Province, China
Write a Review
Our Products
Our Complete range of products are Cap Type Splice Closure, Horizontal Insert Plate Type Splice Closure and Non Removeable Screw Type Splice Closure.
Dimension & Capacity
| Outside dimension (LxWxH) | 390X210X120 |
|---|---|
| Weight (excluding outside box) | 1900g - 2100g |
| Number of inlet/outlet ports | 6 ports |
| Diameter of fiber cable | φ7 - φ16(mm) |
| Capacity of FOSC | Bunchy : 6 - 96(Cores) Ribbon : max. 144 (Cores) |
Main Components
| Name of components | Quantity | Usage | Remarks |
|---|---|---|---|
| Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter : 285x110 (mm) |
| Insert plate | 2 pairs | Fixing the housing | 175x56x30(mm) |
| Fiber optic splice tray (FOST) | Max. 4 trays (bunchy) Max. 4 trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for : Bunchy : 6,8,12,16,24(cores) Ribbon : 3 (pieces) |
| Foundation | 1 set | Fixing fiber cable, reinforced core and FOST | |
| Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
| Port plug | 6 pieces | Sealing empty ports | |
| Earthing deriving device | 1 set | Deriving metallic parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
Main Accessories & Special Tools
| Name of Accessories | Quantity | Usage | Remarks |
| Heat Shrinkable Protective Sleeve | Protecting fiber splices | Configuration as per capacity | |
| Nylon Tie | Fixing fiber with protective coat | Configuration as per capacity | |
| Earthing Wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| Abrasive Cloth | 1 piece | Scratching fiber cables | |
| Labeling Paper | 1 piece | Labeling fibers | |
| Special Wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | |
| Measuring Paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| Seal Tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| Insulation Tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| Metal Hoop | 1 set | For wall mounting and pole hugging | |
| Buffer Tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| Desiccant | 1 bag | Put into FOSC before sealing for desiccating air |
Dimension & Capacity
| Outside dimension (LxWxH) | 470x180x125 (mm) |
|---|---|
| Weight (excluding outside box) | 2650g - 2975g |
| Number of inlet/outlet ports | 3 (pieces) on each side (total 6 pieces) |
| Diameter of fiber cable | φ8 - φ20 (mm) |
| Capacity of FOSC | Bunchy : 12 - 96 (Cores) Ribbon : max. 144(Cores) |
Main Components
| Name of components | Quantity | Usage | Remarks |
|---|---|---|---|
| Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter : 320x120x100(mm) |
| Fiber optic splice tray (FOST) | max. 6 pcs (bunchy) max. 4pcs (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for : Bunchy :12,24(cores) Ribbon : 3 (pieces) |
| Foundation | 1 set | Fixing reinforced core of fiber- cable and FOST | |
| Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom | |
| Port plug | 6 pieces | Sealing empty ports | |
| Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing connection | Configuration as per requirement |
Main Accessories & Special Tools
| Name of Accessories | Quantity | Usage | Remarks |
| Heat Shrinkable Protective Sleeve | Protecting fiber splices | Configuration as per capacity | |
| Nylon Tie | Fixing fiber with protective coat | Configuration as per capacity | |
| Earthing Wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| Abrasive Cloth | 1 piece | Scratching fiber cables | |
| Labeling Paper | 1 piece | Labeling fibers | |
| Special Wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | |
| Measuring Paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| Seal Tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| Insulation Tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| Metal Hoop | 1 set | For wall mounting and pole hugging | |
| Buffer Tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| Desiccant | 1 bag | Put into FOSC before sealing for desiccating air |
Dimension & Capacity
| Outside dimension (Height x Diameter) | 430mm x 190mm |
|---|---|
| Weight (excluding outside box) | 2500g - 3100g |
| Number of inlet/outlet ports | 4 pieces |
| Diameter of fiber cable | φ8mm ~ φ16 mm |
| Capacity of FOSC | Bunchy : 12-96 (cores), Ribbon : up to 288 (cores) |
Main Components
| Name of components | Quantity | Usage | Remarks |
|---|---|---|---|
| FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height x Diameter 355mm x 150mm |
| Fiber optic splice tray (FOST) | Max. 6 trays (bunchy) Max. 4 trays (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for : Bunchy :12,24(cores) Ribbon : 6 (pieces) |
| Fiber holding tray | 1 pcs | Holding fibers with protective coat | |
| Base | 1set | Fixing internal and external structure | |
| Plastic hoop | 1 set | Fixing between FOSC cover and base | |
| Seal fitting | 1 pc | Sealing between FOSC cover and base | |
| Seal rings for inlet/outlet ports | 4pcs | For the inner seal of inlet/outlet ports; the diameter is 12.5mm,can shrink to 7mm | |
| Pressure testing valve | 1 set | After inject air, it is used for pressure testing and sealing testing | Configuration as per requirement |
| Earthing deriving device | 1 set | Deriving metal parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
Main Accessories & Special Tools
| Name of Accessories | Quantity | Usage | Remarks |
| Heat Shrinkable Protective Sleeve | Protecting fiber splices | Configuration as per capacity | |
| Nylon Tie | Fixing fiber with protective coat | Configuration as per capacity | |
| Earthing Wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
| Abrasive Cloth | 1 piece | Scratching fiber cables | |
| Labeling Paper | 1 piece | Labeling fibers | |
| Special Wrench | 2 pieces | Installing and tightening nut of reinforced core and nut (plastic) of inlet/outlet tube | |
| Measuring Paper | 1 piece | To measure perimeter, of which its diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
| Seal Tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring. | Configuration as per specification |
| Insulation Tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| Metal Hoop | 1 set | For wall mounting and pole hugging | |
| Buffer Tube | decided by customers | Hitched to fibers and fixed with FOST, managing buffer. | Configuration as per requirement |
| Desiccant | 1 bag | Put into FOSC before sealing for desiccating air |
Mr. Jimmy (Ningbo Full-link Photoelectric Limited)Easter Garden of Guanhaiwei Industrial Zone, Cixi City, Zhejiang, Province, China
Share us via
