Our Products
Straight Connection enables extension of water connection in an easy way
Tee Connection enables branching a water connection at right angle
Tehnical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body | Brass Forged |
Flow adjusting screw | Brass | |
Sizes | inlet & Oulet | W', 1 h", 1 1/2" and 2" (BSP) |
Pressure rating | 16 kg/cm2 |
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body | Cast Iron or can be supplied in Ductile Iron |
Sizes | Dia 210 x 200 mm ht but customized size- can be supplied if enough volumes | |
Colour | Lid is Blue/Black |
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body Flange,knob, spindle | Brass |
sizes | ½, 3/4, 1 inch | |
pressure rating | 16kg/cm2 | |
Colour | Natural Brassv |
Techhical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body | Industrial PP |
Inner Jacket | Delrin | |
Threading | SS 304/Brass/lndustrial Plastic | |
Sizes | Suitable for pipe dia. | h" (15mm) |
Pressure rating | 16 kg/cm2 | |
Colour | Blue/Black |
Migration test as per IS standards- IS 9833:1997 with reference to IS 10910:2003
for Raw material Polypropylene and its co-polymer is safe to use in contact with foodstuff, pharmaceuticals and drinking water. Tested and certified by international certifying agencies (NABL Accredited).
BS 6920 WRAS Certified: Suitability of non- metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water.
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body | Composite material (Polypropylene) |
Threading | SS 304 / Brass | |
Seal | EPDM / Nitrile | |
Other hardware | SS 304 / Galvanized MS | |
Sizes | Outlet | ½, ¾, 1 inch |
Suitable for pipe dia | 63mm to 160 mm | |
Pressure rating | 16 kg/cm2 | |
Colour | Blue/ Black | - |
Migration test as per IS standards IS 9833:2014, IS 9845:1998 with reference to IS 10910 for Raw material Polypropylene and its co-polymer is safe to use in contact with foodstuff, pharmaceuticals and drinking water. Tested and certified by international certifying agencies (NABL Accredited).
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body, Ball and Cap | Industrial Polypropylene |
Sizes | ½,3/4, 1 inch | |
colour | Blue/Black | |
Pressure rating | 16kg/cm2v |
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body | Industrial PP |
Inner Jacket | Insert | SS 304/Brass, Plastic |
Sizes | Suitable for pipe dia. | h" (20 mm) to 1" (32 mm) & (25mm) |
Pressure rating | 16 kg/cm2 | |
Colour | Blue/Black |
Migration test as per IS standards- IS 9833:1997 with reference to IS 10910:2003 for Raw material Polypropylene and its co-polymer is safe to use in contact with foodstuff, pharmaceuticals and drinking water. Tested and certified bv international certifying agencies (NABL Accredited).
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body | HDPE 80/HDPE 100. |
Terminal Pins | Brass | |
Sizes | Suitable For pipe dia | 20mm to 160mm |
Pressure rating | 16 kg/cm2 | |
colour | Black/Yellow |
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body/Lid | Industrial PP with UV resistant high impact pigment fibre polymer |
Sizes | Top ID x Bottom ID x Height | ø200mm x ø275mm x ø 265mm |
Suitable for pipe dia. | 20mm, 25mm, 32mm | |
Dead load testing | 100kg | |
colour | Body and Cover | Blue/Black/Green |
Technical Details
Features | Parts | Specifications |
---|---|---|
MOC | Main Body | ss 316/SS 304/SS 202 |
Sizes | Outlet | h" (15 mm), %" (20 mm) & 1" (25 mm)" |
LPM | 5, 10 & 15 LPM (Customization possible) | |
Variants | Inlet - Outlet | Male - Male, Male - Female, Female - Female |