Chengdu Lift Machinery & Electrical Equipment Co., Ltd.

• MOQ 1 Set(s)

We are offering copper rod continuous casting and rolling line. This line is designed to produce ã��8mm low oxygen and bright copper rods by means of continuous casting and rolling. The raw material is cathode copper or red copper scraps. This line is composed of one or two 6-100 ton stationary reverberatory furnace(s), five-wheel casting machine, pulling machine, rolling shearer, straightener & angle shaver, cast bar brushing machine, rolling machine, bright rod orbital coiler, electrical control system, etc. The 12th melting shaft furnace and 12t holding furnace are provided when copper cathode are used. 4. main technical data 1) outlet copper rod dia. ã��8mm 2) production capacity around 16th 3) coilã¢ï¿½ï¿½s weight 3.0-5.0 ton 4) main equipment total size: 42x7.8x5.1m (melting furnace and recycling cooler & filter excluded) 5) main equipment total weight( melting furnace excluded) 82 ton 6) main equipment total power(melting furnace excluded) 600kw 5. line composition 1) five-wheel continuous casting machine (patent no. Zl00244512.3) 1 set 2) automatic shearer 1 set 3) straightening & shaving machine 1 set 4) cast bar brushing machine 1 set 5) automatic feeding continuous rolling mill 1 set 6) continuous rolling mill emulsion lubrication system 1 set 7) rolling mill oil lubrication system 1 set 8) coiler 1 set 9) electrical control system 1 set

• MOQ 1 Set(s)

We are offering continuous lead-sheathing extruder. this continuous lead-sheathing extruder system is for lead sheath extrusion of cables and lead covering of vulcanization of rubber tubes. diameter range of lead sheath extruded is from 10mm to 110mm. There are two types of die rack. One is for dia. Between 10mm to 80mm, and another is for dia. Between 40mm to 110mm. Customer could choose one type or both types 1. main composition: 18-ton lead smelter 10-ton holding & cleansing furnace vertical type lead sheath stripper lead strip conveyor & feeder main engine and extruder take-up control panel 2. main technical data: diameter of lead sheath extruder screw: 150mm cooling water capacity: 6.8t/h rotate speed of screw: 5-150rpm total power: 145kw turnout of lead extruder: pure lead (13-15rpm): 30-35kgs/min soft alloy (11-12rpm): 20-22kgs/min hard alloy (9-10rpm): 15-16kgs/min power of 18-ton lead smelter: 141.1kw power of 10-ton holding cleansing furnace: 101.1kw power of vertical type lead sheath stripper: 15kw power of lead strip conveyor & feeder: 1.5kw diameter range of lead sheath: a die stator fame 10-80mm b die stator fame 40-110mm dia. Range of drum of take-up: ф250-ф2500 capacity of 18-ton lead smelter: 18ton overall size: 22000 x 13340 x 5100mm capacity of 10-ton holding & cleansing furnace: 10ton total weight: 41100kgs.

• MOQ 1 Set(s)

We are offering tubular stranding machine. This tubular stranding machine is applied to copper wire, steel core, al wire or steel cable twisting. And it is also suitable for al-clad steel and al alloy twisting. this machine has high mechanical, high reliable, high production efficiency with low energy consumption. It is with compact composition, easy to operation and low running noise. main technical specification 1. single wire diameter: φ1.3-φ5.0mm 2. max. Stranding dia.: φ21mm 3. max. Rotating speed of the tubular: 600r/min 4. drawing wheel diameter: φ1250 (duel wheel )mm 5. pulling wire speed: 15.7-246m/min 6. pitch range: 40.22-448.07mm 7. direction of stranding: two directions, left and right 8. main motor (alternation frequency conversion motor frequency conversion adjusting speed) y280-8b3 740r/min 45kw (ac vs) 9. take-up motor bpy132s-4, 5.5kw frequency conversion motor 10. outlet wire speed 15-110m/min 11. front pay-off reel φ630 x φ355 x 475 (hole 127)mm φ1000 x φ490 x 710 (hole 80) mm 12. pay-off reel in the tubular φ630 x φ355 x 475 (hole 127)mm 13. take-up bobbin pn800-pn2000mm 14. overall size 23850 x 2680 x 1626mm.

• MOQ 1 Set(s)

We are offering aluminum and alloy rod breakdown machine. This machine is designed to draw the 9.5mm aluminum and alloy rod into 2.2-4.5mm aluminum wire. It adopts straight line arrangement, continuous drawing, mechanical and electrical speed matching. This machine is easy to operate with fast mold changing and auto reel-changing take-up. It has high efficiency and high quality production. 2. main technical data 1) inlet wire diameter: φ9.5 mm 2) outlet wire diameter: φ2.6-4.5mm(aluminum and alloy) φ2.2-4.7mm (normal aluminum) 3) max. Speed: 22m/s 4) drawing wheel diameter: φ450mm 5) max. Drawing pass: 13 6) max. Accumulating wire length: 7m 7) take-up bobbin pnd630-800(din46397) 8) drawing wire main motor: 315kw (dc) 9) motor for finish capstan: 75kw (dc) 10) take-up motor 2x30kw(dc).

• MOQ 1 Set(s)

We are offering slide vertical continuous annealing copper rod breakdown machine. The line is mainly used to draw from dia.8mm copper rod to dia.1.3-4.0mm copper wire. And it also can continuously anneal when the drawing. The products produced from this line accord with gb3953 requirements. main data: 1) diameter of inlet wire: φ8 mm (cool rolling solid copper rod) 2) diameter of outlet wire: φ1.3-4.0mm 3) no. Of drawing mold: 13 4) diameter of drawing wheel: φ450mm x φ400mm x 65mm 5) max speed of outlet wire: 25m/s 6) annealing method: dc annealing 7) main motor: 280kw (dc), 1000r/min 8) motor z4-200-31 for capstan with fixed speed: 90kw(dc), 1500r/min 9) power of motor for take-up with double reels: z4-132-3, 22kw (dc, 2 sets) 10) annealing power: 360kva (max.) composition of the equipment 1) pay-off frame with column and rocker 1 set 2) main machine for drawing with horizontal sliding 1 set 3) device for horizontal continuous annealing 1 set 4) device for tension controlling of accumulator 1 set 5) take-up machine with double reels 1 set 6) take-up machine in the way of loop 1 set 7) machine for crushing head through mold 1 set 8) electrical control system 1 set 9) steam generator 1 set 10) lubricating system for gear box 1 set.

• MOQ 1 Set(s)

We are offering aluminum and aluminum alloy rod continuous casting and rolling line. the line is designed to produce aluminum rod or aluminum alloy rod by means of continuous casting and rolling. The material is pure aluminum ingot, electrolytic molten aluminum or aluminum alloy. And the produced rod diameters are ð¤9.5mm, ð¤12mm and ð¤15mm. main components: four-wheel type casting machine, active fore traction, automatic shearer, active straightening device, frequency doubling induction heater, active feeding device, 2+12 aluminum alloy rod continuous rolling machine, conic pipe rolling wheel drum type rod guiding coiler, dual-basket rod take-up, continuous casting and rolling line electrical control system, continuous rolling machine lubricating oil system, continuous rolling machine lubricating oil system, continuous rolling machine emulsion circulation system etc. main technical data 1. produced rod diameter: ð¤9.5mm, ð¤12mm, ð¤15mm 2. max. Theoretic production capacity: 5.278t/h (ð¤9.5mm aluminum or aluminum alloy rod) 3. main equipment dimension: 40x7.8x5.1m (excluding furnace and cooling circulation system) 4. main equipment weight: 65 tons 5. total power: 800kw.