Write a Review
Our Product / Services
We offer the best product range of Biochemistry Analyzer Autochem, Biochemistry Analyser Automatic and Bio Chemistry Analyzer.
Labtech Biochemistry Analyzer for routine chemistry , enzymes & drug levels . It has a user friendly on board software . It is very economical , reliable high precision machine.
Featues:
| Measuring System | Photometric |
| Linear Measurement Range | 0.000 to 3.0000 AbsorbtionUnits (A) |
| Photometric Accuracy | ±2% or 0.007 whichever is higher.from 0 to 1.5 A , ±3% from 1.5A to 3.0A |
| Drift | <0.007 A/hr |
| Photometric Linearity | 2.2A |
| Optical Measurement | Photodiode |
| Filers: | |
| Type | Interference Filter |
| Wavelength | 340,405,510,546, 578 & 630 nm & Two Optional |
| Half Bandwidth | 10 nm ± 2nm |
| Selection | Automatic by Stepper Motor |
| Cuvette Volume | 500 µl |
| Temperature of Cuvette Block | 370C, Peltier Controlled |
| Light Source | xenon gas filled / Tungsten Halogen |
| Warm upTime | 90 Sec |
| Display | Four Line LCD , backlit , 16 characters |
| Printer Interface | Optional Parallel Report |
| Memory | 8 KB Non-Volatile RAM , Battery back up supports 40 open tests |
| Analysis Mode | Absorbance : Fixed Time |
| End Point : Kinetic | |
| Multi -Standard :Differential | |
| Ratio : PTT | |
| Concentration Calculation | By factor or By Standard |
| RS232 Serial Port | 2400 baud , 1 start , 8 data , 1 stop ,no parity bits |
| Power | Wattage: 50 watts |
| Voltage : 115-230 Volts ± 10% , 50/60 HZ | |
| Operating Positions | on horizontal flat , rigid & vibration Free space |
| Operating Conditions | Temperature: From + 18oC to 35oC |
| Relative Humidity: up to 85% | |
| Storage Conditions | Temperature: From -10oC to 60oC |
| Relative Humidity: up to 85% | |
| Enclosures | Abs Fire Retardant |
| Size (cms) | 30 x 38 x 13.5 (lxbxh) |
| Weight | 5 Kgs. |
| Labtech Autochem plus is a touch screen based Auto Biochemistry analyzer with built in peristaltic pump and flow cell, Touch activated graphic display makes it very convenient and user friendly stand alone system for all routine chemistries, enzymes, hormones and durg test. Its advanced unique design of photometer and peristalatic pump assembly ensures long life and high precision. | |
| Features: | |
|
| Human Machine Interface: | TOUCH PANEL / KEYpad | ||||||||||||
| Linear measurement range: | 0.000 to 3.000 Absorbance Units(A) | ||||||||||||
| Photometric Accuracy: | ±2% or 0.007 whichever is higher,from 0 to 1.5 A, ±3% from 1.5A to 3.0A | ||||||||||||
| Drift: | 0.007A/hr. | ||||||||||||
| Photometric Linearity | 2.2A | ||||||||||||
| Optical measurement | Photodiode | ||||||||||||
| Filters: |
|
||||||||||||
| Flow cell: |
|
||||||||||||
| Cuvette Volume: | 500µ| | ||||||||||||
| Dry Block incubator: |
|
||||||||||||
| Temperature of Cuvette / flow cell Block: |
|
||||||||||||
| Light Source: | Xenon Gas filled/ Tungsten Halogen | ||||||||||||
| Warm up time : | 90 sec. | ||||||||||||
| Display : | 5*Graphics LCD,Negative Blue, STN | ||||||||||||
| Printer: | Built in thermal printer | ||||||||||||
| Memory: | 64 KB-Non volatile RAM with battery backup | ||||||||||||
| Storage Capacity : | 250 open tests , with 30 QS results/test (Normal and abnormal controls) and 2000 Patient results with patient ID | ||||||||||||
| Analysis Mode: | Absorbance | ||||||||||||
| End Point | |||||||||||||
| Fixed Time | |||||||||||||
| Kinetic | |||||||||||||
| Differential | |||||||||||||
| Ratio | |||||||||||||
| Concentration Calculation: | By factor or by Standard | ||||||||||||
| RS232 serial port: | 9600 baud, 1 start, 8 data,1 stop,no parity bits | ||||||||||||
| Power |
|
||||||||||||
| Operating Position: | On horizontal,flat, rigid and vibration free surface | ||||||||||||
| Operating conditions: |
|
||||||||||||
| Storage condition: |
|
||||||||||||
| Enclosure : | ABS Fire retardant | ||||||||||||
| Size (cm) : | 30x38x13.5x(lxbxh) | ||||||||||||
| Weigth: | 5.5 Kgs.(Approx) |
| Complete Lab : | |
| |
| Efficient Power House : | |
|
| Measuring System : | Photometric |
| Linear Measurement Range: | 0.000 to 3.000 Absorbance unit (A) |
| Type of filter : | Interference Filiter |
| Test Tube volume : | 500µl |
| Temperature of cuvette block : | 37°C, Peltier controlled |
| Display : | four line LCD, back lit, 16 characters |
| Concentration calculation : | By factor or by standard |
| Incubator : | Built-in 37°C, 15 test tubes |
Ankit Jain (Ankit Scientific Industries)
No. 5368/ C, Punjabi Mohalla, Near Congress Bhawan, Ambala, Haryana - 133001, India
Share us via
