Write a Review
Our Products
Our product range contains a wide range of 4 AXIS CNC PLANO MILLER and Heavy Duty Plano Miller
Cat. No. : WM-0174 AXIS CNC PLANO MILLERA four axis CNC Plano Miller, basically a vertical Ram Head Type Plano Miller. This machine is fitted with a Spanish make Fagor CNC Control, Fagor electronic hand wheel, spindle invertor, spindle encoder, and US make valve balls screw. Spindle taper is ISO-50 or ISO-40 as per design requirement. X, Y, Z, W axis movements are through AC servo motors.
The machine is designed to take up the maximum load and made of cast iron with flat guide ways, protected with telescope type metallic cover.
With the combination of main spindle and side attachments, five faces of a component can be machined in one set-up. Various operations like Milling, Drilling, Boring and Tapping can be performed in this versatile machine.
AUTOMATIC TOOL CHANGER OPTIONAL.SPECIFICATIONSLength of stroke (in mm) 1200 1800 2400 3000 3600Width between columns 1000 1200 1350 1500 1800
. TABLEWorking Length As per stroke length orderedNo. of T-Slots 5 5 5 6 6Width of T-Slots (in mm) 19 19 19 19 19
. MILLING HEADSNo. of Milling Heads One to four as per orderHorizontal Traverse (in mm) 900 1100 1250 1400 1700Swivel of Milling Head to either side (in degrees) 60 60 60 60 60
. CROSS RAILVertical Traverse 750 950 1150 1350 1550
. TABLE SPEEDSVariable from 30 mm to 500 mm per minute
. MILLING HEADS GENERAL HEAVY DUTY EXTRA HEAVY DUTYRange of Speeds RPM 30 to 400 30 to 300 As per orderMotor Variable Speed S-V 3 HP x 3 Phase 5 HP x 3 Phase -do-Spindle nose Dia. MM 85 125 -do-Quil Movement MM 70 100 -do-Micro Feed Manual 0.1 MM 0.1 MM -do-Cutter Dia. MM 100 MM 150 MM -do-Spindle Nose Taper 150 / 40 150 / 50 -do-Extra Heavy Duty Milling Head with 7.5 / 20 HP on order
Cat. No. : WM-018HEAVY DUTY PLANO MILLERFOR BETTER ACCURACY, FINISH AND PRODUCTIVITY, AVALIABLE IN THREE MODLES
(a) PLANO MILLER GEAR TYPE(b) PLANO MILLER BELT TYPE(c) PLANO MILLER ELECTRO MAGNETIC DRIVE TYPE
SPECIFICATIONSL in the Model indicates any length of stroke required between 6' to 40'Width between columns L 3ft. L 4ft. L 4.5ft. L 5ft. L 5.5ft. L 6ft. L 7ft.Length of Stroke in feet 6 ft. to 40 ft. as per order / requirementLength of Stroke in Meters 1.8m to 12m as per order / requirement
. CAPACITYWidth between colums 900 1220 1372 1524 1676 1828 2133Height under Cross Rail 900 2300 1372 1524 1676 1828 2133
. TABLEWorking Surface Length EQUAL TO LENGTH OF STROKE LNo. of T-Slots 5 5 5 6 6 6 7Width of T-Slots 19 19 19 19 19 19 19Distance between T-Slots 127 127 148 148 148 190 190
. MILLING HEADSNo. of Milling Heads ONE, TWO OR THREE AS PER ORDERHorizontal Traverse of Milling Head on Cross Rail 760 900 950 1200 1350 1500 1760Max. swivel of Milling Head to either side 50 60 60 60 60 60 60
. CROSS RAILVertical Traverse of Cross rail mm (elevating) 750 1200 1330 1500 1650 1800 2060Elevating Traverse of side Milling Head 600 850 100 1150 1300 1400 1750. MILLING HEADS GENERAL DUTY OR HEAVY DUTY as per order No. of speeds 6 6Range of speeds in RPM 55, 80, 100, 130, 170, 260 50 to 270 rpmMotor 3 phase 440 volts 3 HP/1440 RPM 5 HP/1440 RPMSpindle dia at Nose 85mm 125mmVertical traverse of quill 70mm 100MMVertical Traverse operation Hand operated Hand operatedMicro Feed Hand operated 1 small division = 0.1 mm Onesmall Division = 0.1mmFeed of Trolly for Milling 32mm to 100mm per minute 32mm to 100mm per minuteCutter Dia 80mm to 10mm 120mm to 150mmSpindle Nose Taper ISO-40 ISO-50Holding of cutter By Draw Bolt Either by draw bolt / bar or bolts on spindle noseExtra heavy duty milling head with 7.5 / 10 HP also available on request
Paritosh Gulati (Asian Power Cyclopes)
Rochipura, Majra, Dehradun - 248171Rochipura, Majra, Dehradun, Uttarakhand, India
Share us via
