Post Buy Requirement
AC
MUMBAI, Maharashtra, India
Add Review

Light Fitting #207431

Flameproof Fluorescent Light Fittings

Two enclosure types separately for 42W and 68W compact energy-saving lamps, with good performance including rapid starting, ash free, high lighting efficiency, long service life and energy saving, etc, The luminous intensity of a 42W compact energy-saving lamp equals an 80W mercury lamp; the luminous intensity of a 68W compact energy-saving lamp equals an 125W mercury lamp.
View Complete Details

EMERGENCY EXIT LIGHT FITTINGS


  • Explosion protection to
    -CENELEC
    -lEC
    -NEC

  • Can be used in
    Zone 1 and Zone 2
    Zone 21 and Zone 22
    Class I, Zone 1 and Zone 2
    Class I, Division 1, Groups C, D

  • Lighting both in normal condition and emergency condition; When the power supply is cut off, the light illuminates; provided with overcharge, over-discharge and short circuit protection.

  • Designed with test button and sleep button. Press the test button and the lamp will enter emergency mode. The sleep button turns off the lamp, re-press the button and the lamp turns on and returns to operating status.

  • Ultra-bright LED lamp, low power consumption and long service life up to 50, 000 hours; energy saving and environmentally friendly.

  • Enclosure in copper-free aluminium, powder coated surface, yellow (RAL 1021).

  • Toughened glass resistant to temperature changes.

View Complete Details

EXPLOSION-PROOF ANNULAR LIGHT FITTINGS


  • Explosion protection to
    -CENELEC
    -lEC
    -NEC

  • Can be used in
    Zone 1 and Zone 2
    Zone 21 and Zone 22
    Class I, Zone 1 and Zone 2
    Class I, Division 1, Groups C, D

  • Power: 21W x1, 21W x 2.

  • Enclosure in copper-free aluminium, powder coated surface: yellow (RAL1021)

  • Powder coated wire guard: white.

  • Toughened glass cover resistant to temperature changes.

View Complete Details

EXPLOSION-PROOF LUSTRATION LIGHT FITTINGS FOR FLUORESCENT LAMPS


  • Explosion protection to
    -CENELEC
    -IEC
    -NEC

  • Can be used in
    Zone 1 and Zone 2
    Zone 21 and Zone 22
    Class I, Zone 1 and Zone 2
    Class I, Division 2, Groups A, B, C, D

  • Two protection type: Ex e q and Ex nA; Two enclosure types for Ex e q, six enclosure types for Ex nA.

  • No Ex e q protection for LED light fittings

  • Toughened glass transparent cover, high light transmittance, resistance to high energy impact and thermal fusion.

  • Enclosure is formed of stainless steel.

  • Built-in electronic ballast, power factor 0.95.

  • LED driver, wide voltage input, CC-CV (constant current constant voltage) output, power factor 0.95.

  • End of lamp life (EOL) rectication effect protection.

  • Emergency function is available on request.

View Complete Details

LED TANK INSPECTION VESSEL LIGHT FITTINGS


  • Explosion protection to
    -CENELEC
    -IEC
    -NEC

  • Can be used in
    Zone 1 and Zone 2
    Zone 21 and Zone 22

  • Applicable lamp and power:
    LED lamps, energy-saving and long service life, 9W

  • Enclosure in copper-free aluminium, powder coated surface, yellow (RAL1021).

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shijina (ASWATHY CORPORATION)
  • 107-110, Ashok Service Industrial Estate, L.B.S. Marg, Bhandup (West), Pin 400 078 MUMBAI, Maharashtra, Bhandup West - 400078
  • Share us via
Retailer of Light Fitting from MUMBAI, Maharashtra by ASWATHY CORPORATION
Post Buy Requirement
AC
MUMBAI, Maharashtra, India
Add Review

Light Fitting #207431

Flameproof Fluorescent Light Fittings

Two enclosure types separately for 42W and 68W compact energy-saving lamps, with good performance including rapid starting, ash free, high lighting efficiency, long service life and energy saving, etc, The luminous intensity of a 42W compact energy-saving lamp equals an 80W mercury lamp; the luminous intensity of a 68W compact energy-saving lamp equals an 125W mercury lamp.
View Complete Details

EMERGENCY EXIT LIGHT FITTINGS

  • Explosion protection to-CENELEC-lEC-NEC
  • Can be used inZone 1 and Zone 2Zone 21 and Zone 22Class I, Zone 1 and Zone 2Class I, Division 1, Groups C, D
  • Lighting both in normal condition and emergency condition; When the power supply is cut off, the light illuminates; provided with overcharge, over-discharge and short circuit protection.
  • Designed with test button and sleep button. Press the test button and the lamp will enter emergency mode. The sleep button turns off the lamp, re-press the button and the lamp turns on and returns to operating status.
  • Ultra-bright LED lamp, low power consumption and long service life up to 50, 000 hours; energy saving and environmentally friendly.
  • Enclosure in copper-free aluminium, powder coated surface, yellow (RAL 1021).
  • Toughened glass resistant to temperature changes.
View Complete Details

EXPLOSION-PROOF ANNULAR LIGHT FITTINGS

  • Explosion protection to-CENELEC-lEC-NEC
  • Can be used inZone 1 and Zone 2Zone 21 and Zone 22Class I, Zone 1 and Zone 2Class I, Division 1, Groups C, D
  • Power: 21W x1, 21W x 2.
  • Enclosure in copper-free aluminium, powder coated surface: yellow (RAL1021)
  • Powder coated wire guard: white.
  • Toughened glass cover resistant to temperature changes.
View Complete Details

EXPLOSION-PROOF LUSTRATION LIGHT FITTINGS FOR FLUORESCENT LAMPS

  • Explosion protection to-CENELEC-IEC-NEC
  • Can be used inZone 1 and Zone 2Zone 21 and Zone 22Class I, Zone 1 and Zone 2Class I, Division 2, Groups A, B, C, D
  • Two protection type: Ex e q and Ex nA; Two enclosure types for Ex e q, six enclosure types for Ex nA.
  • No Ex e q protection for LED light fittings
  • Toughened glass transparent cover, high light transmittance, resistance to high energy impact and thermal fusion.
  • Enclosure is formed of stainless steel.
  • Built-in electronic ballast, power factor 0.95.
  • LED driver, wide voltage input, CC-CV (constant current constant voltage) output, power factor 0.95.
  • End of lamp life (EOL) rectication effect protection.
  • Emergency function is available on request.
View Complete Details

LED TANK INSPECTION VESSEL LIGHT FITTINGS

  • Explosion protection to-CENELEC-IEC-NEC
  • Can be used inZone 1 and Zone 2Zone 21 and Zone 22
  • Applicable lamp and power:LED lamps, energy-saving and long service life, 9W
  • Enclosure in copper-free aluminium, powder coated surface, yellow (RAL1021).
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shijina (ASWATHY CORPORATION)
  • 107-110, Ashok Service Industrial Estate, L.B.S. Marg, Bhandup (West), Pin 400 078 MUMBAI, Maharashtra, Bhandup West - 400078
  • Share us via