlight must be submerged when operational. Accessory must be ordered separately. Remote driver is not included.Remote IP gear box is not included.
View Complete Details
Ask Latest Price & Details
Nemo Underwater Luminaires

Nemo Underwater Luminaires
  • Model NM-50001
  • Lamp 1 COB
  • Power 14 W
  • Dimension 69 89 43
  • Weight 0.8 kg.
A compact surface mounted underwater projector for facades, columns, bridges mounuments, swimming pools, synthetic pools, pools and water pools for public or private areas. Replaceable led module. with LED 36 VDC. The luminaire rated as CLASS III. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. A variety of beam spreads are available to suit the application requirements. Stainless steel grade 316 body. Stainless steel fasteners in grade 316. Cable entry PG7 for Nemo 1 and PG11 for Nemo 2 and Nemo3. cable gland supplied with 2m 2x1.0sqmm. of outdoor submersible power cable. Durable silicone rubber gasket and clear toughened glass. Maximum depth 2 meter. The floodlight must be submerged when operational. Accessory must be ordered separately. Remote driver is included and required to be installed by others.
View Complete Details
Ask Latest Price & Details
Janet Underwater Luminaires

Janet Underwater Luminaires
  • Model JA-60067
  • Lamp 3 LED
  • Power 8 W
  • Weight 1.6 kg.
A compact recessed underwater projector for lighting swimming pools, synthetic pools, pools and water jets of up to 2m in height. The luminaire rated CLASS III included with remote driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Stainless steel grade 316 body. Stainless steel fasteners in grade 316. Cable entry PG.11 cable gland supplied with 2m of outdoor submersible power cable. Durable silicone rubber gasket and clear toughened glass. The floodlight must be submerged when operational. Remote driver required to be installed by others. Recessing box in stainless steel 316 grade. Remote driver is included and required to be installed by others.
View Complete Details
Ask Latest Price & Details
Aqua Underwater Luminaires

Aqua Underwater Luminaires
  • Model AQ-60001
  • Lamp 1 COB
  • Weight 1.1 kg.
  • Dimension 100 88 124
A compact recessed underwater projector for swimming pools, synthetic pools, pools and water pools for public or private areas. Replaceable led module. with LED 36 VDC. The luminaire rated as CLASS III. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. A variety of beam spreads are available to suit the application requirements. Stainless steel grade 316 body. Stainless steel fasteners in grade 316. Cable entry PG7 for Aqua 1 and PG11 for Aqua 2 and 3. Cable gland supplied with 2m 2x1.0sqmm. of outdoor submersible power cable. Durable silicone rubber gasket and clear toughened glass. Maximum depth 2 meter. Suitable for recessed mount. The floodlight must be submerged when operational. Accessory must be ordered separately. Recessing box in PVC is included.Remote driver is included and required to be installed by others.
View Complete Details
Ask Latest Price & Details
Annet Underwater Luminaires

Annet Underwater Luminaires
  • Model AE-50177
  • Lamp 3 LED
  • Power 8 W
  • Weight 1.1 kg.
A compact surface mounted underwater projector for lighting pools and synthetic pools and water jets of up to 2m in height. The luminaire rated CLASS III included with remote driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Stainless steel grade 316 body. Stainless steel fasteners in grade 316. Cable entry PG.11 cable gland supplied with 2m of outdoor submersible power cable. Durable silicone rubber gasket and clear toughened glass. The floodlight must be submerged when operational. Remote driver is included and required to be installed by others.Remote IP gear box is not included.
View Complete Details
Ask Latest Price & Details
Harrier Inground Luminaires

Harrier Inground Luminaires
  • Model HA-60036
  • Lamp 12 LED
  • Power 3 W
  • Dimension 38°C 120 150 118
  • Weight 0.7 kg. 0.5 kg.
A top range of inground uplights with a choice of round or square stainless steel or aluminum front rings, used to illuminate shopping malls and pedestrian areas, parks, gardens and sculptures. Main characteristics are low glare. This product has a standard touchable glass ideally suited for spaces used by the general public. The luminaire rated as CLASS I or CLASS III with integral and remote driver depened on product. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminum housing with high corrosion resistance. The 6mm thick front ring is available in grade 316 stainless steel or aluminum. Stainless steel fasteners in grade 316. Power is provided through a single watertight cable. Durable silicone rubber gasket and clear toughened 10mm. thick glass, walk over 200 kgs. maximum. Body is treated with a chemical chromatized protection before powder coating. To ensure efficient drainage, gravel must be used to a depth of 450mm. beneath the housing, and should also be placed around the luminaire. Optional: Remote box in aluminium for remote driver. Recessing box in high density polyethylene. Optional ADA anti slip surface.
View Complete Details
Ask Latest Price & Details
Jet Pendant Luminaires

Jet Pendant Luminaires
  • Model JE-95081
  • Lamp 1 COB
  • Power 14 W
  • Weight 1.8 kg.
  • Dimension 102
A range of cylindrical and square shape pendant exterior downlight luminaires. The luminaires are suitable for indoor and outdoor applications for use in residential, shopping and public areas as a pendant downlight. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminium housing with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Stainless steel screws 316 grade. Suspension kit is stainless steel 304 grade. Power is provided to the luminaire through water tight single cable gland. Durable silicone rubber gasket and clear toughened glass. Suspension height fully adjustable.
View Complete Details
Ask Latest Price & Details
Duomo Pendant Luminaires

Duomo Pendant Luminaires
  • Model DU-95036
  • Lamp 1 COB
  • Power 41 W
  • Weight 10.0 kg.
A pendant luminaire with a small and medium size shade decorative lantern and symmetrical light distribution using energy saving compact fluorescent as well as metal halide and high pressure sodium lamps. Developed to compliment with the Duomo bollard and post top. Designed for lighting entrances, retail outlets, malls and showrooms. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Painted galvanized steel pendant rod, low copper content die cast housing with high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and opal glass diffuser. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
PowerVision Surface High Bay Luminaires

PowerVision Surface High Bay Luminaires
  • Model PW19
  • Lamp 24 LED
  • Power 27 W
  • Length 408
  • Weight 9.0 kg.
Engineered from the base up with environmental consciousness and energy efficiency in mind, LIGMANs PowerVision series, developed specifically to fulfill the demanding conditions of industry, warehouse, manufacturing and production hall applications. The luminaire has flexibility to choose from three easy installation method whether by hook, pendant or bracket. With LED technology, downtime caused by power failure is drastically reduced as the PowerVision highbay lowbay switches on instantly as compared to traditional HID lamps.Industry leading optical technology that minimizes light pollution and optimizes light distribution ensures that only the targeted areas are illuminated. The luminaire rated as CLASS I with integral driver, available optional light distributions. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. A high quality aluminum extrusion not only houses the control gear and the light modules but it also acts as the primary thermal management device, eliminating the need for additional and sometimes bulky heat sinks while improving the overall performance and extending the life span of the LEDs. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatised protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Mustang Surface High Bay Luminaires

Mustang Surface High Bay Luminaires
  • Model MS-91132
  • Lamp 24 LED
  • Power 39 W
  • Weight 8.5 kg.
Small size rectangular shape surface mounted high bay side throw light distribution for power LED lamp. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications. Designed for lighting of sports facilities, warehouses, factories and under canopy lighting. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Power is provided through a single PG11 watertight cable gland. Aluminium housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatised protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Mustang Recessed High Bay Luminaires

Mustang Recessed High Bay Luminaires
  • Power 39 W
  • Model MS-91181
  • Lamp 24 LED
  • Weight 8.5 kg.
Small size rectangular shape recessed mounted high bay side throw light distribution for power LED lamp. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications. Designed for lighting of sports facilities, warehouses, factories and under canopy lighting. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Power is provided through a single PG11 watertight cable gland. Aluminium housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatised protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Vekter Wall Luminaires

Vekter Wall Luminaires
  • Model VK-30001
  • Lamp 12 LED
  • Power 20 W
  • Weight 3.2 kg.
  • Dimension 260 195 80
A medium and large LED wall luminaire range with optional type II, III, IV and symmetrical M, W and EW light distributions for different installations in Height and spacing. Luminaires can be used for direct downlight or indirect uplight. Vekter is suitable for lighting footpaths, car parks, building facades, entrances, under canopies and signs or possibility for indirect uplight applications. Vekter 9, 10 come with adjustable mounting box while Vekter 7, 8 come with arm mounting both for floodlighting application. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum frame and body with high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The housing is powder coating with high corrosion resistance and chemical chromatized protection.
View Complete Details
Ask Latest Price & Details
Triangle Wall Area Luminaires

Triangle Wall Area Luminaires
  • Model TR-31711
  • Lamp 24 LED
  • Power 39 W
  • Weight 20.1 kg.
As small size wall mount area light with high ingress protection allows these luminaires to be mounted for downward lighting applications. The Triangle can be aimed to suit specific light patterns with the adjustable arm. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications and dark sky concerns. Designed for lighting private roadways, car parks, exhibition areas, service stations, truck stops and sports grounds. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant aluminum body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened glass. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Tango Wall Surface Luminaires

Tango Wall Surface Luminaires
  • Model TA-31861
  • Lamp 16 LED
  • Power 37 W
  • Weight 4.4 kg.
Wall luminaires with a selection of beam distributions for various downward or upward lighting requirements. Designed to illuminate the wall surface and areas. They are suitable for many applications such as residential and pedestrian areas, shopping malls, parks and gardens, as well as commercial, historical or modern architectural interiors and exteriors. The luminaire rated as CLASS I with integral driver, available in Asymmetrical light distribution for Type II, III , and IV. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminum housing and frame. Stainless steel fasteners in grade 316. High efficiency PMMA lens. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Sandy Surface Mounted Luminaires

Sandy Surface Mounted Luminaires
  • Power 20 W
  • Model SA-31471
  • Lamp 40 LED
  • Weight 2.1 kg.
A range of small and large circular wall mounted bulkheads with polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Sandy has a subtle chamfered frame and it can be given a more striking appearance by way of adding different grill and visor options. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum housing and frame. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant UV stabilized polycarbonate diffuser. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Quarter Wall Area Luminaires

Quarter Wall Area Luminaires
  • Model QU-31344
  • Lamp 24 LED
  • Power 40 W
  • Weight Weight
A small quarter-cylindrical wall mounted luminaire. Light output is finely controlled to minimize light pollution with three types of light distribution. Asymmetrical type II, III, IV lens optics suitable for most kind of applications and dark sky concerns. Flat toughened glass cover for minimum spill light. Designed for the illumination of entrances, terraces, corridors and building facades. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Paletta Surface Mounted Luminaires

Paletta Surface Mounted Luminaires
  • Power 20 W
  • Model PA-31572
  • Lamp 40 LED
  • Weight 3.0 kg.
  • Size 265 x 265
A range of square wall mounted bulkheads with opal impact resistant polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant UV stabilized polycarbonate diffuser. The LED luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Mustang Wall Area Luminaires

Mustang Wall Area Luminaires
  • Model MS-31191
  • Lamp 24 LED
  • Power 39 W
  • Weight 8.5 kg.
Small size rectangular shape wall mounted area light The luminaires are suitable for downward light distribution with adjustable mounting bracket. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications and dark sky concerns. Designed for lighting footpaths, car parks, building facades, under canopies and roads. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Power is provided through a single PG11 watertight cable gland. Low copper content corrosion resistant aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Matrix Square Wall Luminaires

Matrix Square Wall Luminaires
  • Model MT-31396
  • Lamp 2 COB
  • Power 21 W
  • Weight 2.1 kg.
Compact cubic wall mounted luminaires with up and downward light distributions. The Matrix is designed with three options of light distributions. Designed to illuminate the wall and surface in front of wall and for light accents on vertical or horizontal surfaces. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Marvik Wall Surface Luminaires

Marvik Wall Surface Luminaires
  • Model MV-30001
  • Lamp 1 COB
  • Power 11 W
  • Weight 1.6 kg.
A new accentuating wall luminaire with hidden fasteners & smart mechanical design and modern design. The luminaire with cylindrical body comes with high-efficiency LED modules and a variety of distribution optics. These luminaires are suitable for various faade lighting requirements along with accent lighting, building columns, architectural highlighting, etc. The luminaire rated as CLASS I with integral driver, available in narrow, medium, wide and very wide beams. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content die-cast aluminum housing and frame. Stainless steel fasteners in grade 316. High efficiency optical reflector. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Option: Die-cast aluminum step baffle frame is available.
View Complete Details
Ask Latest Price & Details
Martini Wall Area Luminaires

Martini Wall Area Luminaires
  • Model MN-31671
  • Lamp 24 LED
  • Power 39 W
  • Weight 8.3 kg.
Slim size modern shape wall area light with a variety of different light distributions. A high quality lens optic design provides a broad light pattern and forward throws light distributions. The Martini complies with international dark sky requirements when mounted horizontally. Main application is for lighting of roads, car parks, public footpaths, building facades and under canopies. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Aluminium housing with high corrosion resistance. Single cable entry PG 11. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened glass with hinged aluminium frame for in-position lamp replacement. Main housing is powder coated with high corrosion resistance with chemical chromate protection.
View Complete Details
Ask Latest Price & Details
Mar Wall Area Luminaires

Mar Wall Area Luminaires
  • Model MA-31621
  • Lamp 24 LED
  • Power 39 W
  • Weight 15.5 kg.
A cylindrical shape wall mount area light The luminaires are suitable for downward lighting at a 5 degree tilt using a classical arm bracket. Asymmetrical type II, III, IV and symmetrical lens optics suitable for most kind of applications and dark sky concerns. Designed for lighting footpaths, car parks, building facades, under canopies and roadways. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Single cable entry. Low copper content corrosion resistant aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Lightwave Wall Luminaires

Lightwave Wall Luminaires
  • Model LW-30001
  • Lamp 1 COB
  • Power 20 W
  • Weight 1.9 kg.
A decorative LED wall washer luminaire with a circular light emission on the surrounding surface to enhance wall material detail while giving the luminaire distinctive character. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum frame and body with high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear impact UV stabilized polycarbonate lens. The housing is powder coating with high corrosion resistance and chemical chromatized protection.
View Complete Details
Ask Latest Price & Details
Light Linear PT Wall Area Luminaires

Light Linear PT Wall Area Luminaires
  • Model LI-30021
  • Lamp 12 LED
  • Power 28 W
  • Weight 4.9 kg.
Light Linear PT wall light LED incorporates scalable light modules designed for lighting of entrances and residential areas. Industry leading optical technology ensures that only the targeted areas are illuminated, reducing unwanted light trespass. Long service life and vandal resistance are the further characteristics of this compact wall light. Matching street and area lighting and bollard. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum housing with high corrosion resistance. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened glass. The housing is powder coating with high corrosion resistance and chemical chromatized protection.
View Complete Details
Ask Latest Price & Details
Jet Wall Luminaires

Jet Wall Luminaires
  • Model JE-30351
  • Lamp 1 COB
  • Power 15 W
  • Weight 2.2 kg.
  • Dimension 102 189 218 150
Wall luminaires with a full selection of beam distributions for various downward lighting requirments. Designed to illuminate the wall surface and for light accents on vertical surfaces. They are suitable for many other applications such as residential and pedestrian areas, shopping malls, parks and gardens as well as commercial, historical or modern architectural interiors and exteriors. The luminaire rated as CLASS I with integral driver. Jet 3X is white light 2700K, 3000K and 4000K, LED CRI >80 and Jet 5X is perfect for solid-state-lighting RGBW colour changing. The LED life time >50, 000 Hours. Low copper content die-cast aluminium housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Jet RGBW Wall Luminaires

Jet RGBW Wall Luminaires
  • Model JE-30393
  • Lamp 7 LED
  • Power 33 W
  • Dimension 160 301 262 202
  • Weight 4.3 kg.
Wall luminaires with a full selection of beam distributions for various downward lighting requirements. Designed to illuminate the wall surface and for light accents on vertical surfaces. They are suitable for many other applications such as residential and pedestrian areas, shopping malls, parks and gardens as well as commercial, historical or modern architectural interiors and exteriors. The luminaire rated as CLASS I with integral driver. Jet 5X is perfect for solid-state-lighting RGBW colour changing. The LED life time >50, 000 Hours. Low copper content die-cast aluminium housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear toughened glass. Single cable entry. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Itac Surface Mounted Luminaires

Itac Surface Mounted Luminaires
  • Power 20 W
  • Model IT-31962
  • Lamp 40 LED
  • Weight 2.9 kg.
A range of circular wall mounted bulkheads with vandal resistant polycarbonate diffuser that gives off a subtle sidelight. Ideal for numerous indoor or outdoor applications. The luminaire rated as CLASS I with integral driver. Colour temperature 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum housing and frame. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant UV stabilized polycarbonate diffuser. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Gino Wall Luminaires

Gino Wall Luminaires
  • Model GI-31581
  • Lamp 2 x 1 COB
  • Power 8 W
  • Height 81
  • Weight 1.0 kg.
Wall mounted luminaires with upward and downward light distributions. Ideally suited to illuminate wall and surfaces, all possible to create light accents on vertical surfaces using LED lamp. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and impact resistant toughened glass diffuser The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Veranda Pillar Light Luminaires

Veranda Pillar Light Luminaires
  • Model VR-70273
  • Lamp 4 x 1 COB
  • Power 15 W
  • Weight 5.6 kg.
The innovative optical technology designed for the pillar light guarantees a high degree of efficiency and optimal visual comfort while fulfilling dark sky requirements. Veranda has been developed to provide excellent controlled downward light distribution which eliminates any glare. It has three light shields with different light distributions. Designed for lighting of entrances, gardens, pathways & squares. The luminaire rated as CLASS I with integral driver. Colour temperature 2700K, 3000K and 4000K, LED CRI >80 and life time 50, 000 Hours. Die-cast aluminum body and low copper content housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket and clear impact resistant UV stabilized polycarbonate lens. Double cable entry PG13.5 Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Light Linear Wall Washer Luminaire

Light Linear Wall Washer Luminaire
  • Model LI-30611
  • Lamp T5 (T16) FH
  • Power 14 W
  • Weight 2.7 kg.
Light linear luminaires are designed to be multi functional, offering a wide range of lighting solutions and dramatic highlighting effects of architectural facades of buildings. They are suitable for many applications in residential and pedestrian areas, as well as in shopping malls, parks and gardens, including commercial, historic or modern architectural interiors and exteriors. The luminaires have features such as long life, limited maintenance and constant lifetime performance. A small profile die-cast aluminum and extruded aluminum body with high corrosion resistance. Power is provided through a single PG11 watertight cable gland. Two PG11cable glands are available upon request. Stainless steel mounting hardware. Durable silicone rubber gasket and clear toughened 8mm. (0.31) thick glass . Anodized high purity aluminum reflector offering a choice of asymmetrical or bi-symmetrical reflectors. For use with T5 fluorescent lamps, operating from an integral electronic ballast. The luminaire is available in 4 lengths and is suitable for up or down lighting. Housing is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance.
View Complete Details
Ask Latest Price & Details
Classic Surface Mounted Luminaires

Classic Surface Mounted Luminaires
  • Power 18 W
  • Model CL-30282
  • Lamp TC-D
  • Weight 3.1 kg.
A range of square bulkheads with flat sheet impact resistant polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. The Classic1 can be given a more striking appearance by using the grille frame. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel screws. Durable silicone rubber gasket and impact resistant UV stabilized polycarbonate diffuser. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral control gear.
View Complete Details
Ask Latest Price & Details
Capsule Surface Mounted Luminaires

Capsule Surface Mounted Luminaires
  • Power 18 W
  • Model CA-30302
  • Lamp TC-D
  • Weight 2.6 kg.
A range of capsule shape bulkheads with polycarbonate diffuser. Ideal for numerous indoor or outdoor applications. Capsule 1, 2, 3 and 4 can be given a more striking appearance by optional grille attachments. While Capsule 5 has a visor option to eliminate uplight. Low copper content corrosion resistant die-cast aluminum frame and body. Stainless steel screws. Durable silicone rubber gasket and impact resistant UV stabilized polycarbonate diffuser. The luminaire is treated with a chemical chromatized protection before powder coating, ensuring high corrosion resistance. Integral control gear
View Complete Details
Ask Latest Price & Details
Wall Mounted Luminaire

Wall Mounted Luminaire
  • Model PI-80001
  • Weight 2.2 kg.
  • Lumen 1766 lm
Eco-friendly LED product for energy saving and visual consistency. Durability with future proofing. Extremely energy efficient with output equivalent to a 40W T5, up to 25% energy consumption. Dimming options available. No LEDs visible due to the specifically designed lens. Soft upward illumination through the sides of the lens. Excellent CRI for actual colour reproduction.
View Complete Details
Ask Latest Price & Details
Roy Projector Luminaire For Track Light

Roy Projector Luminaire For Track Light
  • Model RY-80001
  • Weight 0.35 kg.
  • Dimension 49 x 204 x 177 mm
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Tilt 90. Rotation 355. Universal adaptor compatable with Staff, Norlux, Global, Nuco and Nordic track light.
View Complete Details
Ask Latest Price & Details
Tuscon Recessed Four Directional Luminaire

Tuscon Recessed Four Directional Luminaire
  • Model TS-80001
  • Lumen 2970 lm
  • Weight 1.79 kg.
  • Dimension 490 x 112 mm.
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Adjustable 30 LED Module. System power: 34W, 47W, 59W, 79W and 115W Lumen: 2379 - 12540lm Colour Consystency: CRI >80 Colour binning: 3-step MacAdam Life time: 50000h @ L70 Universal input voltage: 100-240V AC 5060Hz
View Complete Details
Ask Latest Price & Details
Rocky Recessed Single Directional Luminaire

Rocky Recessed Single Directional Luminaire
  • Model RC-80001
  • Lumen 743 lm
  • Dimension 130 x 112 mm.
  • Weight 0.49 kg.
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Adjustable 30 LED Module. System power: 9W, 12W, 15W, 20W and 29W Lumen: 595 - 3135lm Colour Consystency: CRI >80 Colour binning: 3-step MacAdam Life time: 50000h @ L70 Universal input voltage: 100-240V AC 5060Hz
View Complete Details
Ask Latest Price & Details
Norton Recessed Four Directional Luminaire

Norton Recessed Four Directional Luminaire
  • Model NO-80001
  • Lumen 2970 lm
  • Dimension 250 x 112 mm.
  • Weight 1.77 kg.
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Adjustable 30 LED Module. System power: 34W, 47W, 59W, 79W and 115W Lumen: 2379 - 12540lm Colour Consystency: CRI >80 Colour binning: 3-step MacAdam Life time: 50000h @ L70 Universal input voltage: 100-240V AC 5060Hz
View Complete Details
Ask Latest Price & Details
Jasper Recessed Directional Luminaire

Jasper Recessed Directional Luminaire
  • Model JS-80001
  • Lumen 448 lm
  • Dimension 95 x 60 mm.
  • Weight 0.26 kg.
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Adjustable 30 LED Module. System power: 6W, 9W, 12W, 15W, 20W, 29W and 39W Lumen: 339 - 4055lm Colour Consystency: CRI >80 Colour binning: 3-step MacAdam Life time: 50000h @ L70 Universal input voltage: 100-240V AC 5060Hz
View Complete Details
Ask Latest Price & Details
Hugo Recessed Triple Directional Luminaire

Hugo Recessed Triple Directional Luminaire
  • Model HU-80001
  • Lumen 2228 lm
  • Dimension 370 x 112 mm.
  • Weight 1.42 kg.
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Adjustable 30 LED Module.System power: 26W, 35W, 44W, 59W and 86W Lumen: 1785 - 9405lm Colour Consystency: CRI >80 Colour binning: 3-step MacAdam Life time: 50000h @ L70 Universal input voltage: 100-240V AC 5060Hz
View Complete Details
Ask Latest Price & Details
Hays Recessed Low Glare Directional Luminaire

Hays Recessed Low Glare Directional Luminaire
  • Model HY-80001
  • Lumen 252 lm
  • Dimension 95 x 120 mm.
  • Weight Weight
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Adjustable 30 LED Module.System power: 6W, 9W, 12W, 15W, 20W and 29W Lumen: 162 - 2024lm Colour Consystency: CRI >80 Colour binning: 3-step MacAdam Life time: 50000h @ L70 Universal input voltage: 100-240V AC 5060Hz
View Complete Details
Ask Latest Price & Details
Cedar Recessed Double Directional Luminaire

Cedar Recessed Double Directional Luminaire
  • Model CD-80001
  • Lumen 1485 lm
  • Dimension 250 x 112 mm.
  • Weight 1.0 kg.
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction. Adjustable 30 LED Module.
View Complete Details
Ask Latest Price & Details
Baker Recessed Wallwasher Luminaire

Baker Recessed Wallwasher Luminaire
  • Model BK-80001
  • Lumen 451 lm
  • Dimension 115 x 120 mm.
  • Weight 0.66 kg.
Eco-friendly LED product for energy saving and visual consistency. Modular design for easy maintenance with future proofing. Propriety lens design for high LOR. Reliable thermal management for long life and lumen maintenance. Dimming options available. Excellent CRI for actual colour reproduction.System power: 9W, 12W, 15W, 20W, 29W and 39W Lumen: 430 - 2509lm Colour Consystency: CRI >80 Colour binning: 3-step MacAdam Life time: 50000h @ L70 Universal input voltage: 100-240V AC 5060Hz
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.