Input (Single or dual): Voltage(ACDC) Current(ACDC) Power( KWW) â�¢ Transmission OP (DualSingle): Linear current (4 20 mA) or voltage (0-10VDC) â�¢ Power supply: 230VAC or 110VAC , 50 Hz â�¢ Re transmission accuracy: 0.2%FS�± 1 Digit...
Application : Clean Room& HVAC , building management systems, museums, libraries etc.
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped with the tried-and-tested Hygromer® IN-1 sensor and boast unbeatable value for money. The optional ROTRONIC HW4 software enables...
Application : HVAC & Building Automation Systems, Food Stores, Health Inspection Agencies, Warehouse Mapping, Paper, Textile and Pharmaceuticals Industries.
Measures Humidity, Temperature and Calculates Dew Frost Point Temperature Compensated humidity signal Standard Scaling : 4â¦20mA = 0...100%rh -50...200 ºC Temperature Ready for direct 3 - wire RTD connection housing and can also be supplied in an industry standard IP65...
79 x 49 x 150 mm (3.1 x 1.9 x 5.9”) : 150 g (5.3 oz.)
0% (4 mA) to 100% (20 mA) : ±2% (5% to 95% RH)
HI8666 is supplied with built-in RH sensor, protective sintered cap for RH sensor, mounting brackets and instructions. : Power Supply: 10-30 Vdc
Output Signal: 4 to 20 mA
Panel Cutout: 73 x 42 mm (2.9 x 1.6")
±1% FS : 0 to 60°C (32 to 140°F)
6 seconds without sintered cap; 60 seconds with sintered cap : -20°C (4 mA) to 60°C (20 mA)
How many Transmitter Device product listings are available in Chennai?
In Chennai, there are currently 72 Transmitter Device products listed, offering a wide options available for purchase.
How many Chennai-based Transmitter Device manufacturers are there?
There are many Transmitter Device manufacturers in Chennai. You can explore ExportersIndia to find them and use filters to your search as per your specific requirements.
Feature : 4 to 20mA, HART, Loop Powered .Accuracy ± 0.075% (option ± 0.04%) of CS* .3 lines LCD display, Self Diagnostic Function, External Buttons, DAC, Zero Trim, Eng mode
Model Type : APT3200-G/F
Application : Pressure, Level measurement for Oil & Gas(up & down stream), Liquid, Water, Maine & offshore, Vessel, Power, Chemical Plants and Refinery
Certificate : SIL2 (TUV, FMEDA), Ex d, Ex ia, FM, ATEX, TR CU(EAC), INMETRO, CE, Rohs, BV, LR, KR, DNV, ABS, KCs, IP66/67, NEMA 4X
Max. Working Pressure : Max 75 MPa / 10,877 psi
Number Of Flower : Gauge/ Absolute(PIT), Level (LIT), High Static pressure
We are offering Honeywell�s SmartLine smart pressure measurement system sets the standard for total performance in harsh process environments, featuring the industry�s most modular and robust pressure transmitters. The line includes...
We offer siemens sitrans t temperature transmitter . Easy integration in your system with 4 - 20 ma, hart, profibus pa, foundation fieldbus as well as wireless hart • extended diagnostics • maintenance benefits contact us today for cost...
We offer SIEMENS SITRANSP Family for gauge, differential and absolute pressure from 1mbar to 700 bar. ⢠Outstanding Measuring accuracy ⢠Outstanding Turndown ratio ⢠Long term stability ⢠Industry: Energy, Chemicals, Oil & Gas,...
Measuring range : from 0/+100 Pa to -1000/+2000 mBar Configurable intermediary and center zero range Range Scalable , unit selectable , ABS IP 65 Housing Unit : Pa, mm H²O, mbar, inWG, mmHg, Kpa, PSI Dip switch selection , With or with out display...
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped with the tried-and-tested Hygromer® IN-1 sensor and boast unbeatable value for money. The optional...
Measures Humidity, Temperature and Calculates Dew / Frost Point Temperature Compensated humidity signal Standard Scaling : 4…20mA = 0...100%rh / -50...200 ºC Temperature Ready for direct 3 - wire RTD connection housing and can also be supplied in...
Our combo 2-in-1 humidity and temperature transmitters are perfectly dependable for your industrial automation needsthat require these two parameters to be measuredsimultaneously. Thedesign of these transmitters ensuresexcellent reliability,...
Our temperature transmitters primarilyprovide cutting-edge quality, reliability, and stability.Our temperature transmitters are capable of interfacing with a wide array of temperature sensors, and after processing, they provide standardized...
Differential Pressure Transmitters bring smart technology to a wide spectrum of measurement applications ranging from furnace combustion airflow rate to hydrostatic tank gauging. The differential pressure transmitters can be used with any primary...
Effective control and monitoring of a process requires accurate and consistent measurement of different process variables. Multivariable Flow Transmitter measures the flow of virtually any liquid, gas or slurry for which a primary flow element...
Our range of pressure transmitters sets the standard for total performance. The pressure transmitters feature industry-leading performance for tighter process control. They also offer the lowest total cost of ownership through a unique modular...
Measures Humidity, Temperature and Calculates Dew Frost Point Temperature Compensated humidity signal Standard Scaling : 4â¦20mA = 0...100%rh -50...200 ºC Temperature Ready for direct 3 - wire RTD connection housing and can also be supplied in...
U5100 series pressure transducers from the Microfused™ line of MEAS over voltage protected to 16Vdc in both positive and reverse polarity solid piece of 17-4PH stainless steel (316L optional) withstands more than 10 million pressure cycles without...
CO2 , relative humidity (RH) and temperature (T) measurement in one housing new standards in CO2 measurements for HVAC version for CO2 and T can be easily extended with a RH plug-in module energy efficiency, long-term stability and reproducibility...
Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4-20 mA output signal. The Series 211 Differential Pressure Transmitter is not position sensitive and can be mounted in...
Transmitter Accept input RTD, Thermocouple Transmitter output available 4-20 mA ( 234 wires) Out put Range -999 to 9999 counts DIN Rail Head mounting , Power supply : 12-36 VDC (or )230 VAC Output Load at 20 mA , 600 ohms maximum @ 24 VDC With...
Microcontroller based design Configurable through configurator One model for both T/Cs & RTDs Linearisation of T/C and RTD inputs Realistic Cold Junction Compensation Input to output isolation IP-65 weather proof enclosure...
Pressure Transmitter [2600 Series] Overview / Design Principle: The 2600 series pressure transducer features stability and accuracy in a variety of enclosure options and extends the packaging options via an all welded stainless steel back end...
Pressure Transmitter [4000 Series] Overview / Design Principle:- The 4000 series provides exceptional levels of stability and other performance specifications in a wide variety of enclosures from submersible to differential styles. By using a...
Pressure Transmitter [ELS-1200 Series] Overview / Design Principle: High pressure liquid processes can now be monitored effectively with very little intrusion into tanks or piping. ELS-1200 level switch units feature fused glass prisms...
we offer pressure transmitter. stw’s latest pressure transmitter, the m01-can, was especially developed for automotive, off-highway applications. the wetted parts, the complete sensor element welded to the pressure connections, are made of...