GST : 06AAPCA9378P1ZL
Our Products
We are leaders in the market for providing best range of Carbon Coated TEM Grids 200 Mesh, Carbon Coated TEM Grids 300 Mesh, Carbon Coated TEM Grids 400 Mesh and RVC Carbon Foam
Carbon films on copper grids are thin and highly transparent to electrons, offering fine grain and low contrast that does not interfere with specimen structure.
Carbon support films can be applied to other grid sizes, material or type. Further details available on request.
Carbon films on copper grids are thin and highly transparent to electrons, offering fine grain and low contrast that does not interfere with specimen structure.
Carbon support films can be applied to other grid sizes, material or type. Further details available on request.
Carbon films on copper grids are thin and highly transparent to electrons, offering fine grain and low contrast that does not interfere with specimen structure.
Carbon support films can be applied to other grid sizes, material or type. Further details available on request.
Size : 50 x 50 mm, 60 x 60 mm, 100 x 100 mm, 150 x 150 mm 250 x 250 mm, 275 x 330 mm, 300 x 300 mm ( Other Sizes customization is also available, please inquire)
3% = relative density of panel (97% air void)
Why is Aritech® Reticulated Vitreous Carbon (RVC) foam so special?
Aritech® manufacture and distribute worldwide the different shape and size of RVC foam of unique and repeatability properties by a patented technology on affordable prices for research and industrial applications in various sectors. Aritech® RVC is a rigid, highly porous and permeable structure and has a controlled density of carbon per unit volume. The matrix of cells and ligaments is completely repeatable, regular, and uniform throughout the entirety of the material.
Applications :
Vitreous or Glassy carbon is a form of pure carbon produced by the thermal decomposition of a three-dimensionally crosslinked polymer. It has a high flexural strength. The zero open porosity gives a low permeability to gases. Glassy carbon has excellent resistance to a wide range of aggressive chemical environments and can, therefore, be used as an alternative material to precious metals for laboratory equipment and, for example, for electrodes in polarography.
Vitreous Carbon Foam has an open pore structure and extremely high porosity, giving a high surface area and low resistance to fluid flow. It is chemically inert in non-oxidising environments over a wide temperature range, maintains strength at high temperatures and is thermally insulating yet electrically conducting. Applications include use as porous electrodes, thermal insulation, filtration, substrate support and acoustic control.
Unique Features :
Please enquire for other foams having different thicknesses, porosities and sizes.
If the item shown is not exactly what you require please let us know by sending us a message
Physical And Chemical Properties
| Compression Strength | 15-75 psi (0.10-0.52 MPa) |
|---|---|
| Tensile Strength | 25-50 psi (0.17-0.34 MPa) |
| Shear Strength | 4.4×103 psi (30.3 Mpa) |
| Mohs Hardness | 6-7 Mohs |
| Specific Heat | 0.3 BTU/lb °F (1.26 J/g °C) |
| Shear Modulus | 4.4 × 103 psi (30.3 MPa) |
| Modulus of Elasticity (Tension) | 14.6 × 103 psi (101.84 MPa) |
| Shear Modulus | 4.4 × 103 psi |
| Bulk Thermal Conductivity | 0.021 - 0.029 BTU/ft ·hr·°F (0.033 - 0.050 W/m °C) |
| Coefficient of Thermal Expansion | At (0-100°C) 1.2 × 10-6 in/in°F (2.2 × 10-6 m/m°C) At (100-1000°C) 1.8 × 10-6 in/in°F (3.2 × 10-6 m/m°C) |
| Bulk Resistivity | 12.7 × 10-2 ohm · in (32.3 × 10-2 ohm · cm) |
| Temperature In air | 600°F (315°C) |
| Limitations Inert environment | 6330°F (3499°C) |
| Pore Sizes | 0.040″, customization is also possible |
Ms. Pooja Chhabra (Aritech Chemazone Pvt. Ltd.)
Plot 890 ,Sector-7, Urban Estate, Kurukshetra, Haryana - 136118, India
https://www.metalspowders.com
Share us via
