Drilling Bits, Chucks & Collets

Our product range contains a wide range of Geared Pillar Drill, Hydraulic Hacksaw Machine and Hacksaw Machine

Geared Pillar Drill

Standard Accessories :
Suitable Electric Motor 3 Phase with Switch & Wiring, Motor Pulley, V-Belt, Drill Chuck & Arbour.

Extra Accessories :
Drilling Vice, Machine Lamp, Motorised Coolant System with Assembly, Tapping Attachment.

SPECIFICATIONS

MODEL	AMI - 25	AMI - 32	AMI - 38
Drilling Capacity in Steel	25	32	38
Spindle Centre to Column	206	254	325
Max. Travel Spindle	133	152	--
Max. Dist. Spindle Nose to Table	710	810	685
Max. Dist. Spindle Nose to Base	950	1120	1065
Diameter of Table	336	381	545
Base Area (Machined)	304 x 330	710 x 445	450 x 600
Column Diameter	90	108	130
Total Height of the Machine	1606	1778	1814
No. of Spindle Speeds	--------------4 direct & 4 Geared--------------
Spindle Nose Bore	MT-3	MT-3	MT-4
Spindle Speed with 1440 RPM Motor	--------------82 to 2425--------------
Electric Motor	1 HP	1.5 HP	2 HP
Gross Weight	310 Kgs.	650 Kgs.	940 Kgs.
Net Weight	180 Kgs.	250 Kgs.	550 Kgs.
Wooden Case Dimensions	1850 x 700 x 520	2250 x 850 x 650	2450 x 1000 x 800

View Complete Details

Ask Latest Price & Details

Hydraulic Hacksaw Machine

SAW FRAME :This of regid construction & runs in prismatic guide ensuring a parallel cut. This cut takes place on the draw stroke & the hydraulically liften out of contact with the workpiece on the forward stroke to prevent wear or the blade & can out metals of all kinds & strength.

FEED:Two levers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to be raised or forwarded hydraulically bow raised automatically & motor Switched off on completion of the cut.

BED:The bed is of large proportion provided with guide ways for the vice for clamping the material vice is of rigid constructional. One jaw remains fixed & the other can be adjusted according the material to be cut.

ELECTRICAL EQUIPMENT :A direct on line push bottom starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as the blade is clear from the work non productive time is reduced to minimum.

DRIVE :Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed.

SPEED :The incorporation of two-speed driving mechanism allows for the most suitable speed to selected for material being cut.

COOLANT :The Coolant tank is totally enclosed in the machine base & a Speed Pump supplies coolant to the saw blade through a stay put pipe & top.

SPECIFICATIONS

Size	7"	8"	10"	12"	14"	16"	18"	20"	24"
Stroke (adjustable)	5.5"	5.5"	5.5"	5.5"	5.5"	5.5"	5.5"	5.5"	5.5"
No. of Stroke per min.	100 to 120	100 to 120	85 to 100	85 to 100 75 to 85	75 to 85	60 to 85	60 to 85	60 to 85
Electric Motor Required	1 H.P.	1 H.P.	1.5 H.P.	2 H.P.	2 H.P.	3 H.P.	5 H.P.	7.5 H.P.	7.5 H.P.
R.P.M.	1440	1440	1440	1440	1440	1440	960	960	960
Blade Size	12" to 14"	14" to 16"	16" to 18'	18" to 20"	20" to 22"	22" to 24"	24" to 26"	28" to30"	30" to 32"
Capacity of Round Bar	7"	8"	10"	12"	14"	16"	18"	20"	24"
Capacity of Square Bar	5"	51/2"	8"	10"	11"	13"	14"	15"	18"
Weight (in Kgs.)	350	350	525	530	700	700	1000	1100	1200
Lenght	38"	38"	46"	50"	54"	58"	58"	66"	66"
Breadth	16"	16"	27"	27"	29"	29"	29"	30"	30"
Height	44"	44"	48"	54"	54"	60"	66"	72"	72"
Approx. Net Wt. (in Kgs)	400	400	550	600	700	800	850	900	900