Write a Review
Our Products
Our product range contains a wide range of Motorised Guillotine Shears, AUTOMATIC COLD THREADING MACHINE, BOLT HEAD TRIMMING AND SHANK REDUCING MACHINE, Billet Shearing Machine and Pipe Threading Machine
| automatic cold threading machineasian auotmatic cold thread rolling machine type pictr are suitable for threading screws, bolts, cycle and automibile parts and similar components from mild steel brass, and aluminium etc. Two flat dies are used in these machines and all adjustments are very simple. A coolant pump keeps the die cool. pictr no. Length of bolts dia of bolts production/minmotor h.p & r. P.m1 3/8" - 2" 3/16"-1/4" 90-100 5 x 960 1/2 x 14402 3/4" - 3" 1/4" -3/8" 70-80 10 x 960 1 x 14403 1" - 4" 5/16-1/2" 60-70 20 x 960 1 x 14404 2" - 5" 3/8"-5/8" 50-60 20 x 960 1 x 14405 3" - 6" 1/2"-3/4" 40-50 20 x 960 1 x 1440 |
Cat. No. : SSM-030BOLT HEAD TRIMMING AND SHANK REDUCING MACHINEAsian Automatic Bolt Head Trimmming & Shank Reducing machine Type PICT are of very robust construction, simple in operation, improved in design and very easy to handle. Suitable for H.T or M.S. Bolt Blanks.
PICT NO. Length Of Bolts Dia. Of Bolts Production/MinMotor H.P. & R.P.M1. 3/8" -2" 3/16"-1/4" 90-100 5 X 9601/2 X 14402. 3/4"-3" 1/4"-3/8" 70-80 10 X 9603/4 X 14403. 1"-4" 5/16" -1/2" 60-70 20 X 9601 X 14404. 2"-5" 3/8"-5/8" 50-60 20 X 9601 X 14405. 3"-6" 1/2"-3/4" 40-50 20 X 9601 X 1440
Cat. No. : WM-009Billet Shearing Machine
Technical Specifications:- All the drive gears are manufactured out of forged En-9/19/24 Steel which is duly hardened and grounded- The shaft / Crank is forged En - 8/9 steel- All the Bearings are of best quality- Gun Metal Bushes are made with Copper Alloys to last a longer life
Salient Features:- Capacities of this billet shearing machine is upto 6" Sq.Billets & 10x6" Slabs- have production capacity of upto 200 tons daily- All the machines are tested here for capacity and performance before dispatch- These machines are fabricated from tested rolled plates from main producers, which are mild in composition, but sturdy in performance.
Cat. No. : WM-34PIPE THREADING MACHINESPECIFICATIONS (PIPE THREADING MACHINES)
Threading capacity 1/2" to 11/2" 1/2" to 21/2"1" to 4"21/2" to 6"
Movement of Saddle 5" 7"10"10"
No. of speeds 2 332
Spindle RPM 90 & 120 60, 90 & 12040, 75 & 11527 & 50
Power Recommended 3 HP 7.5 HP10 HP15 HP
Cat. No. : WM-008
Cat. No. : JM-0115" Floor Model Combined Rolling MillThis is a 5 inch roll length combined sheet & wire rolling mill. The rolls are made of high chromium special steel, hardened and ground finished. They are housed in extremely strong frame to overcome all the vibrations and stresses developed during working. The rolls are running in special anti friction phosphor bronze alloy. The gears are made of case hardened steel and immersed in oil for noiseless and smooth operation. Various components are standardised and are interchangeable. This assures easy maintenance.
Cat. No. : JM-0115" Floor Model Combined Rolling MillThis is a 5 inch roll length combined sheet & wire rolling mill. The rolls are made of high chromium special steel, hardened and ground finished. They are housed in extremely strong frame to overcome all the vibrations and stresses developed during working. The rolls are running in special anti friction phosphor bronze alloy. The gears are made of case hardened steel and immersed in oil for noiseless and smooth operation. Various components are standardised and are interchangeable. This assures easy maintenance.
Cat. No. : JM-063" MINI ROLLING MILLThis is a lightweight portable mill, which can also be fitted with bangle design roll. It has been redesigned to facilitate working by removing the front support bars in front of rolls and taking the same underneath in the base.
Cat. No. : JM-063" MINI ROLLING MILLThis is a lightweight portable mill, which can also be fitted with bangle design roll. It has been redesigned to facilitate working by removing the front support bars in front of rolls and taking the same underneath in the base
Cat. No. : JM-0126" Bench Double Geared Rolling MillThis is a 6" x 3" roll size bench rolling mill with heavy duty roll housing and bigger gears. It is provided with EXTRA gears to provide HIGHER ROLL OPENING i.e. it allows thicker plates to be rolled due to higher roll opening as a result of extra gears. Also this model is provided with TWO big size roll driving gears instead of only ONE as in other Bench model rolling mills.
| Cat. No. : JM-0126" Bench Double Geared Rolling MillThis is a 6" x 3" roll size bench rolling mill with heavy duty roll housing and bigger gears. It is provided with EXTRA gears to provide HIGHER ROLL OPENING i.e. it allows thicker plates to be rolled due to higher roll opening as a result of extra gears. Also this model is provided with TWO big size roll driving gears instead of only ONE as in other Bench model rolling mills. |
Cat. No. : SMM-02FOOT OPERATED SHEARING MACHINEFoot Operated Shearing Machines and Treadle Shearing Machines are essential in sheet metal industries as they have an edge amongst others on the basis of adaptable design, stiff construction, and appearance. Such machines are specially designed for quick and incessant cutting of steel sheets of varied widths and trimming them in unlimited lengths. They come with some vital features and comprise high tensile springs for quick return of treadle. They comprise four cutting edged hardened and ground quality blades. With spring loaded sheet holding device, they are delight to have and they also contain all steel fabricated construction body.
Model 1.Maximum Width in Inches :- 12"Maximum Guage :- 20 S.W.G
Model 2.Maximum Width in Inches :- 18"Maximum Guage :- 20 S.W.G
Model 3.Maximum Width in Inches :- 24"Maximum Guage :- 20 S.W.G
Model 4.Maximum Width in Inches :- 36"Maximum Guage :- 20 S.W.G
Model 5.Maximum Width in Inches :- 40"Maximum Guage :- 20 S.W.G
Model 6.Maximum Width in Inches :- 48" (Heavy Duty)Maximum Guage :- 16 S.W.G
Model 7.Maximum Width in Inches :- 60"Maximum Guage :- 20 S.W.G
Model 8.Maximum Width in Inches :- 78"Maximum Guage :- 20 S.W.G
Cat. No. : JM-074" Bench Combined Rolling MillThis bench model rolling mill is provided with lever system so that either sheet rolls or the wire rolls can be used at any one time with provision to fit side rolls. This machine is also available with a specially designed steel fabricated stand with 1.0 HP 220 volts single phase Cast Iron body TEFC AC electric motor, R/F switch and V belt. The R/F switch is provided complete with wiring to allow both reverse and forward operation.
Cat. No. : JM-074" Bench Combined Rolling MillThis bench model rolling mill is provided with lever system so that either sheet rolls or the wire rolls can be used at any one time with provision to fit side rolls. This machine is also available with a specially designed steel fabricated stand with 1.0 HP 220 volts single phase Cast Iron body TEFC AC electric motor, R/F switch and V belt. The R/F switch is provided complete with wiring to allow both reverse and forward operation.
Cat. No. : JM-093" Motorised Design Rolling MillThis is a 3" roll length rolling mill designed with provision to change the rolls easily and quickly. This makes it ideal for use in design rolling work where you may want to use more than one design roll frequently. The machine is fitted with gear box and the main roll housing frame is made from solid steel for long trouble free life. Its supplied with 1.0 HP 220 volts single phase AC electric motor and conveniently located R/F switch for both forward and reverse operation.
Cat. No. : JM-093" Motorised Design Rolling MillThis is a 3" roll length rolling mill designed with provision to change the rolls easily and quickly. This makes it ideal for use in design rolling work where you may want to use more than one design roll frequently. The machine is fitted with gear box and the main roll housing frame is made from solid steel for long trouble free life. Its supplied with 1.0 HP 220 volts single phase AC electric motor and conveniently located R/F switch for both forward and reverse operation.
Cat. No. : JM-085" Bench Single Roll Rolling MillThis is a bench rolling mill with roll size of 5" x 2.1/2" and is available in three models. It is available with either the sheet rolls, or wire rolls or can be supplied with combined sheet and wire grooves in one single roll. Similar rolling mill is also available with roll size of 4" x 2.1/4" and 6" x 3" in the three different versions as for the 5" size rolling mill. Specially designed 6" x 3" roll size bench rolling mill is also available with higher roll opening for thicker sheet work
Cat. No. : JM-085" Bench Single Roll Rolling MillThis is a bench rolling mill with roll size of 5" x 2.1/2" and is available in three models. It is available with either the sheet rolls, or wire rolls or can be supplied with combined sheet and wire grooves in one single roll. Similar rolling mill is also available with roll size of 4" x 2.1/4" and 6" x 3" in the three different versions as for the 5" size rolling mill. Specially designed 6" x 3" roll size bench rolling mill is also available with higher roll opening for thicker sheet work
Cat. No. : JM-0105" Motorised Single Roll Rolling MillThis is a 5" roll length combined sheet and wire rolling mill with provision to mount side grooving rolls. The rollers are housed in strong solid steel housing. The machine is fitted with oil gear box system and supplied with heavy duty 1.0 HP 220 volts single phase AC electric motor and R/F switch for both forward and reverse operation.
Cat. No. : JM-0105" Motorised Single Roll Rolling MillThis is a 5" roll length combined sheet and wire rolling mill with provision to mount side grooving rolls. The rollers are housed in strong solid steel housing. The machine is fitted with oil gear box system and supplied with heavy duty 1.0 HP 220 volts single phase AC electric motor and R/F switch for both forward and reverse operation.
Paritosh Gulati (Asian Power Cyclopes)
Rochipura, Majra, Dehradun - 248171Rochipura, Majra, Dehradun, Uttarakhand, India
Share us via
