Vices #3866410

Features :

• Use these Vices on your Drilling machines for cutting Key-ways, doing light jobs, making milling attachment for your lathe, making cross-sides for your wood lathes and numerous other uses. Vice fits on any Drilling Machine.

Finish : Amazon Green Specifications :

Heavy Duty Bench Vice Deluxe ( Double Rib ) Swivel Base

Features :

• Hobbyist Vice for application that involve working in confined spaces.
• With Swivel Base.

Finish : Metallic Silver & Steel Grey

eatures :

• The Vice can either be gripped in one hand or held between the jaws of a larger Vice thus allowing better access to the work peice. The jaws are tightened by means of a large wing nut.

Application :

• These vices are best suited for working on small jobs.

Construction :

• Manufactured from S.G. Ductile Iron.The steel main screw is plated which prevents corrosion.

Application : Metallic silver.

Features :

• If the main feature of the hinged vice is speed ofoperation, the feature which distinguishes the chain vice is very powerful grip.The Pipe rests on a "V" formed by the two sets of forged heat treated steel jaws.
• The High tensile steel chain is then looped over the pipe, locked into a slot between the jaws and tensioned by a handle and screw; a strong rigid three-point location which renders the pipe mmovable.
• Compact and easy to store away.

Construction :

• Body SG ductile Iron.

Application : Metallic Silver

Features :
Code 724

• Centering Vices are constructed to hold bars and tubes in firm concentric grip. They feature 4 point clamping contact so work pieces are held securely without hard clamping which can result in damage to delicate parts.
• The Vice is precisely manufactured of highest quality material , has an accuracy of parallelism of .006" per ft.

Construction :

• Close Grey Iron dully stress relieved body.
• The supporting tool steel V - Block is hardened and ground and is reversible to accommodate a wide range of diameters.

Finish : Amazon Green.

Features :

• All the sides of Body are Ground. Perfectly parallel and square to ensure complete alignment of Jaws. They can be used horizontal, Vertical and longitudinal positions.

Construction :

• Body side Base, cast iron of selected quality, Main Screw Handle and side plates, High quality steel.

Finish : Hammer tone mid grey.

Features :

• Manufactured to consistent accuracy to give prolonged reliable service.
• Bearing Surface Precision ground. Flatness within 0.0012" (30 microns)
• Once locked impossible to shift.
• Totally enclosed acme screw with three point location of operating in Manganese Bronze Nut.
• Tenon Slot machined in back as standard for CNC use.
• Swivel base graduated through 360
• Vertical Tilting Capacity 90

Application :

• Suitable for Milling - Grinding - Shaping- Drilling and Jig Boring.

Construction :

• These Vices are manufactured from close grained Hi Tensile seasoned Cast Iron.
• Jaws : Fully hardened (503 HRC) and ground tool steel jaws with parallelism within 0.0012" (30 microns)
• Spindle : Precisely cut ACME threads with pitch most suitable for firm gripping and smooth operations.
• Nut : Hot stamped manganese bronze nut contained in totally enclosed sliding jaws.
• Fasteners : All fasteners used in the vices are grade 10.8 which provide extended strength and rigidity to these vices
• Supplied Complete with Steel Handle.

Finish : Amazon Green

• Code SG701 : SG Ductile Iron Body

Finish : Hammer tone metallic blue

Features :

• APEX 3 Way Universal Tilt & Swivel Angle Vice can tilt +45 and Circle 360, and has all the built strength and rigidity associated with APEX Vices.

3 Way Universal Tilt&Swivel Angle Vice.

Features :

• (Dovetailed Slide) Vee sideways adjustable for giving prolonged working life.
• Manufactured to consistent accuracy to give prolonged reliable service.
• Bearing Surface Precision ground. Flatness within 0.0012" (30 microns)
• Once locked impossible to shift.
• Totally enclosed acme screw with three point location of operating in Manganese Bronze Nut.
• Tenon Slot machined in back as standard for CNC use.
• Swivel base graduated through 360
• Vertical Tilting Capacity 90

Finish : Hammer tone Ash grey.


SG749 : SG Ductile Iron Body Finish : Hammer tone metallic blue.

Preci Tilting & Swiveling Vice.

SG701A : Universal Precision Machine ViceSG720 : Precision Machine Vice (Swivel Base)

• he most versatile of all machine vices with all degrees of freedom, the Universal Vice allows the work piece to be set at any desired angle.
• The specific advantage of this Vice is its ability to be set perpendicular to the base, thereby allowing right angle machining on the same machine setting.
• Allows for the job to be set at low heights, particularly suitable for the most complicated grinding applications.
• Fully graduated 360 swivel base allows complete rotation along the vertical axis. The third angular side with a moving axis allows for any setting in the 3D plane.
• Sliding jaw runs on accurately ground surfaces fitted with hardened steel keep strips ensuring perfect alignment and rigidity.
• All swivelling movements have positive locking.
• "Hold Down" slots allow for secure clamping of the vice on the work table.

Application :

• Primarily designed for use on Surface, Universal and Tool and cutter Grinding Machines. Its sleek and slender design has endeared it to many engineers who look for precision and versatility.

Construction :

• S.G.Ductile Iron Frame
• Jaw plates are hardened steel with accurately ground surface.
• Use of hi tensile grade 10.8 fasteners provides strength and rigidity to these vices.
• Supplied complete with steel handle.
• Supplied Complete with Steel Handle.

SG720

: S.G. Ductile Iron Frame

Finish : Hammer tone metallic blue.

Precision Milling Machine Vice(748 - Swivel Model)(748P - Plain Model)

Features :

• Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base.
• You can hold piece parts in the most immobile state possible.
  
  

Three Basics in precision Clamping

1. That the movable jaw does not lift off the bed.
2. That the body is rigid, and that a minimal amount of bending stresses are created in the clamping area.
3. That deflection of the stationary jaw is minimized.

• Totally enclosed toughened Screw.
• The bed is guaranteed flat and parallel .0001 per inch.

Construction :

• Graded Cast Iron dully stress relieved body. Tool steel hardened & ground Jaws.
• In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
• 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.

Milling Machine Vice (Deluxe) Model 745 : (Swivel Model) 745P : (Plain Model)

702 : Shaper Vice (Swivel Model)702P : Shaper Vice (Plain Model)

Features :

• Designed to permit maximum opening of Jaws. 360 swivel base indexed.
  
  

Construction :

• High tensile Stress Relieved quality casting.
• High Tensile steel square thread screw with bronze nut.
• Hardened and precision ground high tensile serrated Jaws ensure firm grips on heavy cuts.

Features :

• The cylindrical section of the lower part of the loose Jaw swivels allowing tapered or irregular work to be held rigidly.
• Jaws Plates Automatically pull work down.
• The positions of the loose Jaw is instantly adjustable to the full capacity of the vice.
• Jaw plate is serrated to give extra gripping power.
• Work can also be cut or drilled below the bottom of the jaw. This can not be done in the ordinary vice without injuring screw.
• Supplied complete with tommy bar.

Finish : Amazon Green.

Features :

• For Holding components at any angle between 0 to 60 degrees.
• Rapid setting with protractor scale (0 -60)
• Angle rigidly held with single strap clamp.

Construction :

• Body side Base, cast iron of selected quality, Main Screw Handle and side plates, High quality steel.

Finish : Hammer tone mid grey.

Features :

• Moving jaw is plain & fixed is provided with one vertical & two horizontal 90 V-grooves. Horizontal and vertical V-groove in the stationary jaw allows holding of round job securely.
• The base and slides are precision ground for stability and accurate operation.
• Continuous Screw giving powerful grip on work.

Construction :

• Body graded Cast Iron dully stress relieved. Lead Screw toughened selected steel. Precision ground hardened & tempered tool steel jaws

Features :

• The Ubiquitous Drill Vice is more than a fixture in any workshop. It is a necessity. These are specially designed for use by professionals who require a heavy Vice.
• This vice offers a ground vice bed for smooth & consistent jaw movement.

Construction :

• Manufactured from close grained cast iron.
• Jaws are hardened & ground.

Finish : Amazon Green
Code SG775 : SG Ductile Iron Body. Finish : Hammer Tone Metallic Blue

Features :

• Continuous Screw giving powerful grip on work.
• No lifting of the sliding jaw.
• Moving jaw is plain & fixed is provided with one vertical & one horizontal 90 V-grooves.

Construction :

• Closed grained C.I. body

Finish : Hammer tone mid grey.
Code SG713 : SG Ductile Iron Body Finish : Hammer tone metallic blue

• Small compact and indispensable Vices with steel jaws. On the face of which are grooved horizontal and vertical notches for holding, round, square, thin & irregular work for drilling & light milling.
• Vices are equipped with a convenient unigrip mechanism. Spindle moves inside the hollow hand grip allowing the vice to be used at a location away from table edge. This feature increase the scope of application of the range of vices.

Finish : Hammer tone mid grey.
Code SG710 : SG Ductile Iron Body Finish : Hammer tone metallic blue.

Features :

• Industry's favorite Mechanic's Bench Vices for 40 years had been made better. It's more of a "workhorse" than ever and here are solid reasons why
• Massive Anvil: More anvil area than before and the largest of any Mechanic's Vice in the market.
• Precision machine component & bearing surface for smooth operation and reliability.

Construction :

• Stressed Parts "Beefed - up" ! Areas of greatest stress have been strengthened with shock resisting C.I. casting for long dependable service.
• The large Diameter main screw fine pitched, square thread made of high grade steel.
• Long Forged Steel: Detachable and replaceable nut.
• Replaceable hardened steel serrated jaw plates guarantee a fast non-slip grip.

Tool Maker's Bench Vice ( Fixed Base

Machinist's Bench Vice IS - 2586-1986Size

Features :

• The quick release mechanism disengages the main screw allowing rapid movement of the slide.
• Conventional plain screw may be used when desired.
• Atime saving feature in repetitive work situations.
• Double rib slide High Quality fine pitched screw. Bronze nut for long life.

Application :

• Designed for fitting, filing and large assembly work, this vice is standard equipment for many industrial and training workshops.

Finish : Enameled smoke grey.

Features :

• Apex Pipe Vices are designed to endure the heavist pipe work fitted with long jaws, these vices will hold pipes firmly without any crushing or bending.
• The base is provided with three bolt holes to facilitate fastening to bench or post.
• Graranteed against defect in material or workmanship.

Construction :

• Frame & Jaws are made of shock resisting cast iron.
• Main screw is made of high grade steel.

Finish : Enameled oxford blue. SG 728 : SG Ductile Iron Body Finish : Hammer tone metallic Blue

Features :

• Accurately machined housing assure smooth sliding movement.
• Vice jaws equipped with a "TOE - IN" feature. When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of the work piece.
• Square body seating provides easy fitment under the bench top so that jaws are flush with the bench top.
• Body and sliding jaw have provision for attaching wooden liners to protect the vice, work piece and working tools.

Construction :

• These are manufactured from close-grained grey cast iron for long trouble free service.
• Accurately fitted solid steel guide rods reduce wear and tear giving the vices a smooth and true parallel action, free of side or cross deflection.
• The Steel main screw has buttress threads for smooth, accurate and responsive adjustment.

Finish : Enameled oxford blue.

Precision Hydraulic Machine Vice(782 - Swivel Model 782 P Plain Model ) size - 6"

Features :

• Manufactured to consistent accuracy to give prolonged reliable service
• Swivel base graduated though 360
• Tenon Slots in slide and swivel base
• Available as plain and swivel base.

Construction :

• High stress tensile stress Relieved quality casting, precision ground hardened and tempered steel jaws plate.
• ACME Thread interchangeable screw, Steel nut contained in totally enclosed sliding jaws.
• Complete with steel handle

Finish : SG773, SG773P- Amazon Green SG773, SG773P-SGDuctile Iron BodyHammer tone metallic Blue

Preci Self Centering Vice (Swivel Model)

Features :

• Fully graduated 360 swivel base allows the vice to be set at any angle along the vertical axis.

Finish : Amazon Green