Cooling Tower #2478096

BCS is one of the leading manufacturers of compact and space saving FRP cooling towers. In FRP cooling towers, multiple fibers are joined mutually and are available in form of mat. The mat is joined together with polyester resin, accelerator and catalyst. We deal with both Round Shaped and Square shaped towers

Round Shaped FRP Cooling Towers

Being round, the airflow through the towers is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermodynamically the most efficient design in the field. This translated directly into reducing running costs. The towers offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the towers over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

Square Shaped Cooling FRP Cooling Towers

The FRP square type Cooling towers we offer have fixed targeted nozzles in the hot water basin. They are designed meticulously for water distribution and are highly resistant to temperature and weathering. The use of targeted nozzles eliminates the need for separate diffusion deck. These FRP square type cooling towers are preferred for minimum drift losses, easy accessibility of internal components, high thermodynamic efficiency and low power requirements. Easy to maintain, these FRP square type cooling towers can be installed on rooftops.

Fan and Motor are mounted on the top of the frame. Fan has been dynamically balanced with the motors rotation RPM.After the manufacture of the coil, BCS conducts a Hydro-Pressure Test to see if there are any leakage in the tubes.Tube bending joints are brazed by qualified welders. In this bended area thinning calculated for min thickness at the particular area.

Cooling tower transfers heat from hot water to dry air by means of convection and evaporation and are often part of a total cooling package in combination with one or more of our heat exchangers. We can produce a complete turnkey system with the cooling tower, heat exchanger, water pumps, fan motor, fluid temperature controllers, variable speed fan drives, pressure and temperature gauges, automatic water treatment, all mounted on one galvanised skid needing only connection to power and water. The cooling towers are built with safety in mind as well as performance. Very low noise level cooling towers are available.

Natural Draft cooling towers are inevitable for the economic generation of electricity under environmental aspects. Our natural draft wet cooling towers have been used to cool water, primarily in energy production, for almost 2 decades.

The tower operates on the stack effect which causes the hot air in the tower to naturally draft. The necessary stack can be designed in various ways. For both technical and cost reasons, reinforced concrete structures have become standard to handle the high cooling water flow rates from increasingly large power generating units.

The required air stream volume for cooling is exclusively produced by the stack effect. The unique economic advantage of natural draft cooling towers lies in their very low electric energy requirement this makes the operating costs minimal. The almost complete lack of moving parts allows for high operating reliability and minimal maintenance requirements and owing to the height of the warm air outlet point the surrounding area remains untroubled by effects of the cooling system. Natural Draft Cooling Tower are especially used power plants and industries with unlimited cooling water flow.