Write a ReviewOur Products
Leading Manufacturer, Supplier & Retailer of Edge Folding Machine, Universal Sheet Folding Machines, Trunk Folding Machine, Automatic Paper Pin Making Machine and Folding Machine.
Roll type edge folding machines for edging the tin plate body blanks so form hooks for side seams prior to body forming or simple flanging with moderately sharp bends, complete with an adjustable gauge. |
| SPECIFICATIONS | |||||||||||||||||||||
|
Universal Combination bending brakes represent a modern departure from the old conventional hand brake design. They are not limited to straight bending and box and pan work alone, but will accommodate inside bending, radius forming many other intricate forming operations with special attachments. They are limited in versatility only by the operators ingenuity.
These brakes will from a 1 flange over the entire length in their rated capacity.
Heavy duty springs reduce clamping effort and adjustable counterweights reduce bending effort.
The upper beam may be moved directly to the read either 6 or8 inches to accommodate box fingers and special forming attachments. The normal maximum opening between the upper beam and the lower beam is 1.3/4 and may be increased to 4 to accept box and pan fingers.
When the apron angle iron work support is removed, brake capacity is reduced by 2 guages.
When the apron angle iron work support and apron filler plates are removed, brake capacity is reduced by 4 guages. When both are removed, reverse bends may be made except on 8 foot and 10 foot, 12 foot guage brakes only 3/8 reverse bends may be made. When bending stainless steel brake capacity is reduced 4 guages for both straight and finger bending.
Heavy duty hand operated trunk folding machines specially suitable to form heavy and large right angle and curved folds on the sides of the trunks and also suitable for folding the sides of trays and various other similar articles with help of suitable dies, operation through the bed by eccentric shaft raising and lowering the top beam, top beam has adjustment for height, complete with one M.S. bending die for 90 (square) bends, a set of gauges and bench mounting stand. |
| SPECIFICATIONS | ||||||||||||||||||
|
CMT type folding machines are designad for easy and accurate clamping full length-wise bending and forming sheets to required angle correctly, angle bending stop has been fitted for correct repeatation jobs. |
| SPECIFICATIONS | ||||||||||||
|
Hema Lshah(Ami Machine Tools)
20, Ambalal Doshi Marg, (Hammam St.), Fort, Mumbai-400001,, Maharashtra, India
Share us via 
