Input Specification: Container Height : 36mm to 75mm
Fill Capacity : 50 mg. to 1.5 gms with the help of change parts. Up to 6 gms filling by multiple dosing.
Compressed Air : Max. 2 Kg./Cm2 Oil Free
Input Specification: Container Diameter : 20mm, 28mm and 30mm Butyl
Accuracy : + 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh)
Optional Accessories : Pure Air Filter, Vacuum Pump, Oil Free Air Compressor, Online Pre-Media Filling Arrangement, Programmable Logic Control (System) with MMI Aluminum Profile Cabinet covering full machine
Overall Dimension : 2100mm (L) X 842mm (W) X 1700mm (H)
(Dimension include main machine with in-feed turn table)
Fill Accuracy : ±1% depending upon consistency and uniformity of bulk density of injectable powder
Powder Fill Size : 50 mg to 1.5 grams. Single Dose (with Change Parts)
1.5 grams to 6 grams. Double, Triple and Four Doses.
Fill range depending upon vial opening and bulk density of powder. Under controlled level of Humidity (i.e. 25%)
Powder Suction : Through Vacuum
Filling Speed : Up to 240 Vials/minute.
(Depending up on size/types of vial & powder density)
Powder Delivered : Through Air/Nitrogen (Customer to Provide)
Design : Left --> Right
Product Conveyor : 50 mm (2”) wide S. S. Slat conveyor
Stopper Delivered : Through Vibratory Bowl & Chute
Powder Delivered : Through Air/Nitrogen (Customer to Provide)
Fill Accuracy : ±1% depending upon consistency and uniformity of bulk density of injectable powder
Powder Suction : Through Vacuum
Product Conveyor : 50 mm (2”) wide S. S. Slat conveyor
Filling Speed : 120 Vials/minute
(Depending up on size/types of vial & powder density)
Stopper Delivered : Through Vibratory Bowl & Chute
Powder Fill Size : 50 mg to 1.5 grams. Single Dose (with Change Parts)
1.5 grams to 6 grams. Double, Triple and Four Doses.
Fill range depending upon vial opening and bulk density of powder. Under controlled level of Humidity (i.e. 25%)
The Automatic Injectable Powder Filling with Rubber Stoppering Machine Model DRYFILL-120i, is suitable for Round Vials with maximum speed of 120 Vials per minute. Specially Machine construction in fully Stainless Steel finish including machine frame...
Accuracy : ±1% depending upon consistency and the uniformity of bulk density of injectable powder, under controlled level of humidity (i.e.25%)
Electrical Supply : 1.5 HP For Main Drive.0.50 HP For Unscrambler0.50 HP For Scrambler.
Gross Weight : 1450 KGS. (Approx.)
Net Weight : 1250 KGS. (Approx.)
Fill Capacity : 50 Mg to 1.5 Grms. Single Dose (With Change Parts), 1.5 Grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of injectable powder
Production Rate : Up to 240 fills / min for Single DoseUp to 120 Fills / Min for Double DoseUp to 80 Fills / Min for Triple DoseUp to 60 Fills / Min for Four Dose
Dimensions : 4350 MM (L) X 1200 MM (W) X 1660 MM (H)
Injectable Vial Dry Powder Filling line Complete line of Injectable Vial Dry Powder Filling line like Injectable dry powder filling with rubber stoppering machine, Automatic Aluminium Vial cap sealing machine, Automatic Online Visual Inspection...
Automatic High Speed Injectable Powder Filling with Rubber Stoppering Machine is a Double wheel Double Track Powder Filling Machine with Vibratory Rubber Stoppering Unit to feed higher quantity of rubber stopper to the feeding chute for High Speed...
Vial Sizes : 5ml to 30ml Glass Vials (Dia. 22mm to 38mm)
Supply Type : Manufacturer
Harsiddh engineering Co. provides manufacturers a large variety of powder filling machines that caters for different manufacturer’s preferences and production environment. The double wheel injectable dry powder filling machine offers superior...
Filling Capacity : 50mg to 1.5 grams in single dose, 1.5 grams to 6 grams in double, triple and four dose (with help of change parts)
Powder Requirements : 3 Phase, 415 Volts, 50 Hz
Electrical Supply : 3 H.P.
Filling Accuracy : + 1 % depending upon consistency and uniformity of bulk density of sterile powder of under controlled level of humidity (Below 28% Rh)
Vial Sizes : 5ml to 30ml Glass Vials (Dia. 22mm to 38mm)
Gross Weight : 1400 Kgs.
Production Output : 80 to 240 vials per minute (Depend on fill size)
Rubber Stopper : 20mm (With the help of change parts)
We offer automatic injectable dry oowder filling with rubber stoppering machine. Model no. nkpf - 300sp direction left to right production rate up to 240 fillsmin. For 10 ml. Vial fill capacity 50 mg to 1.5 grms. Single dose (with help of change...
We offer utomatic injectable dry powder filling with rubber stoppering machine. Model no. nkpf - 150dp direction left to right production rate up to 120 fillsmin. For single dose. Up to 60 fillsmin. For double dose. Up to 40 fillsmin. For triple...
We are offering automatic six head injectable liquid filling machine model no. nklfrs - 150sp direction left to right production rate up to 100 to 120 vialsmin. (for 5ml. Fill size) fill capacity 0.5 ml to 100 ml ( up to 50 ml single dose & for 100...
Direction Left to Right Production Rate Up to 120 Fills/Min. for single dose. Up to 60 Fills/Min. for double dose. Up to 40 Fills/Min. for triple dose. Up to 30 Fills/Min. for four dose. Fill Capacity 50 Mg to 1.5 Grms. single dose (with help of...
Item Code: AEPF-120 Our organization is offering an extensive range of Injectable Powder Filling Machine Model No.AEPF -120, which has an over all dimension of 2200 mm (L) x 715 mm (W) x 1700mm (H). These Injectable Powder Filling Machine are...
Item Code: AEPF-240 Our range of High Speed Injectable Powder Filling Machine Model No.AEPF -240 is widely catering to the requirements of diverse industries such as pharmaceuticals, chemicals, cosmetics and food-beverages. These High Speed...
How many Injectable Machinery product listings are available in Ahmedabad?
In Ahmedabad, there are currently 36 Injectable Machinery products listed, offering a wide options available for purchase.
How many Ahmedabad-based Injectable Machinery manufacturers are there?
There are many Injectable Machinery manufacturers in Ahmedabad. You can explore ExportersIndia to find them and use filters to your search as per your specific requirements.
We specialize in manufacturing Injectable Liquid Filling Machine which are generally used in fill any type of liquid such as juices, petroleum jelly, phanna syrups, drinking water, paints, strainers, perfumes, flavored milk, dahi, adhesives,...
The machine will have single hopper & single wheel each the track. Negligible powder spillage will be there between hopper & wheel. Parts / Assemblies required to be autoclaved will be easily removable and reset with user friendly assemblies....
Direction Left to Right Production Rate Up to 240 FillsMin. for 10 ml. Vial Fill Capacity 50 Mg to 1.5 Grms. single dose (with help of change parts), 1.5 Grms to infinite number of doses. Fill range depending upon vial opening and bulk density of...
Injectable Powder Filling & Stoppering Machine Model – LPFS 100. The Basic Unit Consists Of One side Turn Tables, S.S. Slat Conveyor Belt, Unique powder wheel.The Machine Can Be Run Totally Through Touch Screen HMI, PLC Control And The Machine Is...
Overall Dimension : 2100mm (L) X 842mm (W) X 1700mm (H),2300mm (L) X 842mm (W) X 1700mm (H)
Container Diameter : 25mm to 38mm
Automatic Injectable Powder Filling & Rubber Stoppering Machine having eight ports in a powder wheel. The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine. Adinth offers two...
Injectable Liquid Filling Machine is suitable to fill injectable glass vials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built...
Injectable Powder Filling & Rubber Stoppering Machine Automatic Injectable Powder Filling & Rubber Stoppering Machine having eight ports in a powder wheel. The precision built welded steel frame is encompassed with stainless steel sheets with...
Customers can place bulk as well as urgent orders with us and we can assure timely & safe delivery of the same. Placed in Ahmedabad(India), is capable of catering to local as well as domestic markets without any hassle. Semi Automatic...
The sterile dry powder filling with rubber stoppering machine is a comprehensively designed compact sized model used for filling and stoppering of dry powder injectable into the vials. It comprises of a precision built frame that is coated with the...
Power Characteristics : 440v 3 Phase 50Hz 4 Wire System
Net Weight : 825 kgs
Automatic Injectable Powder Filling & Stoppering (Full & Half bunging) Machine. The Basic Unit Consists Of One Or both side Turn Tables, S.S. Slat Conveyor Belt, Unique powder wheel. The Machine Is And Can Be Run Totally Through Touch Screen HMI,...
Total Table top cGMP model. “NO VIAL, NO FILL” System eliminates wastage of costly powder. Spring loaded Teflon top seal for powder hopper reduces the friction between and top seal and avoid chance of white particle shading during production....
The company that leads the world in the development of all electric injection molding machines, NIIGATA's goal is to develop globally through innovative ideas and advanced technology, and to provide even greater satisfaction to its customers,...
For Buyer 
For Seller 
Help 
